Furniture of America FOA-BK972 User manual

1 / 14
MODEL #
FOA-BK972
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-01-15
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X14

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X14

4/ 14

FOA-BK972
#1 2pcs #2 2pcs #3 1pc
#5 1pc #6 1pc #7 1pc
#4 1pc
#8 1pc
#9 2pcs #10 2pcs #11 3pcs #12 1pc
Headboard Foot Of The Bed
Lower Front
Side Rail
Back Guardrail Ladder Rail (L)
#13 1pc #14 3pcs #15 2set
Twin Slats Kit
(13pcs)
Ladder Rail (R) Ladder Rung
Foot Of The Bed
(L) Foot Of The Bed (R)
Lower Back
Side Rail Upper Front Side Rail Upper Back Side Rail
Front Guardrail Guardrail Support
BUNKBED
5 / 14

#1
#1
#2
#3
#4
#2
#5
#7
#6
#8
#9
#10
#11
#12
#13
#14
#15
#15
#A 12pcs #B 12pcs #C 6pcs #D 9pcs
#E 16pcs #F 9pcs #G 6pcs #H 24pcs
#I 6pcs #J 16pcs #K 20pcs #L 1pc
Bolt
Ø1/4" x 3-1/8" Barrel Nut
Ø1/4" x 1/2" Bolt Ø1/4" x 1-9/16"
Screw
#4 x 15mm Allen Wrench 4mm
Hex Cap
Ø1/4" x 5/8"
Screw
#4 x 30mm
Iron Bas
Wood Dowel
Ø10x40mm
Bolt
Ø1/4" x 1-3/16"
Bolt
Ø1/4" x 3/4" Screw
Ø1/4" x 2"
6 / 14

Carton Disignation Part Hardware
CM-BK972-1
Headboard (2pcs)
CM-BK972 is packed in 3 cases
Foot Of The Bed
(2pcs)
Foot Of The Bed(L)
Foot Of The Bed(R)
CM-BK972-3 Twin Slats Kit
(2set)
CM-BK972-2
Lower Front Side
Rail
Lower Back Side
Rail
Upper Front Side
Rail
Upper Back Side
Rail
Back Guardrail
(2pcs)
Front Guardrail
(2pcs)
Guardrail Support
(3pcs)
Ladder Rail (L)
Ladder Rail (R)
Ladder Rung
(3pcs)
#A x 12pcs
#B x 12pcs
#C x 6pcs
#D x 9pcs
#E x 16pcs
#F x 9pcs
#G x 6pcs
#H x 24pcs
#I x 6pcs
#J x 16pcs
#K x 20pcs
#L x 1pc
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
#15
7 / 14

ASSEMBLY INSTRUCTIONS
1
2
8 / 14
Part #1 x1pc
Part #2 x1pc
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #H x4pcs
Part #3 x1pc
Part #1 x1pc
Part #2 x1pc
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #H x4pcs
Part #4 x1pc
#3
#2
#1
#A
#H
#B
#L
#1
#4
#2
#A
#H
#B
#L
Insert dowels (#H) to headboard (#1), then
align HB legs (#2,3) to the headboard (#1).
Secure by using bolts (#A) onto barrel nuts
(#B).
Insert dowels (#H) to headboard (#1), then
align HB legs (#2,4) to the headboard (#1).
Secure by using bolts (#A) onto barrel nuts
(#B).

ASSEMBLY INSTRUCTIONS
3
4
9 / 14
Part #5 x1pc
Hardware #H x8pcs
#H
#3 #1 #2
#5
#6
#2
#1 #4
#8
#7
Part #6 x1pc
Part #7 x1pc
Part #8 x1pc
Part #9 x2pcs
#K
#K
#E
#E
#L
#L
Hardware #E x16pcs
Hardware #K x8pcs
#9
Insert dowels (#H) onto back
guardrails (#9), then align and
attach rails (#5,6,7,8,9) to the
headboard legs (#2,3,4).
Secure rails by using bolts (#E) with
screws (#K).

ASSEMBLY INSTRUCTIONS
5
6
10 / 14
Hardware #H x4pcs
Part #10 x2pcs
#10
#H
#F
#D
#L
#11
#11
Hardware #D x9pcs
Part #11 x3pcs
Hardware #F x9pcs
Insert dowels (#H) to guardrails
(#10), then attach guardrails (#10)
to HB leg.
Align guardrail supports (#11) to the
guardrails, then secure by using bolts
(#D) onto hex caps (#F).