Furniture of America CM3492PT User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 8
(Not Included)
Philips
Screwdriver
TOOLS REQUIRED
Recommended
MODEL #
CM3492PT
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
VERSION # 21-01-26

2 / 8
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 8
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 8

COUNTER HEIGHT TABLE
CM3492PT
#1 1pc
Table Top Table Leg
#2 2pcs #3 2pcs
#A 4pcs
M6 x 60MM
Bolt
#B 8pcs
#F 8pcs
5 / 8
#G 1pc
M4 Allen Wrench
#5 1pc
Lower Shelf Leg Support
#6 1pc
#C 4pcs
#H 1pc
M5 Allen Wrench
#D 8pcs
#I 1pc
M6 Adjuster
Base Leg
#E 4pcs
M8 x 60MM
Bolt M6 x 13MM
Spring Washer M8 x 14MM Spring Washer M6 x 19MM
Flat Washer
M8 x 22MM
Flat Washer
#J 4pcs
M4 x 45MM
Pan Head Screw
#4 2pcs
Side Stretcher
Table Leg

ASSEMBLY INSTRUCTIONS
1
2
Part #4 x2pcs
Part #5 x1pc
Hardware #C x4pcs
Hardware #E x4pcs
Part #1 x1pc
Hardware #B x4pcs
6 / 8
Hardware #G x1pc
Hardware # I x1pc
Hardware #D x4pcs
Hardware #F x4pcs
Hardware #H x1pc
Part #6 x1pc
Part #2 x1pc
Hardware #A x4pcs
Part #3 x1pc
#G
#A
#C
#E
#4
#I
#6
#4
#5
#3
#2
#1
#F
#D
#B
#H
Align side stretchers (#4) to the
lower shelf (#5), then secure by
using bolts (#A) with washers
(#C,E). Align and attach support
leg (#6) to the shelf (#5) and
leveler (#I).
Align legs (#2,3) to the top (#1), then
secure by using bolts (#B) with
washers (#D,F).

ASSEMBLY INSTRUCTIONS
3
4
7 / 8
Hardware #B x4pcs
Hardware #D x4pcs
Hardware #F x4pcs
Hardware #H x1pc
Part #2 x1pc
Part #3 x1pc
#2
#3
#F
#D
#B
#H
Align stretcher shelf to the legs.
Align legs (#2,3) to the stretcher
shelf and table top, then secure
the legs (#2,3) to the table top by
using bolts (#B) with washers
(#D,F).

ASSEMBLY INSTRUCTIONS
5
6
Hardware #J x4pcs
8 / 8
#J
Secure stretcher shelf onto legs by using
screws (#J).