Gardeners Cedar Three Bin Composter User manual

1-800-876-5520 • gardeners.com
[e-mail]
8% of our profits go back to our communities.
Learn more at gardeners.com/FoRCE-FoR-GoOD
Parts List
Tools Required
1. Slide 1 Pre-Assembled Panel without corners in between 2 Pre-Assembled Panels with outside & in-line corners. With the in-line
corners in the middle and the outside corners on the end. Make sure tall three pieces are flush with the corners before screwing
together.
Rev 8/2023
#8614028
Cedar Three Bin Composter
PLEASE
RECYCLE
2. Place 2 Pre-Assembled Panels without corners into the outside corners on both sides to form the ends of the composter, the
vertical wood strips should face into the composter. Make sure they are flush with the top and bottom before screwing together.
(2)Pre-Assembled Panels with outside & in-line corners
(5)Pre-Assembled Panels without corners
(2)Pre-Assembled Front Panels with outside & in-line corners
& front door
(1)Pre-Assembled Front Panel with a front door
(3)Top Lids (center is smallest)
(1) Barrel Bolt with screws
(8)Plastic Caps
(96).75" Screws
(2)3.5" x 24" Boards for center bin
(8)1.5" Screws for 2 center bin boards
Power Drill with Phillips Head Assembly easiest with two people
Allot 90 minutes for assembly with 2 people

1-800-876-5520 • gardeners.com
[e-mail]
8% of our profits go back to our communities.
Learn more at gardeners.com/FoRCE-FoR-GoOD
Rev 8/2023
#8614028
Cedar Three Bin Composter
PLEASE
RECYCLE
3. Take 2 Pre-Assembled Panels without corners and place them on the in-line corners in the center making sure that the panels
with wood strips and facing out towards the other panels with wood strips. Use screws to attach corner. Stand the composter up.
4. Take 2 Pre-Assembled Front Panels with outside & in-line corners & front door and attach making sure the handles are at the
bottom and face out. Make sure the panels are flush. You need to be able to open the door to assemble the bottom screws.

1-800-876-5520 • gardeners.com
[e-mail]
8% of our profits go back to our communities.
Learn more at gardeners.com/FoRCE-FoR-GoOD
5. Take the Boards for center bin and use (4) 1.5" Screws to secure the top board of the middle bin, make sure the board is flush at
the top. Repeat on both sides.
Rev 8/2023
#8614028
Cedar Three Bin Composter
PLEASE
RECYCLE
6. Take remaining front panel with no corners and slide into the in-line corners on the center bin, making sure top panel is
flush with other panels before screwing in.
7. Slide the barrel bolt into the catch on the corner. Insert screw into one corners of the barrel bolt to make sure that the bolt
slides into the latch smoothly. Install the other screws.

1-800-876-5520 • gardeners.com
[e-mail]
8% of our profits go back to our communities.
Learn more at gardeners.com/FoRCE-FoR-GoOD
8.Lightly tap all 8 Plastic Caps into the corners with a hammer, or firmly push with your hand.
Rev 8/2023
#8614028
Cedar Three Bin Composter
PLEASE
RECYCLE
9. Place the two larger lids on the outside, and the narrower lid on the middle bin.