Gardeners Essex Roman Arch User manual

TOOLS REQUIRED (2)
Wrench 12-13
PARTS LIST
(2) Curved Panels
(2) Upper Panels
(2) Lower Panels
(4) Ground Stakes
(6) M8 Hex Screw
(2) M8 Nut
1. Align the curved panels and assemble with the screws and nuts provided.
NOTE: Assembly is best with two people. It is easiest to assemble your arch on the ground and
then tip it up when complete. Choose a flat, clean surface to execute your assembly.
TIP: Hand tighten all bolts until the whole unit is assembled. Straighten parts and make sure
alignment is square. Then tighten all nuts with the wrench.
Over please
Curved Panels
ESSEX ROMAN ARCH

3.Insert the lower panel on one side and repeat on the other side.
4.Insert all ground stakes and assemble.
# 8613043 06/2022
Lower Panels
Ground Stakes
2. Align the assembled arch with the upper panel and hand tighten the screws as shown;repeat the same
on the other side.
Upper Panels
M8 Hex Screw & Nut
M8 Hex Screw