Furniture of America FOA7225-Q User manual

MODEL #
FOA7225-Q
Questions?
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
2 - People
Recommended
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
1 / 9
VERSION # 22-04-15

2 / XXXXXXX9
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX9
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / XXXXXXX9

QUEEN SIZE BED
5 / 9
Headboard
#2 1pc
Headoard Leg
(L/R)
#3 2pcs
Side Rail
#B 6pcs
Footboard
Allen Key M4
Bed Slat with Marking
-1545 x 45 x 18mm
Bed Slat Support
-230 x 30 x 30mm
Bed Slat without Marking
-1545 x 45 x 18mm Concealed Panel
-2040 x 295 x 9mm
Bolt 1/4" x 1-3/8" Lock washer Flat washer
#F 5pcs
Bolt 1/4" x 2" Pan Head Screw
m3.5 x 20mm
#G 25pcs
Allen Key M4
#H 1pc
HARDWARE INSIDE HEADBOARD
HARDWARE INSIDE SIDE RAIL
CSK m4 x 32mm Allen Key M5
#I 1pc
FOA7225-Q

6 / 9
FOA7225-Q is packed in 2 cartons
#A x 1pc
Carton Designation HardwarePart
Queen Size
Bed HB, FB
& HB Legs
Queen Size
Bed Rails
#B x 6pcs
#C x 6pcs
#D x 6pcs
FOA7225-Q-1
FOA7225-Q-2 #E x 10pcs
#F x 5pcs
#G x 25pcs
#H x 1pc
#I x 1pc
X 2
X 2
X 2
X 3
X 5
X 5

ASSEMBLY INSTRUCTIONS
1
2
7 / 9
Part #3 x2pcs
Part #2 x1pc
Part #4 x2pcs
#C
Align Headboard Leg(#3) to Headboard(#1),
then secure by using JCBC (#B),Spring Washer (#C)and
Flat Washer (#D) tighten with Allen Key(#A).
L
R
Part #1 x1pc #B
#A
#D
Hardware #B x6pcs
Hardware #C x6pcs
Hardware #D x6pcs
#3
#1
Align side rails (#4) to the bolts of the headboard Leg (#3)
and footboard (#2). Fully tighten the bolts. #4 #I
#4 #2
#3

ASSEMBLY INSTRUCTIONS
3
4
8 / 9
Hardware #E x10pcs
#5
#7
#5 & #6
#7
adjustable glider
x 2
#5 & #6 #E
Align slats (#5,#6) evenly to the side rails,
then secure by using screws (#E)
#6
#7 x 3
Part #6 x3pcs
Part #5 x2pcs
#H
Marking Line
Hardware #F x5pcs
Part #7 x5pcs
#J
#5 #6 #6 #6 #5
Insert Bed Slat
Support (#7) unto
Bed Slats (#5, 6)
and secure using
Bolt (#F)

ASSEMBLY INSTRUCTIONS
5
9 / 9
#8
#4
#G
This is how the concealed panel (#8)
look like on the bed from a high view.
#6
#5
#8
1) Please refer to steps (#5) on how to
align and place concealed panels(#8)
correctly.
2) Secure concealed panels (#8) to
bed slats by using screws (#G).
Marking Line
#5
#6
#8
Part #8 x5pcs
Hardware #G x25pcs
Marking Line
HEADBOARD
FOOTBOARD