Gema Easy 1-C Guide

EASY 1-C
Issued 05/00
EASY 1-C
Issued 05/00
Operating Instructions and Spare parts list
EASY 1-C
Powder Coating Equipment
E
Please fold out this page when
studying this documentation!

15
EASY 1-C
Issued 05/00
SPARE PARTS LIST
ORDERING SPARE PARTS
When ordering Spare parts for powder coating equipment, please
indicate the following specifications:
1. Type and serial number of your powder coating equipment
2. Order number, quantity, and description of each spare part
Example:
1. Type EASY 1-C, Serial No.: XXX XXX
2. Order No.: 201 073, 5 pieces, Fine wire fuse
When ordering cable and hose material the length required must be
given.
The spare part numbers of yard/meter ware always begins with 1.....
and are always marked with an * in the spare parts list.
Wear parts are always marked with a #.
All dimensions for plastic powder hoses are given as external diameter
(o/d) and internal diameter (i/d):
e. g. ø 8 / 6 mm, 8 mm outside diameter / 6 mm inside diameter
(i/d).

16 EASY 1-C
Issued 05/00
*Please indicate length required
#Wear parts
EASY 1-C POWDER COATING EQUIPMENT
Quick reference sheet 262 714
1 EasyTronic Control unit - complete 375 900
2 EasySelect-Cup Manual powder gun
– see separate Spare Parts List
3 Pneumatic connection (Conveying air) 6 m - red
incl. Screw connection and Quick-coupling 381 217
Pneumatic connection (Conveying air) 12 m - red
incl. Screw connection and Quick-coupling 381 225
4 Rubber pad 234 915
5 Spacer 382 191
6 Hex. Screw - M6 x 1 mm 213 829
7 Spring washer - M6 205 117
8 Grounding cable - complete 301 140
9 EasyTronic Mains cable 378 771
10 Base 382 205
11 Column support - FS30 242 667
12 Clamping element - ø 30 mm - complete 376 183
13 Column - complete 382 302
14 Powder gun holder - complete 382108
Double adapter - 1/4"-1/4"
(for Main compressed air connection - 1.1 IN) 262 510

17
EASY 1-C
Issued 05/00
EASY 1-C POWDER COATING EQUIPMENT
Figure 6
10
11
2
6; 7
14
13
4
5
1
2
3
8
9
12