Garden Treasures SS-909E-1N User manual

ITEM #0206016
2 PERSON
STEEL SLING SWING
MODEL #SS-909E-1N
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number _________________________ Purchase Date _______________________
Français p. 10
Español p. 19
1

PACKAGE CONTENTS
E
F
I
PART DESCRIPTION QUANTITY
A
B
C
D
E
F
G
Top Frame Bar
Front Leg
Back Leg
Back Crossbar
Leg Crossbar
Right Arm
Left Arm
1
1
1
1
2
2
2
K
J
C
G
D
H
N
E
L
B
F
I
A
M
PART DESCRIPTION QUANTITY
H
I
J
K
L
M
N
Sling Seat
Sling Back
Canopy Side Bar
Canopy
Short Hanging Bar
Long Hanging Bar
Magazine Bag
1
1
1
2
2
2
2
2

HARDWARE CONTENTS (shown actual size)
AA
M6 X 40 L
Bolt M6 X 45 L
Bolt M6 X 55 L
Bolt
M6 X 70 L
Bolt
M8 X 45 L
Bolt
M8 X 95 L
Bolt
M8 Nut
M6 Nut
Qty. 4 Qty. 4
Qty. 4
Qty. 4
Qty. 4
Qty. 4
Qty. 12
+ 1 spare
Qty. 4 M6
Washer
Qty. 16
+ 1 spare
M8
Washer
Plastic
Washer
Black
Knob
“S” Hook
Qty. 2
Qty. 2
Qty. 4
Qty. 12
+ 1 spare
Assemble your swing on a soft, non-abrasive surface, such as carpeting, to avoid damage.
The swing is heavy. Handle with care.
Two adults may be needed to assemble.
SAFETY INFORMATION
WARNING
CAUTION
Recommended maximum sitting weight for the swing is 400 lbs.
Please read and understand this entire manual before attempting to assemble or install
the product.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
Tools Required for Assembly (included): 2 Allen Wrenches, 1 Hex Wrench, 1 Open Hex Wrench
and 1 Touch Up Paint
PREPARATION
2 hours
AA BB CC DD EE FF GG HH II
JJ KK LL MM
(not to scale)
(not to scale)
3
Allen
Wrench
Hex
Wrench
Open
Hex
Wrench
Touch Up
Paint
Qty. 1
Qty. 2
Qty. 1
Qty. 1
NN OO PP
(not to scale) (not to scale)
(not to scale) (not to scale)
QQ

ASSEMBLY INSTRUCTIONS
FRAME ASSEMBLY
1. Align the two holes at the top of one front
leg (B) with the two holes at one end of the
top frame bar (A). Insert an M8 x 95 L
bolt (FF) through an M8 washer (JJ), through
a leg hole and through top frame bar (A).
Align a back leg (C) on the other side of the
top frame bar (A) and continue the bolt
through the back leg (C), through another M8
washer (JJ) and an M8 nut (HH). Do not
tighten completely. Repeat this procedure
for the adjacent hole and to attach the other
two legs at the other end of top frame bar (A).
Hardware Used
JJ
M8 x 95 L Bolt x 4
M8 Nut x 4
M8 Washer x 8
1
2. Align the two holes of a leg crossbar (E)
with the holes on the front and back legs at
one end of the frame. From the outside,
insert an M6 x 55 L bolt (CC) through the
leg crossbar (E), through a plastic
washer (KK), through the leg, through an
M6 washer (II) and into an M6 nut (GG).
Do not tighten completely. Repeat this
procedure for all four crossbar-to-leg
connections.
Hardware Used
M6 x 55 L Bolt x 4
M6 Washer x 4
Plastic Washer x 4
M6 Nut x 4
2
FF
JJ
HH
CC
GG
II
KK
4
A
B
C
FF HH
JJ JJ
CC
GG
II
KK
BC
E

