Gemini GBF40WH User manual

BLADELESS HEPA &
CARBON FILTER
TOWER FAN
GBF40WH
無葉HEPA及活性炭過濾
直立風扇
Please read this instruction manual carefully
before use and keep it for future reference
請於使用前仔細閱讀本說明書並加以保存

220-240V~50-60Hz
1

2

MAIN PARTS
Remove
control
Power
on/off
Timer
Sleeping
mode
Oscillation
Natural
wind mode
Speed-
Soft wind
Natural wind
Timer icon
Oscillation
angle
Oscillation
Timer
Speed
Mode
Power
Oscillation
Timer
Speed
Mode
Power
Filter
and cover
Air outlet
Control panel
Bottom
turntable
Speed+
Adapter input plug
output
plug
3

PRODUCT SIZE
󾙓󾙒󾙔󾙖
󾙔󾙘󾙙 󾙓󾙛󾙗
After taking the bladeless fan out of the package, take out the protective
piece of the adapter, place the fan on a stable ground or desktop, insert
the output plug of the power adapter (DC24V 1.5A) into the power input
interface at the bottom of the fan head, and then The adapter input plug
plugs into a household electrical outlet.
The fan enters the standby state, and the display lights up " - - ". Power
on the fan by touching the power button on the control panel, or using
the remote control to for operation.
USING GUIDE
The power interface of the fan is located on the side of the bottom turntable;
the fan is worked with 8 speeds when power on by default .
4

OPERATION GUIDE
Pay attention!
Do not forcibly turn the fan's oscillation angle or external force
to hinder its normal oscillation process, otherwise it may
damage the mechanical structure of the fan and affect its use.
1、POWER ON/OFF
After plug on press the Power button“ ”, the machine will enter the normal
work model. Press the Power button “ ” again, the machine will enter the
standby state.
2、ADJUST THE WIND SPEED
After power on, press the Speed button “ ” or press the “ +/- ”of the remote
control to adjust the speed, the display will show corresponding speed. When
it is in the highest speed “12 ”, if you touch the speed button “ ” again, the
speed will continue to cycle from speed 1. The speed will not cycle during
remote control operation.
3、MODE SETTING
Press the Mode “ ” on machine or remote control to set the wind mode, wind
model will change according to Normal wind-Nature wind-Sleeping wind.
Nature wind mode: This icon of Nature wind “ ” will light up, the display screen
will show “ ” , the wind speed simulates the natural wind, and the change of
large and small winds.
Sleeping wind mode: the icon of the sleeping mode “ ” will light up, the display
screen will show “ ” , the wind speed will be changed to suitable for sleep.
4、TIMER SETTING
Press the Timer button “ ” for timer adjustment during the machine is working,
the “ h ” will flash and display the timer time. The digit will will flash 5S means the
setting the timer successfully and the timer will start running. The timer setting
can be up to 12 hours. When “ 00 ” hours are displayed, the timer function is
turned off.
5、OSCILLATION SETTING
Press the Oscillation button “ ” start the oscillation funtion, the max scillation
angle can be 120°. Each time touching the Oscillation button “ ” , the oscillation
angle will be 60°, 90°, and 120° in turn, until the oscillation function is turned off.
5

MAINTENANCE
Pay attention!
Before cleaning and maintenance, the power supply must be
disconnected, the whole machine should not be immersed in
water, and the machine should not be sprayed.
It is recommended to clean and maintain the machine every 3 to 4 weeks
to ensure that the fan works more efficiently and the air outlet is cleaner.
Remove the filter of the machine, use a vacuum cleaner or a dry brush for
cleaning, use a low-humidity dish towel to wipe the dust on the place where
the filter is placed, put the filter back and cover it after drying.
In order to ensure the purification effect, the filter can be replaced regularly
depending on the actual situation, and the customer service staff can be
consulted for the purchase of special accessories.
When cleaning the appearance of the product, please wipe the product
with a soft and clean cloth. To remove stubborn stains, be sure to use a
mild and neutral detergent. After cleaning, wait for the surface to dry before
turning it on.
6、DISPLAY LIGHT STATUS
In normal wind and natural wind modes, if there is no operation for 60 seconds,
the screen brightness will be reduced by half, and if there is no operation for 10
minutes, the screen will turn off. In sleeping wind mode, if there is no operation
for 30s, the screen brightness will be reduced by half, and if there is no operation
for 5 minutes, the screen will automatically turn off.
Pull the buckle
upward to open the
filter screen cover
Activated
carbon filter
HEPA
filter
6

