Ganz ZC-PT series User manual

EnglishVersion 1.1

User sManual
1
Preface
The information provided inthismanualwascurrentwhenpublished.Thecompanyreservesthe
right toreviseandimproveitsproducts.All specificationsaresubject tochangewithoutnotice.
Notice
ToworkwiththePTZ Cameras,anyinstallerortechnician musthavethe following
minimumqualifications:
•AbasicknowledgeofCCTVsystemsandcomponents
•Abasicknowledge ofelectricalwiring and low-voltageelectricalconnections
•Thoroughfamiliaritywiththecontentsofthismanual
ImportantInformation
Beforeproceeding,pleaseread and observeallinstructionsand warningsinthis
manual.Retainthismanualwiththe originalbill ofsaleforfuturereferenceand,if
necessary,warrantyservice.Whenunpackingyourunit, check formissing or
damageditems.Ifanyitemismissing,orifdamageisevident, DONOTINSTALLOR
OPERATETHISPRODUCT. Contactyourdealerforassistance.
Copyright
Undercopyrightlaws,thecontentsofthisusermanualmaynotbecopied,
photocopied,translated,reproduced orreplicated inanyelectronicmediumor
machine-readableformat, inwholeorinpart, withoutthepriorwrittenpermissionof
CBCCo.Ltd.
©Copyright2006CBCCo.Ltd.
Regulation
ThisdevicecomplieswithPart15ofthe FCC Rules.Operationissubjecttothe
followingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustaccept
anyinterferencereceived,includinginterferencethatmaycauseundesired
operation.

User sManual
2
Disposalof youroldappliance
1.When thiscrossed-outwheeledbinsymbolisattachedtoaproductitmeansthe
product iscoveredbytheEuropeanDirective2002/96/EC.
2. All electricaland electronicproductsshouldbedisposedofseparatelyfromthe
municipalwastestreamviadesignatedcollection facilitiesappointedbythe
governmentorthe localauthorities.
3. Thecorrectdisposalofyouroldappliancewill helppreventpotentialnegative
consequencesfortheenvironmentandhumanhealth.
4. Formoredetailedinformationaboutdisposalofyouroldappliance,please
contact yourcityoffice, wastedisposalserviceorthe shopwhereyoupurchased
theproduct

User sManual
3
Warning Notices
•Handlethecamerawithcare
Donotabusethe camera.Avoidstriking,shaking, etc. The cameracouldbe
damagedbyimproperhandingorstorage.
•Donotdismantlethecamera
Topreventelectricshock,donotremovescrewsorcovers.Therearenouser
serviceablepartsinside. Contact aqualified servicepersonforservicing.
•Donotblock cooling holeson thebracket
Thiscamerahasacooling faninside.Blockingthecooling holesleadstoa
buildupof heat inside thecameraandmaycausemalfunctions.
•Donotoperatethecameraoutsidethespecifiedtemperature, humidity
orpowersourcerating range
Usetheindoorcameraunderconditionswherethetemperatureisbetween0~
40°C(32 ~104°F)andtheoutdoorcameraat-50~50°C(-58 ~122°F)and in
humidityof below90%.
•Donotusestrong orabrasivedetergentswhencleaning thecamera
body
Useadryclothtoclean the camerawhen dirty.Ifthe dirtishardtoremove,
useamilddetergentandwipegently.
•Neverpointthecameratowardsthesun
Donot aimthecameraat bright objects.Whetherthecameraisinuseornot,
neveraimitatthe sunorotherextremelybrightobjects.Otherwise,the
cameramaybe smeared ordamaged.

