GE Profile PTWN6250MWT Manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
PTWN6250M
GE Profile™4.3 IEC cu. ft. stainless steel capacity washer
Specification Revised 1/11 260192
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Dimensions and Installation Information (in inches)
36
25-1/2
42
51
Side View
27
Rear View

Features and Benefits
• ENERGY STAR®qualified and CEE Tier II rated - Meets or exceeds federal
guidelines for energy efficiency for year-round energy and money savings
• HydroWave wash system with HE LoWater wash and Infusor™- Utilizes the
concentrated power of HE detergent, requiring less water than a traditional
topload washer to get clothes clean
• PreciseFill - Washer will automatically measure the load size and add just the
right amount of water
• 700 RPM spin speed - Fast speeds remove more water during the spin cycle
to minimize drying time
• GE Profile warranty - Offers a lifetime warranty on the stainless tub and a
limited ten-year parts warranty, providing peace of mind and dependability
See written warranty for details
• Speed Wash - Provides a quick wash for lightly soiled items that are needed
in a hurry
• Specialty cycles - Pre-set cycles are designed to provide superior care for
specific items
• Quiet-By-Design™ - Special insulating materials help muffle operating noise
• Model PTWN6250MWT – White
PTWN6250MWT
Modified Energy Factor (MEF) 2.20
Water Factor (WF) 4.50
PTWN6250M
GE Profile™4.3 IEC cu. ft. stainless steel capacity washer
Specification Revised 1/11 260192