Furniture of America HFW-1694C4-TV User manual

Page 1 of 16 REV.16-03-08
HFW-1694C4-TV

Page 2 of 16

Page 3 of 16

Page 4 of 16

Page 5 of 16
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS

TV STAND
ASSEMBLY INSTRUCTIONS MODEL # HFW-1694C4-TV
please keep for future reference PARTS LIST
HARDWARE LIST
131PCS 231PCS 355PCS
(8x30)
42PCS
(8x50)
52PCS 612PCS
7
DIMENSIONS : 70.8"(W)*15.7"(D)*19.3"(H)
Page 6 of 16
12PCS
1PC
A
83SETS(12pcs) 924PCS 10 2PCS 11 2PCS 12 2PCS
Telescopic
13 14PCS
A
NC
P
O
K
J
D
I
1PC
B
1PCC2PCS
D1PC E1PC F
2PCSG2PCS
H2PCS
I2PCS
2PCS
K
J
3PCS
L1PC M1PC N
1PC 1PC
P
O3PCS 3PCS
R
Q
3PCSS3PCS
T1PC U4PCS V

STEP : 1
Hardware 1 x 6 pcs
Hardware 3 x 6 pcs
Hardware 7 x 12 pcs
ASSEMBLY INSTRUCTIONS
Page 7 of 16
Identifying Drawer's Rails (a.k.a. Runners, Glides, Slides or Guides)
An assembly of ONE drawer requires a set of 4 different rails: right panel rail, left panel rail, right
drawer rail and left drawer rail. To identify which rail belongs to which part, please read completely
first before assembling.
To Determine Right/Left Panel Rail: Place the panel rail flat on its back with the roller position on
the left hand side. If there are two holes above the roller and the other end is slightly downward angle
then it is the LEFT PANEL RAIL. If there are two holes below the roller and the other end is slightly
upward angle, then it is the RIGHT PANEL RAIL. The right and left panel rails are mirror image of
each other.If needed, label or separate each rail for easy identification.
To Determine Right/Left Drawer Rail: Place the drawer rail with the round and oval holes resting
flat on the surface with its roller on the right hand side. If the roller is facing the top, then it is the
LEFT DRAWER RAIL and if the roller is facing the bottom, then it is the RIGHT DRAWER RAIL. The
right and left drawer rails are mirror image of each other. If needed, label or separate each rail for
easy identification.
Mounting the Panel Rail: The panel rail is constructed to be mounted flat. Make sure the roller is
position on the front of the panel and the screw holes are aligned with the pre-drilled holes of the
panel.
Mounting the Drawer Rail: The drawer rail is constructed to be mounted on the side of the drawer .
Make sure the roller is position on the SIDE REAR of the drawer and the screw holes are aligned
with the pre-drilled holes on the side of the drawer.
Q
S
R7
7
X3
Dowel hole
1
1
O
N P

ASSEMBLY INSTRUCTIONS
STEP : 2
Page 8 of 16
Hardware 2 x 6 pcs
Hardware 8 x 6 pcs drawer rails
Hardware 9 x 12 pcs
Side View
Right Drawer Rail
Front View
2
22
T
T
S
S
Q
Q
Q
R
R
R
OP
8
89
9
9
9
STEP : 3
Hardware 1 x 17 pcs
Hardware 3 x 10 pcs
3
31
Dowel hole
1
1
1
1
1
1

ASSEMBLY INSTRUCTIONS
Page 9 of 16
Hardware 1 x 4 pcs
Hardware 3 x 20 pcs
Hardware 8 x 6 pcs panel rails
Hardware 9 x 12 pcs
STEP : 4
1
Dowel hole

ASSEMBLY INSTRUCTIONS
Page 10 of 16
STEP : 5
Hardware 1 x 4 pcs
Hardware 3 x 13 pcs
J
M
K
Dowel hole
STEP : 6
Hardware 3 x 2 pcs
Hardware 4 x 2 pcs
Hardware 6 x 2 pcs
4

ASSEMBLY INSTRUCTIONS
Page 11 of 16
STEP : 7
Hardware 2 x 2 pcs
Dowel hole
STEP : 8
Hardware 2 x 2 pcs
KJ
EF
D
finish

ASSEMBLY INSTRUCTIONS
Page 12 of 16
STEP : 9
Hardware 2 x 2 pcs
STEP : 10
Hardware 2 x 2 pcs
Dowel hole

ASSEMBLY INSTRUCTIONS
Page 13 of 16
STEP : 11
Hardware 2 x 2 pcs
STEP : 12
Hardware 6 x 10 pcs
6
Dowel hole

ASSEMBLY INSTRUCTIONS
Page 14 of 16
STEP : 13
Hardware 2 x 5 pcs
Hardware 3 x 4 pcs
K
V
X4
V
V
V
V
M
Dowel hole
STEP : 14
Hardware 2 x 10 pcs
F
A
U

ASSEMBLY INSTRUCTIONS
Page 15 of 16
STEP : 15
Hardware 13 x 14 pcs
N
O
P
STEP : 16
X2
Hardware 10 x 2 pcs
Hardware 11 x 2 pcs
Hardware 12 x 2 pcs
I

ASSEMBLY INSTRUCTIONS
Page 16 of 16
I
I
10
I
10
I
11
STEP : 17
STEP : 18
ASSEMBLY IS COMPLETED
Make sure the unit is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check all
bolts/screws are secured and properly
tightened.