FVC 24 Inch Upper Cabinet User manual

PRODUCT
IMAGE
SP5004
24 Inch Upper Cabinet
Installation Guide
FLATLINE VAN CO • [e-mail] • 888-667-5576

All Flatline Van Co products must be properly assembled and secured before attaching to your
vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily
injury or death to you or to others involved. You are responsible for assembling and securing flatline
van co products to your vehicle, checking the mounting points and attachments prior to use, and
regularly inspecting the products for wear and or damage. We always recommend you use a
professional to install any aftermarket accessories to your vehicle. If you have no mechanical
experience and are not thoroughly familiar with the installation procedures, you must have the
product installed by a professional installer or other qualified persons. The responsibility is yours
and must be taken seriously for everyone's safety.
1
FLATLINE VAN CO • [e-mail] • 888-667-5576
thanks.

2
FLATLINE VAN CO • [e-mail] • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW CABINET? HERE ARE A FEW THINGS TO DO
BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-1/8 ALLEN KEY
-3/8 WRENCH
-15MM BOX WRENCH (IF USING L-TRACK STUDS)
-POWER DRILL/IMPACT (IF SCREWING TO DIY WALLS)
TOOLS
15MM WRENCH 1/8 ALLEN KEY
3/8 WRENCH

PACKAGE CONTENTS
3
FLATLINE VAN CO • [e-mail] • 888-667-5576
CABINET
QTY-1
ADWAG MOUNT BRACKET
QTY-2
10-32 THIN NYLOCK
QTY-4
#10 FLAT WASHER
QTY-4 10-32 FLAT HEAD SCREW
QTY-4
STICKER PACK
QTY-1
INSTALLATION GUIDE
QTY-1

FLATLINE VAN CO • [e-mail] • 888-667-5576
LET’S GET STARTED!
1. IF YOU’VE GOT AN ADVENTURE WAGON KIT INSTALLED IN YOUR VAN, YOU’LL
NEED TO INSTALL THE MOUNT BRACKETS ON THE TOP OF YOUR CABINET
USING THE SUPPLIED #10 HARDWARE (SEE FIGURE 1 & FIGURE 2)
2. NEXT STEP IS TO DECIDE ON PLACEMENT IN YOUR VAN, THIS IS ENTIRELY UP
TO YOU. ONCE YOU’VE CHOSEN A GOOD SPOT, MOVE ON TO THE NEXT STEP.
4
FIGURE 2
FIGURE 1
MOUNT BRACKETS GO HERE
#10
HARDWARE
GOES HERE

FLATLINE VAN CO • [e-mail] • 888-667-5576
3. FOR ADWAG KIT, PLACE YOUR L-TRACK STUDS IN POSITION TO RECEIVE THE
CABINET. FIGURE 3 BELOW SHOWS WHICH HOLES TO USE. IF YOU’RE
INSTALLING THE CABINET INTO YOUR OWN DIY WALL PANELS, SIMPLY SCREW
THE CABINET TO THE WALL USING ANY OF THE MANY SUPPLIED HOLES.
5
FIGURE 3
•ADWAG- VERTICAL SLOTS
•DIY- HORIZONTAL SLOTS
4. TIGHTEN DOWN THE NUTS ONTO THE L-TRACK STUDS, AND YOU’RE ALL SET.
ENJOY THE NEW STORAGE!

FLATLINE VAN CO • [e-mail] • 888-667-5576 6
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave
Review." Add a short review and upload a few photos to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos
with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and
outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/c/flatlinevanco
support@flatlinevanco.com