Product name
Model
Input voltage
Rated Frequency
Rated power
Input data
Output date
Product size
Net Weight
PRODUCT PARAMETERS
BLADELESS HEPA & CARBON FILTER TOWER FAN
GBF40WH
24V
50Hz
36W
220-240V~50-60Hz 1.2A
24V 1.5A
1024*195*267 mm
3.1kg
*The final product specification may be varied according to a different
lot of matetial and actual input voltage power of the usage area.
7

MALFUNCTION PRECLUDE
The adapter is not properly
plugged into the power source. Re-plug the adapter
Damaged power cord
Damaged motor
Internal damage to
the remote control
The remote control
battery is low
The remote control is
too far away
Remote control battery
installed incorrectly
Oscillation structure damage
Oscillation structure damage
Damaged oscillation motor
A foreign object is
stuck on the turntable
The circuit board is damaged
Foreign objects entering the fan
Damaged fan blades or casing
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Replace with new
remote control batteries
Check whether the positive
and negative poles of the
battery are correct
Use close to the fan
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Contact Designated
Maintenance center
Check and remove
the foreign objects
Mismatched adapter used Use the adapter configured
with the machine
Don not turn on the Power
On/Off button of the remote
control / control panel.
Turn on the Power On/Off
button of the remote
control / control panel.
Can not turn
on the machine
The product has
abnormal sound
The machine do not
oscillation / or stuck
when oscillation
Remote control
is not sensitive
Malfunction description Possible reason Measures
8

9

遙控器
開啟/停止 時間掣
睡眠模式
搖擺
自然風模式
風速-
睡眠風
自 然 風
時間顯示
搖擺角度
搖擺按鍵
時間掣按鍵
風速選擇按鍵
模式選擇按鍵
電源開關按鍵
Oscillation
Timer
Speed
Mode
Power
濾網蓋板
出風口
控制/狀態面板
底部轉盤
風速+
適配器 輸入插頭
輸出插頭
主要零部件
10

󾙓󾙒󾙔󾙖
󾙔󾙘󾙙 󾙓󾙛󾙗
產品尺寸
使用指南
將無葉風扇從包裝中取出後，取出電源接頭上的保護件後，將風扇置於平穩
的地面或桌面，將電源適配器輸出插頭（DC24V 1.5A）插入扇頭底部的電源
輸入介面，再將適配器輸入插頭插入家用電源插座。
風扇進入待機狀態，顯示幕亮起“- -”，可通過控制面板上觸摸電源按鍵啟
動風扇，也可用遙控器進行控制操作。
風扇機身電源介面位於底部轉盤側邊處；風扇開機默認8檔風速啟動。
11

