Gama Sonic ORION SOLAR LAMP POST User manual

US patent # 9458970 / Version 1.1
ORION SOLAR LAMP POST
Part # 123BM50001, 123BM50003
Instruction Manual

Thank you for your purchase! GAMA SONIC® solar charged lights are brighter and last
all night with a typical solar charge. Unique design, superior light output and numerous
installation options confirm the outstanding value of our product. GAMA SONIC® has been
recognized as a worldwide leader in the lighting industry for over 20 years.
Please read the instruction manual carefully to obtain the best results from your purchase.
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Technical Assistance / Warranty Claims / Replacement Parts
Toll-Free number: [phone] (only within the US) or www.gamasonic.com
For optimum light duration
throughout the night, it is very
important to mount your solar
lamp in a spot where it will
receive the maximum amount of
direct sunlight throughout the
day.
NOTE: For best results,
For best results, the
solar light must be
charged in the
“ON” (High or
Eco) position
for at least 2
days of full
direct sunlight.
Gama Sonic’s NEW Morph Solar Panel
Technology is a groundbreaking process
in the way we capture more power from
the sun. Our Morph technology still uses
monocrystalline solar panels. However,
instead of the standard limited sized
solar panels, our new technology allows
the solar panels to MORPH into the light
fixture.
New Morph Technology What’s In The Box
Solar Lamp Location
page 2
Screws &
Concrete
Anchors
A
B
C
D
E
E
G
H
Single Head
Lamp
Triple Head
Lamp

1. Using the base pole (G) as a
template, mark and drill three holes
into the concrete where you want
to mount your lamp.
2. Using the concrete anchors, secure
the base pole (G) to the surface.
1. Install the GS Solar LED Bulb into the Top (A).
2. Locate the operation switch on the underside of the Top (A).
3. Switch the lamp to either the Eco or High setting according to your
preference:
Eco = Softer light output and longer duration
High = Brighter light output
4. The lamp will operate automatically at dusk.
Assembly Instructions Operation Instructions
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: [phone]
Your Lamp can use the following bulbs:
A50WW10W – included bulb with Warm White LEDs (2700K)
A50BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White LEDs (2700k)
Your Lamp uses two of the following battery:
GS32V15
Replacement Parts
page 3
3. Attach the middle pole (F) to the base
pole (G) using the three provided screws.
4. Attach the top pole (E) to the middle pole
(F) by twisting it clockwise.
5. Attach the spacer pole (D) to the top pole
(E) by twisting clockwise.
6. Attach the centerpiece
(B or C) to the spacer
pole (D) by twisting
clockwise.
7. Attach the lamp head (A) to
the arm of the centerpiece
(B or C) by twisting
clockwise.
8. Install the GS Solar LED
Bulb and switch the
lamp to the Eco or High
setting.
9. Install the lens (H) onto
the lamp head (A) by
twisting clockwise.
Note: Make sure the lens is
fastened securely.
10. Repeat steps 7-9 two
more times if installing
the triple head lamp
(Item 123BM50003).
HIGHECO

Replacing the battery
page 4
Maintenance
Batteries are available for purchase at www.gamasonic.com
Troubleshooting
Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not use any type of
solvent for cleaning and be careful not to put too much pressure on the solar panels while cleaning.
WARNING: Do not dispose of Li-Ion batteries in the regular trash, municipal waste stream or by re as batteries may
leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by
recycling Li-Ion batteries or disposing of them in accordance with local, State, and federal regulations. Do not mix old
and new batteries.
If your solar light does not come on as expected despite observance of all the instructions, please try the
following steps:
1. Make sure that the solar lamp is not being aected by any other light source.
2. Ensure the solar lamp is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will last longer when it has had a full
day in the sun rather than a day in overcast weather.
WARNING: Please keep out of reach of children. Do not dispose of the Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate
batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in
accordance with local, State and federal regulations. Do not mix old and new batteries.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris accumulation from solar
panel(s). A solar panel free of debris will charge the batteries much more eciently.
After several years of use, the battery may need replacing.
1. Remove lamp head from the pole.
2. Remove the lens (H) by twisting counterclockwise.
3. Make sure the Eco/Off/High switch is in the OFF (O) position.
4. Unscrew the battery compartment located on the silver reflector and remove the
compartment door.
5. Unclip the connector and remove the old battery.
6. Make sure the new battery is a Gama Sonic – 3.2V/1,500mAh, Li-ion Rechargeable
Battery with a connector (Item GS32V15).
7. Clip on the new battery and install it into the battery compartment. Re-Install the
battery compartment door.
8. Repeat steps 4 to 7 for the second battery.
9. Reassemble the lamp by reversing steps 1-3.