Gardena 19032 User manual

EN Operator’s manual
smart Irrigation Control
Art. 19032
EN

1. SAFETY ................................................ 4
2. ASSEMBLY ............................................. 6
3. INSTALLATION........................................... 8
4. OPERATION............................................. 19
5. MAINTENANCE .......................................... 22
6. STORAGE .............................................. 22
7. TROUBLESHOOTING ..................................... 23
8. TECHNICAL DATA ........................................ 24
9. ACCESSORIES .......................................... 25
10. SERVICE / WARRANTY..................................... 26
GARDENA smart Irrigation Control 24 V
2
EN

Original instructions.
For safety reasons, children and young people under 16 as well as
anyone who is not familiar with these operating instructions should not
use the product. Persons with reduced physical or mental abilities
may use the product only if they are supervised or instructed by a responsible
person. Children must be supervised to ensure that they do not play with the
product. Never operate the product when you are tired, ill or under the influ-
ence of alcohol, drugs or medicine.
Intended use:
The GARDENA smart Irrigation Control is intended for private use in
domestic and hobby gardens, exclusively for outdoor use, to control sprinklers
and watering systems. It can be used for automatic watering during holidays.
The GARDENA smart Irrigation Control is part of a garden irrigation
system and can only be programmed together with the GARDENA smart
Gateway Art. 19000.
The GARDENA smart Irrigation Control is controlled automatically with the
GARDENA smart system App. Sprinklers, a sprinkler system or adrip head
watering system can be used for watering.
The GARDENA smart Irrigation Control carries out watering fully automati-
cally according to the set program and can therefore also be used during
holidays. Early in the morning or late in the evening, evaporation and therefore
water consumption is lowest.
DANGER! Risk of injury!
The product must not be used for industrial purposes or in
conjunction with chemicals, foodstuffs, easily flammable and
explosive materials.
3
EN

1. SAFETY
Important!
Read the operator’s manual
carefully before use and keep
for future reference.
Electrical safety
DANGER! Cardiac arrest!
This product makes an electro-
magnetic field while it operates.
This field may under some con-
ditions interfere with active or
passive medical implants.
To decrease the risk of condi-
tions that can possibly injure or
kill, we recommend persons
with medical implants to speak
with their physician and the
medical implant manufacturer
before you operate the product.
DANGER!
Electric shock!
Risk of injury due to electric
shock.
The product must be supplied
through a residual current device
(RCD) having a rated residual
operating current not exceeding
30 mA.
The product must only be operated
with the 24 V (AC) power supply unit
provided.
Protect the 24 V (AC) power supply
unit from moisture and direct sunlight
when connected.
Check the power cord for damage
before use.
The product must be used only for
controlling commercially available
24V (AC) valves. The electric power
consumption per channel must not
exceed 500 mA (a GARDENA
Irrigation Valve Art.1278 requires
150 mA).
Cable cross-section of the
connection cable:
The maximum permissible distance
between the product and the valve
depends on the cross-section of the
connection cable. For a distance of
30m, the cross section is 0.5 mm2
and 0.75 mm2for a distance of
45m. No more than 3 valves must
be in operation at the same time.
The GARDENA Connection Cable
Art. 1280 is 0.5 mm2in size and is
15 m long.
Up to 6 valves can be connected
using this cable. The connection
cable can be connected so that it is
watertight using the GARDENA
Cable Clip Art. 1282.
Personal safety
DANGER!
Risk of suffocation!
Small parts can be easily swal-
lowed. There is also a risk that
the polybag can suffocate tod-
dlers. Keep toddlers away when
you assemble the product.
4
EN

Protect the product from direct
sunlight.
Be careful when touching
the valves!
Metal parts can heat up.
5
EN

2. ASSEMBLY
To assemble the irrigation control on the wall:
The both screws and dowels are in the skope of delivery.
The distance between the holes is 120 mm.
1
1. Remove the cover 1.
6
EN

24 VACVALVES
S/N: 00000000
MASTER
1234 56CCM
TOP
RESET 5s
120 mm
2. Mark the positions of the holes. To do this, hold the Irrigation Control
against the wall, bring it straight and mark 2 holes at a distance of
120mm.
3. Drill the holes and assemble the Irrigation Control to the wall with the
2plugs and screws supplied.
NOTE:
The cables must be led downwards!
Pay attention to the cable lengths, especially during initial installation.
If you want to mount several irrigation controls, the distance between the holes
is 150 mm.
Due to the cable routing, up to 3 Irrigation Controls can be assembled on top
of each other.
7
EN

3. INSTALLATION
To remove the cable strain relief:
24 VACVALVES
S/N: 00000000
TOP
RESET 5s
MASTER
1234 56CCM
4
3
vLoosen both screws 3and remove the cable strain relief 4.
8
EN

Connection overview:
123456CCCC 123456CCCC
24 VACVALV ES
S/N: 00000000
TOP
RESET 5s
MASTER
1234 56CCM
24 VAC
POWER
SUPPLY
PUMP
CONTROL
V1 V2 V3
(ART. 1278) (ART. 1278)
(ART. 1255)
(ART. 1278)
V4 V5 V6
(ART. 1278) (ART. 1278) (ART. 1278)
(ART. 1255)
Valve Box Art. 1255 Valve Box Art. 1255
9
EN

To connect the valves to the Valve Box:
Make sure that the terminal block has been correctly installed in the
valve box.
!
123456CCCC
V1 V2 V3
(ART. 1278) (ART. 1278) (ART. 1278)
v Label the valves (1 – 6) with the yellow stickers of the valve box.
(Therefore the cable terminals VALVES 1 – 6 of the Irrigation Control can
be clearly assigned to the valves).
10
EN