Furniture of America CM7859Q User manual

CM7859Q

Parts List
Hardware List
#1 x 1pc
#2 x 2pcs
Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
HeadboardPanel
#3 x 1pc
#6 x 3pcs
#7 x 3pcs
#5 x 1pc
Page3 of 6
#4 x 2pcs
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Headboard Support
Support Leg
#E x 6pcs
#A x 12pcs
Bolt Ø5/16" x 1-3/4"
#B x 12pcs
#C x 12pcs
Lock Washer Ø5/16"
Flat Washer
Ø5/16"
#D x 1pc
#F x 8pcs
#G x 8pcs
#I x 1pc
Screw #4 x 1-3/16"
Allen Key 4mm
Threaded Pins Ø5/16" x 3-1/2"
Hex Nut Ø5/16"
Wrench 14mm
Ø5/16"
Parts List
Hardware List
#1 x 1pc
#2 x 2pcs
Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
HeadboardPanel
#3 x 1pc
#6 x 4pcs
#7 x 8pcs
#5 x 1pc
Page3 of 6
#4 x 2pcs
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Headboard Support
Support Leg 30x30x248mm
#E x 8pcs
#A x 12pcs
Bolt Ø5/16" x 1-3/4"
#B x 12pcs
#C x 12pcs
Lock Washer Ø5/16"
Flat Washer
Ø5/16"
#D x 1pc
#F x 8pcs
#G x 8pcs
#I x 1pc
Screw #4 x 1-3/16"
Allen Key 4mm
Threaded Pins Ø5/16" x 3-1/2"
Hex Nut Ø5/16"
Wrench 14mm
Ø1/4"
#H x 8pc
Nylon Washer
Ø5/16"
30x30x248mm
Ø5/16"

#5
#A
#C
#B
#D
#1
Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting lock washer
(#B), then flat washer (#C) onto bolts (#A). Align
headboard support (#5) to the holes of the
headboard (#1), then secure with bolts (#A).

Attach threaded pins (#F) to the holes of the headboard (#1) and footboard (#3). Align side rails (#4) to
the threaded pins (#F) that are attached to headboard (#1) and footboard (#3). Secure by using nylon
washer (#H), then hex nut (#G).
Attach support legs (#7) into each slats (#6). Adjust adjustable foot of the
support leg (#7) according to ground level.

Align slats (#6) to the side rails (#4), then
secure with screws (#E).

CM7859EK/CK

Parts List
Hardware List
#1 x 1pc
#2 x 2pcs
Before you begin, please read Page 2
of "Assembly and Care Advice".
And remember, do not tighten until
each step is completed or instructed.
HeadboardPanel
#3 x 1pc
#6 x 4pcs
#7 x 8pcs
#5 x 1pc
Page3 of 6
#4 x 2pcs
HB Leg (L&R)
Footboard
Side Rail
Bed Slat
Headboard Support
Support Leg 30x30x248mm
#E x 8pcs
#A x 12pcs
Bolt Ø5/16" x 1-3/4"
#B x 12pcs
#C x 12pcs
Lock Washer Ø5/16"
Flat Washer
Ø5/16"
#D x 1pc
#F x 8pcs
#G x 8pcs
#I x 1pc
Screw #4 x 1-3/16"
Allen Key 4mm
Threaded Pins Ø5/16" x 3-1/2"
Hex Nut Ø5/16"
Wrench 14mm
#H x 8pc
Nylon Washer
Ø5/16"
#H x 8pc
Nylon Washer
Ø5/16"

#5
#A
#C
#B
#D
#1
Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align headboard legs (#2R/L) to the holes of the headboard (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting
lock washer (#B), then flat washer
(#C) onto bolts (#A). Align
headboard support (#5) to the holes
of the headboard (#1), then secure
with bolts (#A).