Futech 150.12.TL User manual

1. Round vial
2. Reception eld
3. Orange LED indicator (too high)
4. Green LED indicator (center)
5. Red LED indicator (too low)
6. Center marking
7. Power On/Off button
8. Power indicator LED
9. Sound button
10. Buzzer
11. Long vial
12. Battery cover
13. Clamp
1
3
6
4 13
2
5 9
8
7
10
11
12
LINE TRACER RED/GREEN
laser receiver
HOW TO USE
Make sure your laserdevice is in laser receiver Mode. read the Manual of your
laserdevice to know how to do it.
· Open the battery cover (12) and place the battery. Pay attention to the polarity.
· Press the Power On/Off button (7) to turn on the device. The power indicator
LED (8) will light up.
· Use the soundbutton (9) to activate or de-activate the buzzer (10).
· Move with your detector to the laserline. When the laser hits the reception eld
(2), the related LED light (3, 4 or 5) and, if activated, the buzzer (10) will sound.
LOCATE HORIZONTAL LASERLINES:
· Hold the detector vertically.
· Move the detector up- or downwards while keeping the bubble in the middle
of the round vial (1).
– If the laserbeam hits the receptioneld (2) under the centermarking (6), the
upper orange LED indicator (3) will light up. (If activated, the buzzer (10)
makes a repeating sound.) Move the detector slowly downwards (in the direc-
tion of the arrow around the orange LED indicator (3)) to nd the center.
– If the laserbeam hits the receptioneld (2) above the centermarking (6), the
lower red LED indicator (5) will light up. (if activated, a te buzzer (10) makes
a fast repeating sound.) Move the detector upwards (in the direction of the
arrow around the red LED indicator (5)) to nd the center.
– If the leaserbeam hits the receptioneld (2) exactly in the center, on the cen-
termarking (6), the middle green LED indicator (4) will light up. (if activated,
the buzzer (9) makes a continious sound.) The centermarking is now exactly
alligned with the laser line. * description Made with the line tracer positioned with
the long vial on the bottoM side.

LOCATE VERTICAL LASERLINES(*):
(* NOTE: THIS DISCRIPTION IS MADE WITH THE LONG (11) VIAL ON THE BOTTOM SIDE)
· Hold the detector horizontally.
· Move the detector left or right while keeping the bubble in the middle of the
long vial (11).
– If the laserbeam hits the receptioneld (2) on the right side of the centermark-
ing (6), the left orange LED indicator (3) will light up. (If activated, the buzzer
(10) makes a repeating sound.) Move the detector slowly to the right (in the
direction of the arrow around the orange LED indicator (3)) to nd the center.
– If the laserbeam hits the receptioneld (2) on the left side of the centermark-
ing (6), the right red LED indicator (5) will light up and, if activated, a te buzzer
(10) makes a fast repeating sound. Move the detector to the left (in the direc-
tion of the arrow around the red LED indicator (5)) to nd the center.
– If the leaserbeam hits the receptioneld (2) exactly in the center, on the
centermarking (6), the middle green LED indicator (4) will light up and, if
activated, the buzzer (9) makes a continious sound. The centermarking is now
exactly alligned with the laser line.
ATTENTIONS
·this line tracer red/green is only coMpatible with red and green cross line
lasers, with a laserfrequency of 10khz in receiverModus
·this line tracer red/green is a precision instruMent. avoid storage or usage in
an environMent with high teMperature and/or high huMidity.
·please reMove the battery when you don’t use this device for a longer tiMe.
SPECIFICATIONS
Detection accurracy: < ±1mm
Max. receiving distance: 70m
Working temperature: -10°C ~+50°C
Power: DC 9V alkaline battery
Size of the receiving window: 20 x 21mm
Netto weight: 126g
Dimensions: 140 x 62 x 25mm
IP rate: IP54
Connection thread: 1/4”