Garmin KT 15 Instruction manual

CONFIDENTIAL
This drawing and the specifications contained herein are the property of
GARMIN Ltd. or its subsidiaries and may not be reproduced or used in whole or
in part as the basis for manufacture or sale of products without written
permission.
Garmin Ltd. or its subsidiaries
C/O Garmin International, Inc.
1200 E. 151st Street
Olathe, Kansas 66062 USA
Sheet 1 of 1
Specification Control Document
Drawing Number:
190-02265-90
Description:
KT15 Quick Start Manual (ML)
Revision:
A
Drawn By:
MEH 07/12/17
Revision History
Rev.
Date
Description of Change
ECO No.
A
07/12/17
Production Release
----
Printing Specifications
Tolerance:
±0.0787" (±2 mm)
Material:
100-lb matte finish offset. Approved equivalents allowed.
Color:
4-color process.
Bindery:
Saddle stitch. Approved equivalents allowed.
Folds:
Not applicable
Trimmed Dimensions:
9.5 x 4.75 in.
Finished Dimensions:
4.75x4.75 in.
Notes:
This part shall comply with Garmin Banned & Restricted Substances (GPN 001-00211-00).
Content Management System (CMS) Details
GUID:
GUID-92F39E97-605C-43B4-95B8-66B4D37E3341
Version:
1
Language(s):
EN-US, FR-FR, IT-IT, DE-DE, ES-XM, PT-PT, NL-NL, CS-CZ, HU-HU, RO-RO
Notes

KT 15
Quick Start Manual 2
Manuel de démarrage
rapide 7
Manuale di avvio rapido 13
Schnellstartanleitung 19
Guía de inicio rápido 25
Manual de Início Rápido 31
Snelstartgids 37
Stručný návod k obsluze 43
Kezdő lépések 49
Manual de iniţiere rapidă 55

KT 15
Quick Start Manual
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
Dog Collar Device
NOTE: Your dog collar device may look
different than the device pictured.
ÀVHF antenna
ÁGPS antenna
ÂPower key
ÃContact points
ÄStatus LED and flashing beacon LEDs
Turning On the Devices
• On the dog collar device, hold the
power key until the status LED flashes
and the collar beeps.
Turning Off the Device
• On the dog collar device, hold the
power key until the status LED turns
solid red, and release the power key.
The device beeps.
Charging the Dog Collar Device
NOTICE
To prevent corrosion, thoroughly dry the
contacts on the collar and the surrounding
area before connecting the charging clip.
NOTE: Your dog collar device may look
different than the device pictured.
You should fully charge the battery before
you use the device for the first time.
Charging a fully depleted battery takes
about five hours.
2 Quick Start Manual

1Snap the charging clip À onto the
device Á.
2Plug the small end of the power cable
into the mini-USB port on the charging
clip cable.
3Plug the power cable into a power
source.
The status LED is solid red when the
collar is charging.
4After the status LED turns solid green,
remove the charging clip from the
collar.
Acquiring Satellite Signals
Both the collar and handheld device must
acquire satellite signals before you put the
collar on your dog. Acquiring satellites can
take a few minutes.
1Go outdoors to an open area.
2Turn on both devices (page 2).
3Select the power key on the handheld
device.
shows the GPS signal strength.
When the collar has acquired satellite
signals, the status LED flashes a double-
blink or triple-blink in green.
Adding a Dog to the Atemos® 100
Handheld Using Wireless Pairing
1If the dog collar device is on, turn off
the dog collar device.
2Hold until the dog collar device
emits two series of beeps (about 2
seconds), and then release .
The status LED flashes rapidly in
green. The dog collar device is now
ready to be linked, or paired, with a
handheld device.
3On the handheld device, select Dog
List > Add Dog.
4Bring the dog collar device near the
handheld device, and select Yes.
5After successfully adding the dog
collar device, enter the name of the
dog, and select > OK.
Quick Start Manual 3