User sManual
4
Contents
1. Overview..................................................................................................................................6
1.1 Product Features...........................................................................................................7
1.2 ProductApplication........................................................................................................8
2. Connecting thePTZCamera..................................................................................................9
2.1 PackageContent...........................................................................................................9
2.2 SwitchDefinition..........................................................................................................10
2.3 CommunicationSwitchSetting....................................................................................10
2.4 PTZ CameraIDSetting...............................................................................................11
2.5 PTZ CameraControlProtocol.....................................................................................11
2.6 22-PinConnectorDefinition.........................................................................................13
2.7 RS-485Connector.......................................................................................................14
3. Operation and Configuration...............................................................................................15
3.1 OSDDisplayFormat....................................................................................................15
3.2 OSDMenu Tree..........................................................................................................16
3.2.1 18×/26×Model...............................................................................................16
3.2.2 22×/23×/35×Model........................................................................................18
3.3 ConfigurationMenu.....................................................................................................21
3.3.1 LANGUAGE...................................................................................................21
3.3.2 DEFAULTCAMERA.......................................................................................21
3.3.3 BACKLIGHT..................................................................................................22
3.3.4 FOCUS..........................................................................................................23
3.3.5 AE MODE......................................................................................................24
3.3.6 WBCMODE...................................................................................................26
3.3.7 SETUPMENU 1............................................................................................28
ZOOMSPEED.......................................................................................28
DIGITALZOOM......................................................................................28
SLOWSHUTTER...................................................................................29
IMAGEINVERSE...................................................................................29
APERTURE............................................................................................30
STABILIZER(35×ModelOnly)...............................................................30
EXIT.......................................................................................................30
3.3.8 SETUPMENU 2............................................................................................31
FLIP.......................................................................................................31
ANGLEADJUSTER...............................................................................32
SPEEDBYZOOM..................................................................................32
AUTO CALI. (AutoCalibration)...............................................................32
SYSTEMRESET...................................................................................32
EXIT.......................................................................................................32
3.3.9 IDDISPLAY...................................................................................................33

User sManual
5
3.3.10 TITLEDISPLAY.............................................................................................33
3.3.11 TITLESETTING.............................................................................................33
3.3.12 PRESET........................................................................................................34
3.3.13 SEQUENCE...................................................................................................35
3.3.14 AUTOPAN......................................................................................................37
3.3.15 CRUISE.........................................................................................................38
3.3.16 HOMESETTING............................................................................................39
3.3.17 IRFUNCTION(RemovableIRBlocking)........................................................41
3.3.18 ALARMSETTING..........................................................................................42
3.3.19 ALARMDETECT(18×/26×Model)................................................................45
3.3.20 WDRFUNCTION(23×/23×Model)................................................................46
3.3.21 PRIVACYMASK............................................................................................47
3.3.22 TIMESETTING..............................................................................................51
3.3.23 SCHEDULE...................................................................................................52
3.3.24 EXITOSD......................................................................................................54
AppendixA:TechnicalSpecifications.......................................................................................55
OSDMenu Notes.........................................................................................................................57
<18×/26×Model>........................................................................................................57
<22×/23×/35×Model>.................................................................................................60

User sManual
6
1.Overview
The ZC-PTseriesintegrated indoorPTZ Cameraisanewsub-compactmodel
designedtodeliversuperbperformanceanddurabilitycombinedwithanintelligent
andstylishhousingthatissuitableforanysecurityandsurveillanceinstallation. The
ZC-PT-XTseriesisanewweatherresistantintegrated outdoorPTZ Camera.The
ZC-PTand ZC-PT-XTseriessupportastandardwiring concept foreasy installation,
andcanbe integratedwithCCTVproducts,suchasDVRs,controlkeyboardsand
CCTVaccessoriestoprovideatotalsurveillancesolution.
ThePTZCamerarangeincludesfourmodelsofnewgenerationadvancedDSP
colourcameras:
ZC-PT235Model:35×opticalzoom/12×digitalmagnification
ZC-PT226model:26×opticalzoom/12×digitalmagnification
ZC-PT223model:23×opticalzoom/12×digitalmagnification
ZC-PT222model:22×opticalzoom/12×digitalmagnification
ZC-PT218model:18×opticalzoom/12×digitalmagnification
The PTZ Cameradeliversupto420xzoomratio,enablingittocaptureclearimages
fromalongdistanceaway.Continuousautofocus,back lightcompensation,auto
exposure,and digitalslowshutterfunctionsensureclearand high qualityimages.
ThekeyfeaturesincorporatedtomeetyourneedsincludearemovableIRblocking
filterto24-houroperation,additionalprivacy masksspeciallydesigned topreventany
intrusivemonitoringinspecificareas,and Wide DynamicRangefunction.TheHome
function allowsthe usertospecifyapresetposition asthe ‘homeposition oradefault
function(sequence/auto-pan/cruise)as ‘homefunction.The PTZ Camerawill
automaticallyreturntoitshomepositionorfunctionwhenthe userdoesnotoperate
anyofthecontrolsforasetperiodoftime.Theuniqueschedulingfunction also
enablesuserstoprogramapresetpointorfunction(sequence/auto-pan/cruise),
whichisautomaticallytriggeredatacertaintime.
The PTZ Cameraprovidesvariablepan/tilt speedsranging fromafast patrolof400°
persecondtoaslowsweepof5°persecondwith0.225°panaccuracyforfastand
accuratetrackingcapability.The 360°continuousrotation and-10°~190°tilttravel
capabilitiesallowan objectpassing directlyunderneaththePTZ Cameratobe
tracked.Upto256 presetpointscanbe programmed forimmediatesurveillanceof
targetareas,and youcanalsodefine8sequence,4auto-pan and1cruiseroutefor
the cameratooperateautomatically.AnRS-485 communicationportisavailablefor
remotecontrolpurposes.

