Furniture of America CM3135SC-2PK User manual

1. Prepare 2 bolt assemblies by first inserting a lock washer (#D) onto
the bolt (#C) then insert a flat washer (#E) onto that same bolt (#C).
#2
#1
#F
#C
#D
#E
2. Align the seat cushion (#2) to
the holes along the backrest
w/legs (#1), then insert the bolt
assemblies into the center holes.
Secure using the Allen wrench.
#2
#1
#F
#E
#A
#D
1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto
the bolt (#A) then insert a flat washer (#E) onto that same bolt (#A).
2. Insert 2 bolt assemblies into each
rear corner of the seat cushion (#2),
then secure using the Allen wrench.

#3
#E
#B
#D
#F
1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto
the bolt (#B) then insert a flat washer (#E) onto that same bolt (#B).
2. Align the front legs (#3) to the holes along the front
corners of the seat cushion (#2), then insert 2 bolt
assemblies into each corner. Secure using the Allen wrench.
If wobbly, please ensure to level
the chair with the flooring, and
adjust the bolts gradually until the
chair does not wobble anymore