Furniture of America YNJ-1661C5 User manual

E-commerce-Enitial Lab
ASSEMBLY RATING
The Assembly Rating is a 5-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being
difficult). For most products, two
persons are recommended.
EASY DIFFICULT
Page 1
ASSEMBLY INSTRUCTIONS
17.09.18
YNJ-1661C5
Tools Required for Assembly
Phillips Screwdriver
(Not Included)
2 PERSON RECOMMENDED
(Included)
Allen Wrench

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company, we will do our best to meet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
[email protected]
www.foagroup.com
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https://twitter.com/foagroup
http://www.pinterest.com/foagroup/
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
Page 2

Page 3

Unless you are particularly adept at assembling flat-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts in order of use and group the identical
hardware together to make it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use
power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
PRE-ASSEMBLY INTRODUCTION
Page 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
ly
Page 5

Please keep for future reference
MODEL # YNJ-1661C5
PARTS LIST
SHOE CABINET
ASSEMBLY INSTRUCTIONS
Page 6
HARDWARE LIST
Before you begin, please
read "Assembly and
Care Advice","Pre-
Assembly Introduction"
and "Cam Lock Fastener
Assembly Instructions"
31.5" (W) X15.75" (D) X43.82" (H)
DIMENSIONS
43.81"
D1PC
1PC
B
E1PC
1PC
G
F3PCS
I2PCS
J1PC
K1PC
L1PC
A1PC
C1PC
H1PC
113PCS 13PCS
271PC
44PCS 62SETS12PCS
5
16PCS
3
82PCS 16PCS
14
4PCS
13
2PCS
12
2PCS
11
2PCS
10
2PCS
9
15 4PCS 1PC 20
1PC
19
1PC
18
1PC
17
4PCS
16
31.5"
15.75"
0.67" 0.39"
1.97"
1.1"
0.75"
A
B
G
H
E
0.75"

ASSEMBLY INSTRUCTIONS
Page 7
STEP1
Hardware #1=13pcs
Hardware #3=16pcs
Hardware #8=2pcs
Hardware #7=1pc
Use a small dab of glue on wood
dowel hole, then insert wood
dowel (#3) to the same hole.
17
3
A
1
1
1
1
1
7
8
8
E
3
3I
3
3
1
X2
J
3
3
B
3
3
3
3
1
1
1
C
3
3
3
3
1
1
1

ASSEMBLY INSTRUCTIONS
Page 8
STEP2
STEP3
Hardware #9=2pcs
Hardware #2=3pcs
Hardware #11=2pcs
Hardware #10=2pcs
9
10
X2
Hardware #12=2pcs
Please refer to page 5 on how to
fasten cam locks.
17
31
2
2
2
2
E
JB
Hardware #6=2sets
G
11
12
6
6
H
11
12
6
6

ASSEMBLY INSTRUCTIONS
Page 9
STEP4
Hardware #2=5pcs
Hardware #4=4pcs
17
3
1
2
2
2
2
J
EB
C
C
B
Flip
180°
2
2
I
I
C
B
D
L4
4
4
4

ASSEMBLY INSTRUCTIONS
Page 10
STEP5
Hardware #2=5pcs
Hardware #13=4pcs
13
14
X4
14
14
14
D
Hardware #14=16pcs
A
B
C
J
K
2
2
22
2
1
2
17
3