User sManual
7
The PTZ Cameraprovides8alarm inputsand 2alarm outputs, and the smartalarm
managementmechanismcanbeprogrammedusing theOSDsetup menu;certain
functions(Preset/Sequence/Auto-Pan/Cruise)canbe activatedwhen an alarm is
triggered.
Variousbuilt-inprotocolsincluding Ganz-PT,Ganz-S,Pelco,VCL,Philips,AD-422
(Manchester) etc., provideconnectivitytoothersurveillancesystems,allowingthe
integrated PTZ Cameratobe usedinconjunctionwithsystemsfromother
manufacturers.
Dependabilityandultrahighreliabilityarekeyfactorsofthecameradesign.Every
PTZ CameraisassembledwithmeticulouscareandthoroughtestingatourISO9001
certifiedfactory.High performance,reliability,and reasonablepricingmakethis
cameraanidealsolutionforeventhetoughest surveillancerequirements.
1.1 ProductFeatures
Preciseand AccuratePTZCameraPerformance
•Autocalibration
•Homefunction
•Schedulingfunction
•Pandriveraccuracy of0.225°
•Preset speedupto400°/sec.
•Pan&tilt speed proportionaltozoomratio
•256presetpositions/8sequences/4auto-pan /1cruise
SuperiorCameraImageQuality
•Minimumillumination 0.01Lux
•Digitalslowshutter
•Electronicshutter
•Widedynamicrange(23×and35×models)
•AutoWhiteBalance
•Backlight Compensation
•Image Inverse
•Image Stabilizer
•Upto24maskingzones
•RemovableIRblockingfilter(18×,23×,26×and 35×models)
AdvancedPTZCameraFunctions
•DigitalImage Flip
•Easy FWupgradeviaISP
DynamicPTZCameraApplications
•Multi-languageOSD

User sManual
8
•MultipleBuilt-inprotocols
•8alarm inputs,1alarm output
•Flexibleindoorandoutdoormountings
•Compactlightweightdesignforeasyinstallation
•Weatherresistanthousing toprotectagainst temperature, sunlightand rain
1.2 Product Application
ConnectthePTZ Cameratootherdevicesasshowninthediagramtocreatea
completevideosurveillancesolution.
NOTE: Toextend thenetworkdistanceupto1.2km(4000 feet)andto
protectthe connecteddevices,itishighlyrecommendedtoplacearepeater
atthemid-point. However,arepeatermaybeneeded inthe networkdistanceless
than1.2kmiftheusedcablesarenotthe CAT524-gaugecables(see2.7RS-485
Connector). Refertotherepeaterusermanualfordetailed information.

User sManual
9
2. ConnectingthePTZCamera
Pleaserefertothe sectionsbelowfordetailsofhowtosetandconnectthePTZ
Camera.InordertocontrolPTZCamera,acontrolkeyboardoralternativecontrol
deviceisrequired.
2.1 PackageContent
Beforeproceeding,pleasecheck thattheboxcontainstheitemslisted here.Ifany
itemismissing orhasdefects,DONOTinstalloroperatetheproductandcontact
yourdealerimmediatelyforassistance.
IndoorPTZCameraStandardPackage
CameraBody
HardCeilingMountand
DecorationRing
5.4”OpticalCover
User sManual&
Quick Guide
CD Fixing Plate 60-cmcableforPower,Video,
RS-485andAlarm
OutdoorPTZCameraStandardPackage
CameraBody&
VandalProof Cover
60-cmcableforPower,
Video, RS-485andAlarm
User sManual&
Quick Guide
Lubricant Water-proofrubber Screws Securityscrewset

