Furniture of America HC-7032 User manual

GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
VERSION # 21-4-21

2 / 12
Please review the assembly instructions and all
diagrams prior to assembling. Position parts in order
and group identical hardware together for an easier
assembly experience.

3 / 8
3 / 12

4 / 8
4 / 12

HARDWARE
(21)X1 (22)X1 (23)X1
(13)X2 (14)X2 (16)X2(15)X4
(17)X1 (18)X1 (20)X1(19)X4
(A)X22
(F)X6 (G)X4 (H)X1 (I)X1
1/4*12
M5*15 K4
(B)X8
1/4*30
(C)X6
1/4*51 M4*12
(E)X8
6 / 8
6 / 12
(D)
(E)
(F)
(G)
(H)

7 / 12
1) Align the holes of the frames (#2)
to bars (#14).
2) Align bars (#3) to the frame, then
secure by using bolts (#A).
Align legs (#1) to the frame, then
secure by using bolts (#C). Attach caps
(#15) onto the legs (#1).

8 / 12
Align support brackets (#5,6) to the frame
and legs, then secure by using bolts
(#A,C) as shown in the diagram. Secure
levelers (#F) onto the legs and adjust
them according to the ground level.
Align top panels (#7,8) flush together, then align
brackets (#4) to the top panels (#7,8). Secure by
using bolts (#A).
F
Before tightening the screw, you must ensure
that the two desktop pieces are aligned and
pressed firmly against each other.

9 / 12
Align frame with legs to the top panel, then
secure by using bolts (#B).
Align wire holder (#20) to the top panel,
then secure by using screws (#E).
Align holders (#21,22) to the top panel,
then secure by using bolts (#A).

10 / 12
Align leg caps (#9,10) onto legs, then use
either bolts (#A) or screws (#E) to secure leg
caps (#9,10) onto legs.
Insert wire caps (#16) to the top panel. Align
top panel caps (#11,12,13) to the top panel,
then secure by using screws (#D).