Furniture of America Jamestown CM3487SV User manual

CM3487SV
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 9
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 21-01-11
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOAIntro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 9

4 / 9

#1 1pc
Top Panel
#A 8pcs
Jcbb Screw
M8x70MM
#B 8pcs
Lock Washer
5/16''
#C 8pcs
Flat Washer
5/16''
#D 16pcs
#E 1pc
P.H Screw
#8 x 32MM
#F 16pcs
#2 1pc
Bottom Panel
#3 4pcs
Leg
#4 2pcs
Side Panel
#5 2pcs
Center Panel
#6 1pc
Shelf Panel
#7 2pcs
Door Panel
Left & Right
#8 1pc
Shelf Panel
#9 1pc
Back Panel
Wood Dowel
Ø8x30MM
5 / 9
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
SERVER
CM3487SV
PARTS
HARDWARE
M5
Allen Wrench

1
2
Part x1pc
#2
Hardware x4pcs
#A
Part x2pcs
#5
Hardware x16pcs
#D
Part x4pcs
#3
#3
Hardware x4pcs
#B
Hardware x4pcs
#C
Hardware x1pc
#E
#2
#E
#A #B #C x4
#4 #5
#5
#4
#D x16
Part x2pcs
#4
6 / 9
Align legs (#3) to bottom panel
(#2), then secure by using bolts
(#A) with washers (#B,C).
Insert dowels (#D) to side and center
panels (#4,5), then align the panels
(#4,5) to the bottom with legs.

3
4
5
#F
Hardware x8pcs
#F
Part x1pc
#9
#9
7 / 9
Secure center panels (#5) to
bottom by using screws (#F).

5
6
#2
#F
Part #2 x1pc
Hardware #F x8pcs
#1
#C
#B
#A
#E
Part x1pc
#1
Hardware x4pcs
#A
Hardware x4pcs
#B
Hardware x4pcs
#C
Hardware x1pc
#E
8 / 9
Align top (#1) to the legs, then
secure by using bolts (#A) with
washers (#B,C).

7
UNLOCK THE DOOR BEFORE
PLACING THE DOOR PANEL(7)
INTO THE FLUTE THEN PUSH
BUTTON LOCK TO ENSURE THE
DOOR STAY BETWEEN THE
FLUTE.
LOCK UNLOCK
BUTTON
LOCK
Part x1pc
#6
#7
Part x2pcs
#7
#6
9 / 9