User sManual
10
2.2 SwitchDefinition
The PTZ CameraIDandcommunication protocolmustbe configured before
connecting the cameratootherdevices.The switchesusedtoconfigurethese
settingsarelocatedonthebottomof thePTZ Camera.
IndoorPTZCamera OutdoorPTZ Camera
A Reserved
B Communicationswitch
C PTZ CameraIDswitch
D PTZ CameraControlProtocol
E RJ-45 connector(forIPcameraonly)
F 22-pinconnector
G ISPconnector(forFWupgrade)
2.3 CommunicationSwitchSetting
The tablebelowshowsthe functionofeachpinwithinthecommunicationswitch.
Communication switch SW1
SW2 RS-485setting
SW3 Termination
SW4 Linelock
SW5 Systeminitialization
SW6 Reserved
RS-485istheinterfacethatallowsthePTZ Cameratocommunicatewithitscontrol
unit;theRS-485configurationonthePTZ Cameraandthecontrolunitmusttherefore

User sManual
11
be the same.The defaultRS-485 settingishalf-duplex.Pleasedonotchangethe
defaultsetting withoutseekingtheadviceofaqualifiedspecialistorthe supplier.The
SW3andSW4areusedforterminationandlinelock adjustmentrespectively.The
SW5ismainlyusedwhenuserswanttorestorethecameratothefactorydefault
status;moreover, oncefirmwareupgradeiscarriedout, usersalsoneedtoresetthe
SW5afterward.
RS-485setting
Half-duplex Full-duplex
2.4 PTZ CameraIDSetting
UsetheswitchtochangeyourPTZCameraIDbyturningthearrowtothedesired
number. Forexample,ifthe cameraIDis123,theIDswitchshouldbesetasbelow.
NOTE: NotwocamerasshouldbegiventhesameID,orcommunication
conflictmayoccur.
HundredsTensUnits
NOTE: Thenumber “0”shouldbelocatedatthetopasshowninthediagram
abovetoensurecorrect switchdefinition.
2.5 PTZ CameraControl Protocol
Aprotocolisaspecificsetofrulesand proceduresusedfordatacommunication.
Definetheprotocolyou aregoingtousebasedonthedevicesinyoursurveillance
system.Generally, you shoulduseasingleprotocoleven ifthedevicesaresupplied
bydifferentmanufacturers.Usethe switchtoset yourPTZ Cameracontrolprotocol
andthebaudrate.Refertothe tablebelowand turnthearrowtochooseaprotocolfor
yourcamera.

User sManual
12
Switchno. Protocol Baud rate
00 VCL 9600
01 PelcoD 2400
02 PelcoP 4800
04 Chiper 9600
05 Philips 9600
07 GANZ-PT 9600
08 AD422 4800
09 DMP 9600
11 PelcoD 4800
12 PelcoD 9600
13 PelcoP 2400
14 PelcoP 9600
15 JVC 9600
16 GANZ-S 4800
17 GANZ-S 9600
18 GANZ-S 19200
19 GANZ-S 38400
21 KALATELRS485 9600
22 KALATELRS422 4800
*GANZ-PT isforZC-PTseriesPTZCamera.GANZ-SisforZC-SseriesPTZCamera.
Forexample,select protocolPelcoDwithabaudrateof2400, theIDswitchshould
be setasshownbelow.
TensUnits
NOTE: ChangethePTZ Camerascontrolprotocolonlywhenthe camerais
powered off.
Afterchanging protocol, pleasedo thefollowingprocedure:
(1)SetSW5(Communication switch)on.
(2)Poweronthe cameraandcheck themessageon thescreen.
(3)Poweroff andsetSW5(Communication switch)off.

