Furniture of America CM7186D User manual

1 / 7
Questions?
TOOLS REQUIRED
CM7186D
ASSEMBLY
INSTRUCTIONS
MODEL #
Allen Wrench
(Included)
Phillips
Screwdriver
(Not Included)
2 - People
Recommended
ASSEMBLY RATING
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
VERSION # 21-06-08

2 / 7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 / 7
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.

4 / 7

5 / 7
PARTS
HARDWARE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
●
●
DRESSER
CM7186D
Dresser Casegoods Leg
- Front Casegoods Leg
- Back
#1 1pc #2 2pcs #3 2pcs
LRL
R
#A #B #C
#D
8pcs 8pcs 8pcs
1pc
JCBC Bolt - M6 x 40 mm Spring Washer - M6 Flat Washer - M6
Allen Key M4 Anti-dumping Hardware Kit
1Set
#E
1pc
#4
Center Leg
29 x 29 x 101 (mm)

Align legs (#2, 3) to the dresser (#1),
then secure by using bolts (#A) with
washers (#B, C)
6 / 7
ASSEMBLY INSTRUCTIONS
ASSEMBLY
COMPLETED
Please ensure the
furniture rests on an even
and flat surface. If the
product wobbles or feels
loose, double-check all
bolts and/or screws are
properly tightened and
secured.
Keep this handy!
Lift, don't drag!
Please retain this instruction
manual and any order-related
information for future reference.
To avoid damage to product
please always LIFT the product
when transporting or adjusting
the placement.
1
2
Part
Part
Part
Part
Hardware
Hardware
Hardware
Hardware
x 1pc
x 2pcs
x 2pcs
x 8pcs
x 8pcs
x 8pcs
x 1pc
#1
#2
#3
#A
#B
#C
#D
#E
Part
Hardware
x 1pcx 1Set
#1 #E
#C
#B
#A
#D
#1
x 1pc
#4
#4
#1
#2R
#2L
#3L
#3R

7 / 7
L