Gama Sonic 177B50002 User manual

US patent # 9458970 / Version 1.1
POLARIS DOUBLE HEAD
SOLAR LAMP POST
Part # 177B50002
Instruction Manual

Thank you for your purchase! GAMA SONIC® solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC® has been
recognized as a worldwide leader in the lighting industry for over 20 years.
Please read the instruction manual carefully to obtain the best results from your purchase.
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Technical Assistance / Warranty Claims / Replacement Parts
Toll-Free number: [phone] (only within the US) or www.gamasonic.com
For optimum light duration
throughout the night, it is very
important to mount your solar
lamp in a spot where it will
receive the maximum amount of
direct sunlight throughout the
day.
NOTE: For best results,
the solar light must
be charged in the
“High or Low”
position for at
least 2 days
of full direct
sunlight.
Gama Sonic’s patented Bulb technology
gives your solar lamp the look and feel
of a traditional incandescent lamp. This
helps to distribute light further than
traditional solar lamps.
Gama Sonic's Bulb Technology What’s In The Box
Solar Lamp Location
page 2
A
B
C
D
E
E
G
H
Screws &
Concrete
Anchors

1. Using the base pole (H) as a template, mark
and drill three holes into the concrete
where you want to mount your lamp.
2. Using the concrete anchors, secure the
base pole (H) to the surface.
1. Install the GS Solar LED Bulb into the Top (A).
2. Locate the operation switch on the underside of the Top (A).
3. Switch the lamp to either the Low or High setting according to your
preference:
Low = Softer light output and longer duration
High = Brighter light output
4. The lamp will operate automatically at dusk.
Assembly Instructions Operation Instructions
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: [phone]
Your Lamp can use the following bulbs:
A50WW10W – included bulb with Warm White LEDs (2700K)
A50BW10W – bulb with Bright White LEDs (6000K)
F30WW05W –Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your Lamp uses two of the following battery for each lamp head:
GS32V15
Replacement Parts
page 3
3. Attach the middle pole (G) to the base pole (H) using
the three provided screws.
4. Attach the top pole (F) to the middle pole (G) by
twisting it clockwise.
5. Attach the spacer pole (E) to the top pole (F) by
twisting clockwise.
6. Attach the finial (C) to the
centerpiece (D) by twisting
clockwise.
7. Attach the centerpiece (D) to the
spacer pole (E) by twisting
clockwise.
8. Attach the lamp head (A) to
the arm of the centerpiece
(D) by twisting clockwise.
9. Install the GS Solar LED Bulb and
switch the lamp to the Low or
High setting.
10. Install the fixture (B) to the
top (A) and secure using
the three screws.
11. Repeat steps 8-10 for the
second lamp head.
HIGH
LOW

Replacing the battery
page 4
Maintenance
Batteries are available for purchase at www.gamasonic.com
Troubleshooting
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any type of
solvent for cleaning and be careful not to put too much pressure on the solar panels while cleaning.
WARNING: Do not dispose of Li-Ion batteries in the regular trash, municipal waste stream or by re as batteries may
leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by
recycling Li-Ion batteries or disposing of them in accordance with local, State, and federal regulations. Do not mix old
and new batteries.
If your solar light does not come on as expected despite observance of all the instructions, please try the
following steps:
1. Make sure that the solar lamp is not being aected by any other light source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer when it has had a full
day in the sun rather than a day in overcast weather.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris accumulation from solar
panel(s). A solar panel free of debris will charge the batteries much more eciently.
After several years of use, the battery may need replacing.
1. Remove the top (A) from the pole by twisting it counter clockwise.
2. Remove the fixture (B) from the top (A) by removing the three screws.
3. Make sure the switch is in the “OFF” position.
4. Unscrew the battery compartment located on the silver reflector and remove the
compartment door.
5. Unclip the connector and remove the old battery.
6. Make sure the new battery is a Gama Sonic 3.2V/1,500mAh, Li-Ion Rechargeable
battery with matching connector (Item GS32V15).
7. Clip in the new battery, install it into the compartment, and secure the compartment
door with the screw.
8. Repeat steps 4-7 for the second battery.
9. Reverse steps 1-3 to install your lamp back on the post.