User sManual
13
(4)Poweronagain.
2.6 22-PinConnectorDefinition
A50-cmdatacable(asshownbelow)issuppliedwiththe PTZ Cameraforquick
installation,e.g.fordemonstration ortestingpurposes.
The 22-pinconnectordefinitionislisted inthetablebelow.
Pin Definition Cable
1 AC24-1 20AWG
2 ALMNC 24AWG
3 AC24-2 20AWG
4 ALMNO 24AWG
5 FG 20AWG
6 ALMCOM 24AWG
7 T+
8 R-
9 T-
10 R+
11 Alarm ISOG
12 ALM-1
13 ALM-3
14 ALM-2
15 ALM-4
16 ALM-5
17 ALM-6
18 ALM-7
19 ALM-8
20 ALMGND
21 VGND
22 Video
24AWG

User sManual
14
2.7 RS-485Connector
RS-485istheinterfacethatthe PTZ Camerausestocommunicatewithitscontrol
unit.Connectthecontrolkeyboardtothe cameraviatheterminalblock.The
recommendedcablesforRS-485communicationare CAT5 cables;themaximum
cablelengthforwirewithagaugeabove24 is4000feet(1219 meters).Ifthetotal
cablelengthexceeds4000 feet, usingarepeatertoamplifythesignalsis
recommended.
Pin Corresponding Pins
(22-PinConnector) Definition
1 7,10 T+, R+ (D+)
2 Reserved
3 Reserved
4 Reservied
5 8,9 T-, R-(D-)

User sManual
15
3. OperationandConfiguration
3.1 OSDDisplayFormat
The information shownonthescreen isdescribedintermsofthecorresponding OSD
display, itspositionand itsfunctioninthetablebelow.
123
4
5
6
Position Function OSDdisplay Description
A Autofocusmode
1 Focusmodes MManualfocusmode
X Back lightcompensationOFF
2 Backlight B Back lightcompensationON
3 Alarm ALARM Alarm message
4 Zoomratio ×1 Currentzoomratio
(OpticalzoomàDigitalzoom)
5 Title •Maximum20 charactersforeachtitle.
•16 setsof titlesareavailable.
6 CameraID Showsthe cameraID

User sManual
16
3.2 OSDMenuTree
The OSDsetupmenu structuresforthe18×/26×modelandthe 22×/23×/35×model
arelistedseparatelyinthesection below.The starsymbolindicatesthefactory
default.
Foradetailedfunctiondescription,pleaserefertosection3.3Configuration Menu.
3.2.1 18 /26 Model
Item Layer 1 Layer 2 Layer 3 Default
LANGUAGE <ENGLISH>,<FRENCH>, <GERMAN>,<ITALIAN>,<JAPANESE>,
<POLISH>,<PORTUGUESE>,<RUSSIAN>,<SPANISH> ENGLISH
DEFAULT
CAMERA <ON>,<OFF> ON
BACKLIGHT <ON>,<OFF> OFF
AUTO AF MODE<NORMAL>,<INTERVAL>, <ZOOM
TRIG> NORMAL
FOCUS MANUAL FOCUSSPEED<01>~<08>
EXPODURECOMP. <OFF>,EXPOSUREVALUE:
<-10.5dB>~<10.5dB> OFF
AUTO
BRIGHTBRIGHTVALUE
<00>~<31>
SHUTTERSHUTTERSPEED
<1>~<1/10000>SEC.
IRIS IRIS<CLOSE>,<F1.6>
~<F28>
BRIGHTVALUE:AUTO
SHUTTERSPEED
<1/10000>~<1>
IRISVALUE
<F1.6>~<F28>
AE MODE
MANUAL
GAINVALUE
<-3>dB~<28>dB
AEMODE
EXIT YES
AUTO(AutoWhiteBalance)
INDOOR
OUTDOOR
ATW(Auto-tracing WBC)
RGAIN<000>~<127>
WBC MODE
MANUAL BGAIN<000>~<127>
ZOOMSPEED <1>~<8> 8
DIGITALZOOM <ON>,<OFF> ON
SLOWSHUTTER <ON>,<OFF> OFF
IMAGEINVERSE <ON>,<OFF> OFF
APERTURE <01>~<16> 11
SETUPMENU 1
EXIT YES
FLIP <OFF>, <M.E.>,<IMAGE> OFF
MINANGLE<-10 ~+10 DEG>,0
ANGLEADJUSTER MAXANGLE<080 ~100 DEG> 90
SPEEDBYZOOM <ON>,<OFF> OFF
AUTO CALI. <ON>,<OFF> OFF
SYSTEMRESET YES
SETUPMENU 2
EXIT YES
IDDISPLAY <ON>,<OFF> ON
TITLEDISPLAY <ON>,<OFF> OFF
TITLESETTING <01>~<16> 01
PRESET PRESET SET <001>~<256> ENTER

