Galvanox PowerRail User manual
32
PLACED
POWER
PERFECTLY
ALWAYS THERE, ALWAYS RIGHT!
THE POWERRAIL BY
Setup Preparation
1. Choose a smooth even surface as mounting location for your
PowerRail.
2. Place PowerRail in selected location to ensure proper t.
3. Determine best mounting option using included adhesive or
screws.
Adhesive Installation
1. Ensure mounting surface is clean, dry and oil free
2. Remove backing from one side of adhesive strip
3. Afx adhesive strip to back of PowerRail
4. Remove adhesive strip backing from back of PowerRail
5. Place PowerRail in desired location and press into place
6. Insert included screw covers over screw openings
To remove: Use included wedge tool to separate adhesive from
mounting surface. Do not apply force to PowerRail as this may
cause damage.
Screw Installation
1. Place PowerRail in desired location
2. Mark each screw location using a thin tipped pencil or pen
3. Drill pilot holes using 1/16” drill bit and remove any debris
4. Place PowerRail in mounting location aligning with predrilled
holes
5. Using Phillips screwdriver to set screws in place ensuring
not to overtighten
6. Insert included screw covers over screw openings
Powering Up
Connect included power adapter to power source and PowerRail;
the Green-Glow Power Indicator will illuminate.
Ensure power cord is fully inserted into PowerRail for optimal
performance.
The PowerRail PR400 features a dedicated Speed Port which
delivers constant highspeed QC power; The Blue-Glow Indicator
will illuminate when in use.
4 65
Cord Organization
Keep cords organized using the included cord holders; to fasten,
remove adhesive backing from underside of cord holder and
press into place.
Power Adapter Specications
Input: 100-240V- 50/60Hz
Output PR300: 12V - 3.0A
Output PR400: 12V - 2.0A
Cord Length: 80”
PR300 Specications
Input: 12V - 2.0A (24W Max)
Shared Ports Output: 5V – 2.4A (12W Max)
Dedicated Port Output: 5V – 2.4A (12W Max)
PR400 Specications
Input: 12V - 3.0A (36W Max)
Port One & Two Shared Output: 5V – 2.4A (12W Max)
Port Three Output: QC3.0 or QC2.0 (20W Max)
Safety Information
Do not expose to excessive heat, water or moisture.
Do not drop or disassemble.
When cleaning, use a soft dry cloth,
Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives.
Operate or store in a place where temperature is between 5ºF
(-15ºC) and 131ºF (55ºC) up to 90% relative humidity.
Charging speed may vary depending on temperature conditions.
Warranty
Your new PowerRail is covered by a Limited Manufacturer’s
Warranty.
Warranty Details: for a period of one (1) year from the date
of retail purchase, Galvanox warrants that this product is free
of any defects in manufacturing, materials and workmanship.
During the warranty period, we shall, at our sole discretion,
repair or replace any defective parts within a reasonable period
of time and free of charge. Return shipping charges are excluded
from warranty coverage.
Support
As with all Galvanox products, the PowerRail is backed by our
quality assurance guarantee. If you should experience any
technical or performance issues with your device, or if you simply
have a question, we encourage you to contact us
resolve any issues.
