6
SAFETY
Please read the safety instructions provided as
separate booklet with the device.
LASER RADIATION – Class 2 Laser product. – Do
not stare into beam
FIRST TIME USAGE
Remove all protection foils.
Place the provided LI-ION battery in the device.
Make sure the batteries are fully charged. The
four LEDs of the battery indicator light up green.
Place 2x AA Alkaline batteries in the remote
control.
BATTERY AND CHARGER
Laser:
This laser works with a 3.7V - 8000mAh LI-ION
battery. To charge this battery, you can use the
provided 12V - 3A charger for fast charging.
Remote control:
The remote control works with 2x 1.5V AA Alka-
line batteries.
AUTOMATIC FUNCTIONS
AUTO-LEVELLING
This rotation laser rst levels itself automatically
after turning on the device. After being levelled,
the laser starts spinning. The laser can level itself
within an operating angle of approx. 5°. The
auto-levelling system performs the necessary ne
adjustments, with the help of 3 electronic meas-
uring sensors, one for each axis (X, Y and Z).
TILT SECURITY
The tilt-security avoids measuring errors. By
default, the laser will be active with the tilt-se-
curity activated. After turning on the laser or
after activating the tilt-security, the tilt-security
is prepared during 60 seconds. During this time
you can install the laser in the sorrect position. 60
seconds after you hit the last button, the tilt-secu-
rity is active.
When the tilt-security sensors detect a small
shock (e.g. a vibration, a gust of wind, ...) the laser
will stop turning and starts ashing and beep-
ing. This give you the opportunity to check if the
laser is still in the correct position after the shock.
You must exit the tilt function, place the laser in
position and restart the laser to continue. A new
preparation process of approx. 60 seconds will
