GALTRONICS 62-28-09 User manual

w w w . g a l tronics.com
Copyright © 2016 – Galtronics Corporation Ltd.
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
th December, 2016; Revision D
Baylin TechnOlogies Company
Model No: 62-28-09 | Mounting Bracket, Pole / Wall Installation for All Stadium Antennas
Mounting Bracket for All Stadium Antennas
Pole / Wall Mount
DESCRIPTION:
Galtronics’ mounting bracket offers an easy installation solution for mounting all Galtronics’
Stadium Antennas to either a pole or a wall. Please make sure to select appropriate
fasteners (not included) when attaching the antennas to a wall.
Galtronics Mounting Bracket for Wall Installation (Option 2)
• Mark the 2 holes on the wall as shown in Detail C.
• Drill 2 holes into the wall according to markings
• Attach the antenna pedestal to the wall
using 1/2″(12mm) bolts (not included)
Detail C
Galtronics Mounting Bracket for Pole Installation (Option 1)
• Attach the Antennas Pedestal to the pole together with the
Plate Holder and the 7/16″bolt as shown in Details A & B.
• Use the provided hardware to mount the antenna pedestal.
Detail A top view
Ø1/2″(13mm)
4.8″ (123mm)
7.9″(200mm)
9.9″ (251.3mm)
NOT PROVIDED
Ø1/2″(13mm)
ANTENNA PEDESTAL
POLE
PLATE HOLDER
NUT 7/16″
BOLT 7/16 X16″
PLAIN WASHER 7/16″
SPRING WASHER 7/16″
Detail B
PLATE HOLDER
ANTENNA PEDESTAL
BOLT 7/16″
NUT 7/16″
POLE
SPRING WASHER 7/16″
BOLT 7/16″
BOLT 3/8″
NUT 3/8″
2
5
4
3
1
21-384-03 Release Date: 29

w w w . g a l tronics.com
Copyright © 2016 – Galtronics Corporation Ltd.
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
21-384-03 Release Date: 29th December, 2016; Revision D
Baylin TechnOlogies Company
Model No: 62-28-09 | Mounting Bracket, Pole / Wall Installation for All Stadium Anntenas
Detail D
ANTENNA HORIZONTAL & VERTICAL OTIONS
SEE DETAIL B FOR ITEM NUMBERS
90 DEGREES 90 DEGREES
Horizontal Antenna Mounting Vertical Antenna Mounting
WrenchItems Description Tightening torque
9/16″(14.3mm)
5/8
″(15.9mm)
5/8″(15.9mm)
Nut 3/8″
Bolt 3/8″
Bolt 7/16″
Pole Mount Nut 7/16″
Pole Mount Bolt 7/16″
9/16″(14.3mm)
″(15.9mm)
2
3
5
1
4
88 lb* inch (10Nm)
142 lb* inch (16Nm)
310 lb* inch (35Nm)
175 lb* inch (20Nm)
175 lb* inch (20Nm)
Mounting kit is attached to antenna by
3/8" washers and nuts, which are provided
on antenna.
Tightening torque: 88 Lb*In (10Nm)
3/8" NUT
3/8" WASHER
3/8" SPRING LOCK WASHER
0 DEGREES
5/8