Furuno FA-100 Manual

UAIS TRANSPONDER FA-100
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For
more detailed information see the Operator's Manual.
Turning on and off
·Press POWER key.
After self-test, the plotter display appears.
[- - - - - -]
SOG:
- - -.- kt
COG:
- - -.- deg
INTRD: 0
[
]: FWD
[
]: BACK
RNG: 1.50
n
m
Adjusting brilliance and contrast
1. Press CLR/ALT and SFT keys together.
BRILLIANCE
CONTRAST
ESC: [ENT]
2. Press ▲or ▼to adjust brilliance; ◄or ►to
adjust contrast.
3. Press ENT key.
Setting up for a voyage
Enter at the start of a voyage: draught,
destination, navigation, status, etc.
1. Press MENU, [5], and [1] key in that order.
+-
123
[SET SHIP DATA]
DRAUGHT: 07.5 m
DTE : KEY & DISP
2. DRAUGHT is selected; enter ship's current
draught.
3. Press ENT, and then [2] key.
[SET DESTINATION]

DATE:00/00 (DD/MM)
TIME:00:00
 DESTINATION:
NONE
4. Press NEXT to choose DATE, TIME or
DESTINATION and enter estimated date/time
of arrival or destination waypoint.
5. Press ENT, and then [3] key.
STATUS NAME
[SET STATUS]
NAV STATUS: 00
UNDER WAY USING
ENGINE (DEFAULT)
6. Press ▲, ▼, ◄or ►key to choose
appropriate navigation status.
7. Press ENT, and then [4] key.
TYPE NAME
[SET TYPE&CREW]
CREW : 0012
TYPE CLASS : A
TYPE NO. : 0
+-
8. CREW is selected; enter number of crews.
9. Press NEXT to choose TYPE NO. and press
arrow keys to choose appropriate type
number.
▲, ▼ : Increment, decrement by 1
◄, ► : Increment, decrement by 10
10. Press ENT and MENU in that order.
SAVE ?

YES
NO
 CANCEL
11. YES is selected; enter ENT.
Setting CPA/TCPA
1. Press MENU, [5], and [5] key in that order.
[SET CPA/TCPA]
CPA: 0.90 nm
TCPA: 01 min
ACTV: DSBL +-
2. Enter CPA and press NEXT.
3. Enter TCPA and press NEXT.
4. Press SFT to choose ENBL to activate the
CPA/TCPA alarm; DSBL to disable it.
5. Press ENT, MENU and ENT in that order.
Enabling/Disabling buzzer
1. Press MENU, [6] and [5] key in that order.
[SET BUZZER]
ALARM : ON
CPA/TCPA : ON
MSG ALM : ON
+-
+-
+-
2. Press SFT to choose ON or OFF for each item.
ALARM: for system trouble
CPA/TCPA: for CPA/TCPA alarm
MSG ALM: for incoming message

Displaying target data
1. Press MENU and [1] key in that order.
NAME RNG( ) BRG( ° )
FURUNO 2.9 276.1
VOYAGE  3.1 292.9
QUEST 4.3 279.5
SEADOG 15.6 82.0
INTREP 22.1 123.1
GLOBER 28.8 246.3
DTLS: [ENT] 1/ 6
n
m
2. Press ▼or ▲to choose ship's name and
press ENT.
3. Press ▼or ▲to scroll the display.
Displaying dangerous target
data
1. Press MENU and [1] key in that order.
2. Press SFT to show the dangerous ship list.
[DANGEROUS SHIPS]
NAME CPA( ) TCPA
BOUNTY 00.9 2:00
SEADOG  1.0 2:30
DTLS: [ENT] 1/ 2
n
m
3. To show a dangerous ship's details, press ▼
or ▲to choose it and press ENT.
Own ship's static information
1. Press MENU, [3], and [1] key in that order.
2. Press ▲or ▼to scroll the display.
Own ship's dynamic information
·Press MENU, [3] and [2] key in that order.
[OWN DYNAMIC DATA]
01/JAN/2002 13:24:55
LAT : 34
° 45.2132’ N
LON : 135
° 21.2345’ E
SOG : 8.321 kt
COG : 118.5 deg
ROT*: R10.3 deg/min
HDG : 120.7 deg
Sending a message
1. Press MENU, [4], [1] and [1] key in that order.
[SET MSG TYPE]
ADDRESS TYPE:
BROAD-CAST
MMSI: 000000000
MSG TYPE: NORMAL
CHANNEL#: CH-A
MMS
+-
+-
+-
2. ADDRESS TYPE is selected; press SFT to
choose address type.
3. For ADDRESS-CAST, press NEXT to choose
MMSI and enter MMSI of other party.
4. Press NEXT to choose MSG TYPE and press
SFT to choose message type.
5. Press NEXT to choose CHANNEL# and
press SFT to choose TX channel(s).
6. Press ENT and [2] key and enter message on
the SET MSG screen.
7. Press ENT to save message and press [3]
key to send message.
Receiving a message
1. When a message is received, Message
Received window appears.
2. Press MENU, [4], and [3] key in that order.
[RCVD MSG(S)] 

10/APR 05:09
 FROM: 431099806
 27/MAR 22:00
 FROM: 431099806
01/JAN 09:54
 FROM: 431099806
NEW!
S
3. Press NEXT to choose message marked with
"NEW!" and press ENT.
Displaying plotter
1. Press MENU and [2] key in that order.
2. Press [1] or [3] key to choose the range.
3. Press ◄or ►to scroll the target (target
marker in black).
4. Press SFT to display SOG/COG and
CPA/TCPA alternately.
Regional operating
· Viewing channels, TX power
1. Press MENU, [6], [2] and [1] key in that order.
[VIEW CHANNEL]
POWER : 12.5W
CHANNEL NO.
CH-A: 2087
CH-B: 2088
· Displaying, editing regional operating area status
1.
Press MENU, [6], [2] and [2] key in that order.
[CHANNEL EDIT]
SELECT NO. 1
TIME:
- -/- - - - -: - -
FROM
MMSI: DEFAULT
TYPE: DEFAULT
DTLS: [ENT]
2. SELECT NO. is selected; press ▼or ▲to
choose file no. and press ENT.
[CHANNEL EDIT]
FROM MMSI: 000000000
POWER : 12.5W
CH NO.CH-A: 0000
 CH-B: 0000
MODE CH-A: TX/RX
 CH-B: TX/RX
ZONE: 5nm
+-
+-
POWER: Press SFT to chooseTX power:12.5 W,2 W or
1W.
CH No.: Key in channel number for CH-A and CH-B.
MODE: Press SFT to assign mode for CH-A and CH-B.
ZONE: Key in zone distance
3. Press NEXT and key in lat./long. for
northeast point of regional operating area.
4. Press NEXT and key in lat./long. for
southwest point of regional operating area.
5. Press ENT twice and MENU.
PUB.NO.OSE-44170-B1
(0411,TATA) FA-100