Furniture of America CM7548CH-CK User manual

MODEL #
CM7548CH-CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - Persons
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 8
VERSION# 19-10-17

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4/ XXXXXXX8

BED
CM7548CH-CK
#1 1pc #2 2pcs
Headboard Leg(L&R)
Headboard
5 / 8
Bed Slat
#5 4pcs #6 8pcs Ø1/4"
Support Leg
170x30x30mm
Footboard
#3 1pc
Side Rail
#4 2pcs
#A 6pcs #B 6pcs #C 6pcs
Bolt Ø5/16" x 2" Lock Washer Ø5/16" Flat Washer
Ø5/16"
#E 8pcs
Screw #8 x 30mm
#D 1pc
Allen Wrench M4

6 / 8
#4
#2L
#2R
#3
Exploded View
#1
#5
#6

1
Part #1 x1pc
Part #2 x2pcs
Hardware
#A x6pcs
Hardware
#B x6pcs
Hardware
#C x6pcs
#A
#B
#C
#D
#2R
#2L
#1
2
Part#3 x1pc
Part #4 x2pcs
ASSEMBLYINSTRUCTIONS
7 / 8
#4
#4
#3
Align HB legs (#2R/L) to the headboard
(#1), then secure by using bolts (#A)
with washers (#B,C).
Align and hook side rails (#4) to the
headboard and footboard (#3).

ASSEMBLYINSTRUCTIONS
8 / 8
#5
#6 x 4
3
Part #5 x4pcs
Part #6 x8pcs
4
Hardware
#E x8pcs
#E
#4
#4
#5
Keep this handy!
Please retain this instruction
manual and any order-related
information for future reference.
Attach support legs (#6) to the slats (#5). Adjust
leveler on the support legs according to ground
level.
Align slats (#5) to the side rails (#4), then
secure by using screws (#E).