User sManual
17
Item Layer 1 Layer 2 Layer 3 Default
PRESETRUN <001>~<256> ENTER
EXIT YES ENTER
SEQUENCELINE <1>~<8> 1
SEQUENCEPOINT <01>~<32> 01
PRESET POS. <001>~<255>,<END> 001
SPEED <01>~<15> 01
DWELLTIME <000>~<127>SEC. 000
RUN SEQUENCE ENTER
SEQUENCE
EXIT YES
AUTOPANLINE <1>~<4> 1
START POINT <TOFIND>,<TOSAVE>
END POINT <TOFIND>,<TOSAVE>
DIRECTION <RIGHT>,<LEFT> RIGHT
SPEED <01>~<04> 01
RUN AUTOPAN ENTER
AUTOPAN
EXIT YES
RECORD START ENTER
RECORD END ENTER
RUN CRUISE ENTER
CRUISE
EXIT YES
HOME FUNCTION <ON>,<OFF> OFF
SELECTMODE <PRESET>,<SEQUENCE>, <AUTOPAN>,
<CRUISE> PRESET
<001>~<256> 001
<1>~<8> 1
<1>~<4> 1
PRESET POINT
SEQUENCELINE
AUTOPANLINE
CRUISE LINE <1> 1
RETURN TIME <1>~<128>MIN. 000
GO ENTER
HOME SETTING
EXIT YES
<AUTO>,
IRFUNCTION <MANUAL> IRMANUAL:<ON>,<OFF> AUTO
ALARMPIN <1>~<8> 1
ALARMSWITCH <ON>,<OFF> OFF
ALARMTYPE <N.O.>(NormalOpen),<N.C.>(NormalClose)
N.C.
ALARMACTION <PRESET>,<SEQUENCE>, <AUTOPAN>,
<CRUISE> PRESET
<001>~<256> 001
<1>~<8> 1
<1>~<4> 1
PRESET POINT
SEQUENCELINE
AUTOPANLINE
CRUISE LINE 1 1
DWELLTIME <001>~<127>Sec.,<ALWAYS> ALWAYS
ALARM
SETTNG
EXIT YES
DETECTSWITCH <ON>,<OFF> OFF
DETECTMODE <INTFOCUS>,<FIXFOCUS>,<INTAE>,
<FIXAE> INT FOCUS
ALARMDETECT
EXIT YES
PRIVACYSWITCH <ON>,<OFF> OFF
TRANSPARENCY <ON>,<OFF> OFF
COLOR <BLACK>,<LI. GRAY>, <GRAY>,<WHITE>, <RED>,<GREEN>,<BLUE>,<CYAN>,
<YELLOW>,<MAGENTA> BLACK
HCENTER:L/R
VCENTER: D/U
HSIZE<000>~<080>
VSIZE<000>~<060>
SETMASK <01>~<24>
EXIT+SAVE
CLEARMASK <01>~<24>
PRIVACYMASK
EXIT YES
TIMESETTING TIMEDISPLAY <ON>,<OFF>

User sManual
18
Item Layer 1 Layer 2 Layer 3 Default
SET YEAR <00>~<99>
SETMONTH <01>~<12>
SETDAY <00>~<31>
SETHOUR <00>~<23>
SETMINUTE <00>~<59>
EXIT+SAVE
SCHEDULESWITCH <ON>,<OFF>
SCHEDULEPOINT <01>~<32> 01
SCHEDULEHOUR <00>~<23> 00
SCHEDULEMINUTE <00>~<59> 00
NONE NO FUNCTION
PRESET PRESET POINT
<001>~<256>
SEQUENCE SEQUENCELINE
<1>~<8>
AUTOPAN AUTOPANLINE
<1>~<4>
CRUISE CRUISE LINE<1>
SCHEDULEMODE
IRFUNC. IRFUNCTIONAUTO
SCHEDULERESET YES
SCHEDULE
SCHEDULEEXIT YES
EXIT OSD YES
3.2.2 22 /23 /35 Model
Item Layer 1 Layer 2 Layer 3 Default
LANGUAGE <ENGLISH>,<FRENCH>, <GERMAN>,<ITALIAN>,<JAPANESE>,
<POLISH>,<PORTUGUESE>,<RUSSIAN>,<SPANISH> ENGLISH
DEFAULT
CAMERA <ON>,<OFF> ON
<ON> BLC LEVEL<00>~<30>
BACKLIGHT <OFF> OFF
AUTO TUNINGVALUE<1.5M>(35×model only),
<1M>,<30CM>,<10CM>,<1CM> 10CM
FOCUS MANUAL FOCUSSPEED<0>~<3>
AUTO IRISOFFSET <00>~<15>
SHUTTER SHUTTERSPEED
23×/35×Model: <1/30000>~<1/2>
22×Model:<1/30000>~<1/50>(PAL);
<1/30000>~<1/60>(NTSC)
IRIS <00>~<09>
AEMODE
AGC <00>~<05>
AUTO(AutoWhiteBalance)
WBC MODE MANUAL RGAIN<00>~<99>
BGAIN<00>~<99>
ZOOMSPEED <FAST>,<SLOW> FAST
DIGITALZOOM <OFF>, <02>~<12> OFF
<1/2>~<1/60>(NTSC) 1/30SLOWSHUTTER
(23×/35×Model) <1/1.5>~<1/50>(PAL) 1/25
IMAGEINVERSE <ON>,<OFF> OFF
<AUTO>
APERTURE <MANUAL> HAPERTURE
<00>~<31>
VAPERTURE
<00>~<31>
STABILIZER
(35×model only) <OFF>, <10Hz>, <5Hz>
SETUPMENU 1
EXIT YES
FLIP <OFF>, <M.E.>,<IMAGE>(23×/35×Model) OFF
SETUPMENU 2 ANGLEADJUSTER MINANGLE<-10 ~+10 DEG>,0