Selecting and Installing the Contact
Points
For best results, select the correct contact
points based on your dog's coat.
1Select the correct contact point length
for your dog's coat type:
• For dogs with thicker coats, use
the longer contact points.
• For dogs with shorter coats, use
the shorter contact points.
2If necessary, use the included wrench
to remove the contact points.
3Twist the contact points into the collar.
4Tighten with the included wrench, but
do not overtighten.
When you put the collar on the dog, make
sure the contact points are tight against
the neck.
Fitting the Collar on Your Dog
CAUTION
To prevent irritation from the contact
points, remove the collar for at least eight
hours out of every 24-hour period.
This device is not intended for human use.
Do not attempt to use on any person.
Do not spray the device or collar with
harsh chemicals including but not limited
to flea or tick spray. Always ensure that
any flea or tick spray that is applied to the
dog is completely dry before placing the
collar on the dog. Small amounts of harsh
chemicals can damage the plastic
components and collar laminate.
In order to effectively train the dog, the
collar and device must fit the dog properly.
If the collar is too loose or positioned
incorrectly, stimulation may be
inconsistent. This can delay or prevent
successful training.
1Position the device at the front of the
dog's neck, with the status LED facing
toward the dog's chin and the contact
points against the throat.
2Tighten the strap so that it is very snug
around the dog's neck, and fasten the
buckle.
NOTE: The collar should fit tightly and
should not be able to rotate or slide on
the dog's neck. The dog must be able
to swallow food and water normally.
You should observe your dog's
behavior to verify that the collar is not
too tight.
4 Quick Start Manual

3Wiggle the device to work the contact
points through the dog's coat.
NOTE: The contact points must have
contact with the dog's skin to be
effective.
4If the strap is too long, cut off the
excess, leaving at least 8 cm (3 in.) to
spare.
TIP: You can mark the hole used to
fasten the buckle for future reference.
Dog Tracking and Training
One Atemos handheld device can track up
to 20 devices (KT 15 dog collar devices
and Atemos handheld devices).
Dog Tracking
The handheld device allows you to track
your dog, using the tracking compass or
map. The map displays your location and
your dog's location and tracks. The
compass pointer indicates the direction of
the dog's current location.
Dog Training
You should research and investigate the
training methods best suited for you, your
dog, and your needs. This manual
provides some basic guidelines for
training, but each dog has unique training
needs.
When used properly, the Atemos training
system is a very effective training tool to
aid your dog in reaching its full potential.
The use of the training system should be
part of an overall training program.
Begin training your dog on a leash, without
the Atemos training system. You should
train your dog how to heel, sit, and come
to you. After the dog understands these
three basic commands, you can begin
training with the dog collar device and the
leash. Finally, when the dog consistently
obeys commands using the leash and
collar, you may be able to remove the
leash to train with only the dog collar
device.
Quick Start Manual 5

Communication with the Collar
You should keep an unobstructed line of
sight between your handheld device and
the dog collar device to produce the best
communication signal. To achieve the best
line-of-sight conditions, you should move
to the highest elevation point in your area
(for example, on the top of a hill).
Best
Good
Poor
Device Information
Getting the Owner's Manual
You can get the latest owner's manual
from the web.
1Go to www.garmin.com/support.
2Select Manuals.
3Follow the on-screen instructions to
select your product.
Updating the Software
Before you can update the handheld
device or collar software, you must
connect the handheld device or the collar
to the computer.
You must update the software on the
handheld device and collar separately.
NOTE: Updating the software does not
erase any of your data or settings.
1Go to www.garmin.com/products
/webupdater.
2Follow the on-screen instructions.
VHF Radio Information
This product may be used only on specific
radio frequencies, which vary depending
on the country of use. The handheld
device and the dog device allow the user
to install a different antenna. Changing the
antenna can result in improved radio
performance and higher radiated power.
You must not use the device with a third
party antenna or an antenna not approved
by Garmin®. Go to www.garmin.com
/tracking-legal for details about the
performance and radio frequency of this
product, lawful accessories, and power
limits for countries.
6 Quick Start Manual

