Furniture of America YNJ-1977C24 User manual

EASY DIFFICULT
1 / 13
MODEL #
Questions?
GIVE US A CALL: 1-888-980-5122
MON－FRI 8:30AM－5:30PM (PST)
TOOLS REQUIRED
ASSEMBLY RATING
2 - People
Recommended
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
VERSION # 19-12-04
YNJ-1977C24
Phillips
Screwdriver
(Not Included)

2 / 13

3 / 13

4 / 13
AND MAY CAUSE SERIOUS INJURY.
ASSEMBLY
CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Position each part correctly
and insert screws or bolts into
their respective holes.
Use the appropriate hand tools
or power tools for assembly.
Select steps, such as tightening
screws and/or bolts, may require
hand tools to avoid causing
damage during assembly.
Turn clockwise to tighten and
only tighten when step is
completed or when instructed
to do so.
Save the instructions and store
any supplied tools for later
maintenance.
After two weeks, check and
tighten any loose hardware and
repeat again every six months
thereafter.

5 / 13

G1PC
F1PC
E1PC
D1PC
C1PC
B1PC
1PC
A
YNJ-1977C24
WINE RACK
PARTS
HARDWARE ACCESSORIES
6 / 13
112PCS 212PCS 44PCS
58PCS 62PCS
36PCS
1.97"
0.59"
1"
1PC
A1
2SETS
A6
1PC
A3 2PCS
A4 1PC
A5
2PCS
A2
0.47"
A
B
C
F
D
G

7 / 13
GET READY
Please group boards as below.
Body
G1PC F1PC E1PC B1PC
D1PC C1PC
1PC
A

8 / 13
1
Hardware x12PCS
1
Accessory x1PC
A1
Accessory x2PCS
A2
Hardware x3PCS
3
Accessory x1PC
A5
OPTIONAL
Apply a dab of glue
into dowel holes of
panels before
inserting dowels (#3).
3
A5
3
C
1
A
1
1
1
1
1
3
B
1
1
1
1
1
1
3
D
A1
A2
A2

9 / 13
2
Hardware x3PCS
3
Accessory x1PC
A5
OPTIONAL
Apply a dab of glue
into dowel holes of
panels before
inserting dowels (#3).
3
A5
3
3
E
F
3
G
3
Part x1PC
F
Hardware x6PCS
2
Please refer to page 5 for
detailed instructions on
how to fasten cam locks
(#2) to cam bolts (#1).
1
2
Part x1PC
E
Part x1PC
G
Part x1PC
B
Front
Top
2
2
2
22
2
B
E
F
G
Please align and secure panels in this order:#G->#F->#E

10 / 13
4
5
Part x1PC
C
Hardware x6PCS
5
Part x1PC
D
Hardware x2PCS
5
Front
Top
Front
Top
5
C
5
5
5
5
5
E
F
G
55
F
D
Rotate
90°
or
A3
Recommend using a power
tool to only tighten
hardware (#5) faster.
Accessory (#A3) could also
work for hardware (#5) if a
power tool is not present.
RECOMMEND
Accessory x1PC
A3
Accessory x1PC
A3

11 / 13
6
7
Part x1PC
A
Hardware x6PCS
2
Hardware x4PCS
4
Hardware x2PCS
6
1
2
Front
Top
Front
Top
2
2
2
A
C
D
B
2
2
2
Accessory x2SETS
A6
Accessory x1PC
A3
A3
4
6
4
X2
1) Align brackets (#6) to
the back, then secure
by using screws (#4).
A6
X2
2) The distance between the
brackets (#6) is 11.81 inches.
Please align and drill holes in
the wall that is 11.81 inches
away from each other. Attach
plastic inserts (#A6) to holes
in wall, then secure screws
(#A6) to the plastic inserts
leaving the head of the
screws popping out. Align
and hook the product to the
wall.

12 / 13
8
9
Accessory x2PCS
A4
Use the provided stickers
(#A4) to cover exposed
holes.
X2
Front
Top
C
D
Keep this handy!
Please retain this instruction
manual and any order-related
information for future reference.
Please ensure the
furniture rests on an even
and flat surface. If the
produst wobbles or feels
loose,double-check all
bolts and/or screws are
properly tightened and
secured.
ASSEMBLY
COMPLETED
Lift, dont drag!
To avoid damage to product
please always LIFT the product
when transporting of adjusting
the placement.

13 / 13