FVC Low Pro Front Fairing User manual

PRODUCT
IMAGE
SP0111B
Low Pro Front Fairing
Installation Guide
FLATLINE VAN CO • [e-mail] • 888-667-5576

All Flatline Van Co products must be properly assembled and secured before attaching to your
vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily
injury or death to you or to others involved. You are responsible for assembling and securing flatline
van co products to your vehicle, checking the mounting points and attachments prior to use, and
regularly inspecting the products for wear and or damage. We always recommend you use a
professional to install any aftermarket accessories to your vehicle. If you have no mechanical
experience and are not thoroughly familiar with the installation procedures, you must have the
product installed by a professional installer or other qualified persons. The responsibility is yours
and must be taken seriously for everyone's safety.
1
FLATLINE VAN CO • [e-mail] • 888-667-5576
thanks.

2
FLATLINE VAN CO • [e-mail] • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW LOW PRO ROOF RACK AND FAIRING? HERE
ARE A FEW THINGS TO DO BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-5/32 HEX KEY ALLEN WRENCH
TOOLS
5/32 ALLEN KEY

PACKAGE CONTENTS
3
FLATLINE VAN CO • [e-mail] • 888-667-5576
FRONT FAIRING
QTY-1 T-NUT INSERT
QTY-5
1/4-20 FLANGE HEAD SCREW
QTY-4
1/4-20 BUTTON HEAD SCREW
QTY-5
1/4 SPLIT LOCK WASHER
QTY-5
STICKER PACK
QTY-1
INSTALLATION GUIDE
QTY-1

FLATLINE VAN CO • [e-mail] • 888-667-5576
LET’S GET STARTED!
1. IF YOU HAVE ALREADY INSTALLED YOUR LOW PRO ROOF RACK, REMOVE
THE FRONT CROSSBAR FROM THE RACK BEFORE BEGINNING.
2. TAKE THE FRONT FAIRING, AND ATTACH THE 1/4-20 BUTTON HEAD SCREWS,
1/4 SPLIT LOCK WASHERS, AND T NUT INSERTS AS SHOWN IN FIGURE 1
NOTE- LEAVE THE HARDWARE AS LOOSE AS POSSIBLE!
4
FIGURE 1
FIGURE 2

FLATLINE VAN CO • [e-mail] • 888-667-5576
3. NOW, SLIDE THE CROSSBAR ONTO THE FAIRING. YOU’LL HAVE
TO STRAIGHTEN EACH T NUT AS YOU GO TO GET IT TO FEED INTO THE
CROSSBAR CORRECTLY.
(SEE FIGURE 3)
5
FIGURE 3

FLATLINE VAN CO • [e-mail] • 888-667-5576
4. AFTER SLIDING THE FAIRING AND CROSSBAR TOGETHER, TIGHTEN ALL
FIVE (5) OF THE 1/4-20 BUTTON HEAD SCREWS.
5. NOW YOU’RE READY TO ATTACH THE FAIRING TO THE ROOF RACK. SLIDE IT IN
FROM THE FRONT, WITH THE FAIRING ATTACHMENT HOLES LINING UP WITH
THE FIRST SET OF MOUNT HOLES ON THE SIDE RAIL, AND THE CROSSBAR
HOLES IN THE SLOT ON THE SIDE RAIL, AND TIGHTEN DOWN USING THE
1/4-20 FLANGE HEAD SCREWS (FIGURE 4)
FRONT BACK
FIGURE 4
6

FLATLINE VAN CO • [e-mail] • 888-667-5576 7
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave
Review." Add a short review and upload a few photos to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos
with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and
outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/c/flatlinevanco
support@flatlinevanco.com