Gardeners Kylemore 8592686 User manual

G Rev /#, , 
Kylemore Self-Watering Urn
These shapely urns make an impressive statement lining a path or flanking
an entryway. They’re made from a lightweight resin with a hand-painted
mineral finish that resembles authentic stoneware. Inside is our self-watering
system to help reduce watering chores and provide plants with the consistent
moisture they need to thrive.
Parts List
() Urn
() Reservoir Platform
() Fill Tube with Cap
() Fill Tube Extension
Assembly
Step 1. Push the Reservoir Platform down into the
Urn until the feet are resting on the bottom.
The Platform’s wings will automatically adjust
to the sides of the planter, forming a water
reservoir at the base of the urn.
Step 2. Slide the Fill Tube with Cap into the
wider end of the Fill Tube Extension. Place
the other end of the Extension into the
round opening in the Top of the Reservoir
Platform.
Step 3. Close the Fill Tube Cap before
you start planting. The Kylemore Self-
Watering Urn holds  quarts of mix. We
recommend our Self-Watering Potting
Mix, as well as a slow-release granular
fertilizer, such as our All-Purpose Fertilizer.
Pre-moisten the planting mix and fill your
planter to within "-" of the top edge.
Add your plants, as well as any additional planting mix as needed.
Step 4. After planting, water the soil from the top to settle the plants' roots and
to ensure the soil is thoroughly moist. Fill the reservoir with water through
the Fill Tube.
feet
wings
Reservoir
Platform
Fill Tube
with Cap
Fill Tube Cap
Fill Tube
Extension
Self-Watering
Components
over please

Phone Orders: 1-800-427-3363 • Customer Service: 1-800-876-5520
e-mail: [e-mail] • Web: www.gardeners.com
Care Instructions
Continue to water your planter from the top until your plants are well
established. Check soil moisture regularly. Daily inspection may be necessary,
especially if you live in a hot, dry climate or experience extended periods of dry
weather.
During winter months, your planter can withstand temperatures down to
-°F. However, you will first need to empty it of soil and water which can
freeze and expand, causing the urn to crack or split. To avoid damage, we
recommend emptying and cleaning your container before freezing weather sets
in. If temperatures will be lower than -°F, please store the urn in a protected
location.
To overwinter hardy plants, move the urn into a sheltered place that remains
just above freezing. Water sparingly and do not fertilize until spring. Once warm
weather arrives, repot the plants in a fresh potting mix.
About Drainage: This planter has an overflow drainage hole, so when the water
reservoir is full, any excess water will drain out. The draining water can stain
surfaces under the Kylemore Self-Watering Urn. For outdoor use only.
For more self-watering products, please visit us at www.gardeners.com.