操作說明
注意：不得強行扳動風扇搖擺角度或外力阻礙其正常搖擺過程，否則
可能損壞風扇的機械結構，影響使用。
1、開/關機
接通電源後在待機狀態按下電源按鍵“ ”，風扇進入普通風工作模式，再次
按下電源按鍵“ ”，機器進入待機狀態。
2、風速調節
風扇在開機後，每輕觸風速選擇按鍵“ ”或按遙控器上風速+/-按鍵一次，
機器短暫蜂鳴提示，進行加/減檔調節，機器上的數碼屏顯示相應檔位。當最
高檔位到12檔，若再輕觸機身風速選擇按鍵“ ”，則檔位從1檔開始繼續循
環，遙控器操作時檔位不循環。
3、風類設置
輕觸機身模式選擇按鍵“ ”或按遙控器風類按鍵，每輕觸機身模式選擇按鍵
“ ”一次，風類按普通風⸺自然風⸺睡眠風循環變換。
自然風模式：自然風“ ”燈點亮，檔位顯示“ ”，風速模擬自然風效果，
大小風更替變化；
睡眠風模式：睡眠風“ ”燈點亮，檔位顯示“ ”，風速智能變化適合睡眠；
4、定時設置
風扇在運行時，輕觸時間掣按鍵“ ”進行定時設定，數碼屏“ h ”閃爍，並
顯示定時時間，螢幕閃爍5秒後鎖定定時設置並開始計時運行，每5分鐘顯示一次
剩餘時間，定時設定最長12小時，當顯示00時長，定時功能關閉。
5、搖擺設置
風扇在運行時，輕觸搖擺按鍵“ ”開啟風扇搖擺功能，風扇搖擺角度為120°，
每輕觸搖擺按鍵“ ”一次，搖擺角度依次為60°、90°、120°循環變換，直至
關閉搖擺功能。
6、顯示燈狀態
正常風和自然風模式下，60s無操作，螢幕亮度減少一半，10分鐘無操作，螢幕
將熄滅；睡眠風模式下，30s無操作，螢幕亮度減少一半，5分鐘無操作，螢幕
將自動熄滅。
12

產品型號：GBF40WH
額定電壓：24V
適配器輸入：220-240V~50-60Hz 1.2A
適配器輸出：24V 1.5A
額定功率：36W
產品尺寸：1024高x267闊x195深 毫米
淨重重量：3.1kg
*相關產品的規格，可能會因配件批次或實際使用地區的電壓差異而有
所不同。
產品規格
清潔維護
在清潔維護前，必須斷開電源，機身整機不可浸水，不能對風扇進行噴霧操作。
注意
建議每3-4周對風扇進行一次清潔維護，以保證風扇的工作更有效，出風
更清潔；
可拆出機器過濾芯，使用吸塵器或幹毛刷對其進行清潔，可用低濕度抹布
擦拭機身過濾芯放置位的灰塵，待乾燥後放回過濾芯並蓋上蓋板即可；
為保證淨化效果，機器過濾材料可視情況定期更換，專用配件購買可咨詢
客服人員；
清潔產品外觀污漬時，請用柔軟乾淨的抹布將產品擦拭乾淨即可，如需清
楚頑固污漬時，請務必使用溫和中性清潔劑。清潔完成後待表面乾燥再開
機使用。
向上摳動扣位
打開過濾網蓋板
活性炭
過濾網
HEPA
過濾網
13

故障排除
電源線為正確插入電源
不能開機
未開啟電源按鍵/觸控開關
接插好電源插頭
使用了不匹配的適配器
電源線損壞
線路板損壞
聯繫指定維修機構
聯繫指定維修機構
風機內進入異物
產品出現異音
風葉或內殼損壞
聯繫指定維修機構
搖擺結構損壞
聯繫指定維修機構
電機損壞
聯繫指定維修機構
聯繫指定維修機構
遙控器電池電量不足
遙控器操作不靈敏 遙控器使用距離過遠
遙控器電池安裝不正確
遙控器內部損壞 聯繫指定維修機構
聯繫指定維修機構
聯繫指定維修機構搖擺結構損壞
風扇不搖擺 / 搖擺卡頓 搖擺電機損壞
異物卡住轉盤
故障描述 可能原因 處理措施
更換新的遙控器電池
靠近風扇使用
檢查電池正負極是否正確
檢查異物並清除
重新觸控/按選電源按鍵
使用隨機配置的適配器
14