KT 15 Dog Collar Device Specifications
Operating
temperature range From -20° to 60°C (from -4° to 140°F)
Charging
temperature range From 0° to 40°C (from 32° to 104°F )
Wireless
frequencies/
protocols
169 MHz @ 26.84 dBm,
2.4 GHz @ 6.16 dBm
Water rating 1 ATM*
*The device withstands pressure
equivalent to a depth of 10 m. For more
information, go to www.garmin.com
/waterrating.
KT 15
Manuel de démarrage rapide
Mise en route
AVERTISSEMENT
Consultez le guide Informations
importantes sur le produit et la sécurité
inclus dans l'emballage du produit pour
prendre connaissance des avertissements
et autres informations sur le produit.
Appareil pour collier de chien
REMARQUE : votre appareil pour collier
de chien peut avoir une apparence
différente par rapport à l'image.
ÀAntenne VHF
ÁAntenne GPS
ÂBouton Marche/Arrêt
ÃPoints de contact
ÄVoyant DEL d'état et balises clignotantes
à LED
Mise sous tension des appareils
• Sur l'appareil pour collier de chien,
appuyez sur le bouton Marche/Arrêt
jusqu'à ce que le voyant DEL d'état
clignote et que le collier émette un
signal sonore.
Manuel de démarrage rapide 7

Mise hors tension de l'appareil
• Sur l'appareil pour collier de chien,
appuyez sur le bouton Marche/Arrêt
jusqu'à ce que le voyant DEL d'état
s'allume rouge puis relâchez le bouton.
L'appareil émet un bip sonore.
Chargement de l'appareil pour collier
de chien
AVIS
Pour éviter tout risque de corrosion,
essuyez soigneusement les contacts du
collier et la zone environnante avant de
connecter l'appareil au clip de
chargement.
REMARQUE : votre appareil pour collier
de chien peut avoir une apparence
différente par rapport à l'image.
Veuillez charger complètement la batterie
avant d'utiliser l'appareil pour la première
fois. Le chargement d'une batterie
complètement déchargée dure environ
cinq heures.
1Refermez le clip de chargement À sur
l'appareil Á.
2Branchez la petite extrémité du câble
d'alimentation dans le port mini-USB
situé sur le câble du clip de
chargement.
3Branchez le câble d'alimentation sur
une source d'alimentation.
Le voyant DEL d'état reste rouge
pendant toute la durée du chargement
du collier.
4Lorsque le voyant DEL d'état est vert,
retirez le clip de chargement du collier.
Acquisition des signaux satellites
Avant de placer le collier sur le cou de
votre chien, le collier et l'appareil portable
doivent acquérir des signaux satellites.
L'acquisition des signaux satellites peut
prendre quelques minutes.
1Placez-vous à l'extérieur dans une
zone dégagée.
8 Manuel de démarrage rapide

2Mettez les deux appareils sous tension
(page 7).
3Sélectionnez le bouton Marche/Arrêt
sur l'appareil portable.
indique l'intensité du signal GPS.
Lorsque des signaux satellites ont été
captés par l'appareil, le voyant DEL d'état
clignote en vert à deux ou trois reprises.
Ajout d'un chien à l'appareil portable
Atemos 100 par couplage sans fil
1Si le collier pour chien est allumé,
éteignez-le.
2Appuyez sur le bouton jusqu'à ce
que l'appareil pour collier de chien
émette deux séries de bips (environ
2 secondes), puis relâchez le bouton
.
Le voyant DEL d'état clignote
rapidement en vert. L'appareil pour
collier de chien est maintenant prêt à
être lié, ou couplé , avec l'appareil
portable.
3Sur l'appareil portable, sélectionnez
Liste des chiens > Ajouter un chien.
4Placez l'appareil pour collier de chien
près de l'appareil portable, et
sélectionnezOui.
5Après avoir ajouté l'appareil pour
collier de chien, saisissez le nom du
chien et sélectionnez > OK.
Sélection et installation des points de
contact
Pour des résultats optimaux, sélectionnez
les points de contact en fonction du pelage
du chien.
1Sélectionnez la longueur des points de
contact en fonction du pelage du
chien :
• Plus le pelage du chien est épais,
plus les points de contact doivent
être longs.
• Plus le pelage du chien est court,
plus les points de contact doivent
être courts.
2Si nécessaire, utilisez la clé incluse
pour retirer les points de contact.
3Fixez les points de contact dans le
collier.
4Serrez-les à l'aide de la clé fournie,
mais ne serrez pas outre mesure.
Lorsque vous placez le collier sur le chien,
assurez-vous que les points de contact
sont correctement ajustés autour de son
cou.
Manuel de démarrage rapide 9