Gardeners 8598597 User manual

V Rev /#
Double Sphere Wind Spinner
This Wind Spinner is a great way to draw attention to your yard. The spinning
spheres provide double the movement and make for a fun display.
Parts List Tools required
() Base Pole with Stake Phillips screwdriver
() Footed Stake Support
() Center Poles
() Sphere Support
() Large Sphere Pieces
() Small Sphere
() Bolts
Assembly
NOTE: Assembly is easiest with two people.
Step 1. Select a location to place your Wind
Spinner that is away from children’s play
areas. Important: The Wind Spinner must
be installed in firm soil. If you have loose
or sandy soil, we recommend securing it in
concrete.
Step 2. Slide the Footed Stake Support onto the
Base Pole and position it so the cutout sits
over the attached Stake (Figure ).
Step 3. Screw the Center Poles together, then
screw them on top of the Base Pole (Figure ).
Step 4. Examine the top and bottom of a Large
Sphere Piece to find the small pin that sticks
out (Figure , other side). Slide the pin
through one of the small holes in the bottom
of the Sphere Support, then line up the holes
in both the top and bottom of the Piece with the larger ones on the Support.
Use your Phillips Screwdriver to place Bolts through both sets of holes.
Repeat to attach the remaining  Large Sphere Pieces.
over please
Base Pole
with Stake
Footed
Stake
Support
Center
Poles
Figure 1

Phone Orders: 1-800-427-3363 • Customer Service: 1-800-876-5520
e-mail: inf[email protected]om • Web: www.gardeners.com
Step 5. Screw the Large Sphere on top of the Center
Pole and the Small Sphere on top of the Large
Sphere (Figure ).
Step 6. Position your Spinner in the chosen spot
and press the Stakes fully into the ground. Your
assembly is complete!
We recommend annually cleaning and lubricating
your Wind Spinner. The powder-coated steel is
weather-resistant. However if the finish is nicked or
scratched, use an exterior-grade metal paint to prevent
rust.
For more garden decorations and ideas,
please visit us at gardeners.com.
Small Sphere
assembled
Large Sphere
Center Pole
Figure 3
assembled Large Sphere
Figure 2
Sphere Support
(underside)
Bolt
pin
Large Sphere Piece