User sManual
19
Item Layer 1 Layer 2 Layer 3 Default
MAXANGLE<080 ~100 DEG> 90
SPEEDBYZOOM <ON>,<OFF> OFF
AUTO CALI. <ON>,<OFF> OFF
SYSTEMRESET YES
EXIT YES
IDDISPLAY <ON>,<OFF> ON
TITLEDISPLAY <ON>,<OFF> OFF
TITLESETTING <01>~<16> 01
PRESET SET <001>~<256> ENTER
PRESETRUN <001>~<256> ENTER
PRESET EXIT YES ENTER
SEQUENCELINE <1>~<8> 1
SEQUENCEPOINT <01>~<32> 01
PRESET POS. <001>~<255>,<END> 001
SPEED <01>~<15> 01
DWELLTIME <000>~<127>SEC. 000
RUN SEQUENCE ENTER
SEQUENCE
EXIT YES
AUTOPANLINE <1>~<4> 1
START POINT <TOFIND>,<TOSAVE>
END POINT <TOFIND>,<TOSAVE>
DIRECTION <RIGHT>,<LEFT> RIGHT
SPEED <01>~<04> 01
RUN AUTOPAN ENTER
AUTOPAN
EXIT YES
RECORD START ENTER
RECORD END ENTER
RUN CRUISE ENTER
CRUISE
EXIT YES
HOME FUNCTION <ON>,<OFF> OFF
SELECTMODE <PRESET>,<SEQUENCE>, <AUTOPAN>,
<CRUISE> PRESET
<001>~<256> 001
<1>~<8> 1
<1>~<4> 1
PRESET POINT
SEQUENCELINE
AUTOPANLINE
CRUISE LINE <1> 1
RETURN TIME <1>~<128>MIN. 000
GO ENTER
HOME SETTING
EXIT YES
IRFUNCTION
(23×/35×Model) <AUTO>,<ON> THREADHOLD <MID>,<HI>,<LOW>
IRCOLOR<B/W>,<COLOR>
EXIT<YES> AUTO
ALARMPIN <1>~<8> 1
ALARMSWITCH <ON>,<OFF> OFF
ALARMTYPE <N.O.>(NormalOpen),<N.C.>(NormalClose)
N.C.
ALARMACTION <PRESET>,<SEQUENCE>, <AUTOPAN>,
<CRUISE> PRESET
<001>~<256> 001
<1>~<8> 1
<1>~<4> 1
PRESET POINT
SEQUENCELINE
AUTOPANLINE
CRUISE LINE 1 1
DWELLTIME <001>~<127>Sec.,<ALWAYS> ALWAYS
ALARM
SETTNG
EXIT YES
<ON>
RATIO LEVEL<000>~<128>
SHUTTERSPEED<000>~<128>
IRISOFFSET <000>~<128>
EXIT<YES>
<AUTO>
WDR FUNCTION
(23×/35×Model)
<OFF>