3. Align the holes of the back crossbar (D) with
the holes in the two back legs (C). For each
hole, insert an M6 x 70 L bolt (DD) through
a back leg (C), through the back crossbar (D),
through an M6 washer (II), and into an M6
nut (GG). Do not tighten completely.
Hardware Used
M6 x 70 L Bolt x 4
M6 Washer x 4
M6 Nut x 4
ASSEMBLY INSTRUCTIONS
4. Align the two holes in the bottom of the left
arm (G) with the holes in the left side of the
sling seat (H). For each hole, insert an
M8 x 45 L bolt (EE) through an M8
washer (JJ), through left arm (G) and into
the sling seat crossbar. Do not tighten
completely. Repeat this procedure on the
other side of the sling seat using the right
arm (F).
Hardware Used
M8 x 45 L Bolt x 4
M8 Washer x 4
SEAT ASSEMBLY
C
GG
II
DD
JJ
EE
5
3
4
DD GG
II
D
G
EE
JJ
F
H

5. Place the sling back (I) between the right
arm (F) and left arm (G), lining up the holes
on the sides. For each hole, insert an
M6 x 40 L bolt (AA) through an M6
washer (II), through back of the arm and into
the sling back (I). Do not tighten completely.
Repeat this procedure on the other side of
the sling back (I) to attach the other arm.
Hardware Used
M6 x 40 L Bolt x 4
M6 Washer x 4
5
6. Align the hole at one end of a short hanging
bar (L) with the sleeve under the front of the
arm. From the inside, insert an M6 x 45 L
bolt (BB) through the sleeve, through the
short hanging bar (L), through an M6
washer (II) and into an M6 nut (GG). Do not
tighten completely. Attach the long hanging
bar (M) to the back of the arm using the same
procedure. Attach remaining two hanging
bars to the other arm in the same way.
Hardware Used
M6 x 45 L Bolt x 4
M6 Washer x 4
6
AA
II
II
BB
6
ASSEMBLY INSTRUCTIONS
I
M
L
BB
II
GG
AA
AA II
II
M6 Nut x 4
GG
HANGER ASSEMBLY
G
F

7. At each end of the seat assembly, bring the
holes in the free ends of the hanging bars
together and thread them onto an “S” hook
(MM). Hang the “S” hooks and seat assembly
from the loops on the top frame bar (A).
7
Hardware Used
“S” Hook x 2
8. Use a black knob (LL) to attach a canopy
side bar (J) to each end of the top frame
bar (A). The fluted circles on the canopy
bars should face the fluted circles on the
top frame bar (A).
8
Hardware Used
Black Knob x 2
MM
LL
7
ASSEMBLY INSTRUCTIONS
LL J
L
MM
M
CANOPY ASSEMBLY
A

10. Hang the magazine bags (N) on the
outsides of the arms, securing with the
hook-and-loop straps.
10
9
9. Place one end of the canopy (K) over one
of the canopy side bars (J), fitting the corner
pockets over the ends of the canopy side
bar (J). Remove the black knob (LL) and
reinsert it through the grommet hole in the
canopy (K). Stretch the canopy (K) over the
top of the swing and repeat procedure on
other canopy side bar (J). You can change
the tilt of the canopy (K) by adjusting the
black knobs (LL). Tighten all nuts and bolts
using hex and Allen wrenches.
N
8
ASSEMBLY INSTRUCTIONS
K
N
J

9
ONE-YEAR LIMITED WARRANTY
Wash with mild soap. Rinse with water and let air dry.
CARE AND MAINTENANCE
This warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your patio furniture provided your furniture is maintained with care and used only
for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1)
year.
Exclusions: Items used for commercial, contract or other non-residential purposes; display
models; items purchased “as is;” or items damaged due to acts of nature, vandalism, misuse or
improper assembly are not covered.
If within the stated warranty period a product is found to be defective in material or workmanship,
the purchaser must contact the manufacturer’s customer service department at 1-800-643-0067.
The manufacturer, at its option, will repair or replace the defective parts.
Cushions, Straps and/or Wicker Weaves are covered for a period of one (1) year against defects
in material or workmanship. Sling fabric is covered for a period of one (1) year against defects in
material or workmanship.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color or a similar style and color if the original is unavailable or has
been discontinued. As some states do not allow exclusions or limitations on an implied warranty,
the above exclusions and limitations may not apply. This warranty gives you specific rights, and
you may also have other rights which vary from state to state.
Printed in China
Replacement canopies may be available for purchase on Lowes.com if out of warranty.

10