Getac V110 User manual

3 . Notes and Precautions
 DO NOT touch the connectors of the office dock.
 DO NOT attempt to make connections if there is any object between the
computer and the office dock. Doing so could damage the computer and
the office dock.
 DO NOT attempt to move the office dock when it is connected to the
computer.
 If the computer malfunctions while the office dock is connected, turn off
the computer and disconnect the office dock. Connect the AC adapter to
the computer and check to see if the computer operates normally. If the
computer operates normally, the office dock may be malfunctioning.
 DO NOT place metal objects or containers of liquid on top of the office
dock. If metal objects (such as paper clips and coins) or any liquid spills get
inside the office dock, fire or electric shock may result. Immediately unplug
the power cable and remove the computer from the office dock.
 Unplug the power cord and remove the computer from the office dock if
any of the following occurs:
– the office dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the office dock is unusually hot
Continuing to use the office dock while any of the above conditions are
present may result in fire or electric shock.
Rugged Mobile Computing Solutions
V110
OFFICE DOCK
QUICK START GUIDE
56151290000x R00

1 . Introduction
The office dock duplicates most of your computer’s ports and provides extra
ports.
With peripheral devices such as a keyboard, mouse, monitor, and printer all
connected to the office dock, you have a handy work area on your desk.
2 . Installation
1. Align the two bottom notches of V110 with the two square guide pins
on the office dock and put down V110 on the dock.
2. Slide the release latch toward the right so the two rear guide pins
(circled below) fit into the two rear notches of V110.
3. Insert the key to the key lock. Press and then turn the lock to the locked
position.
4. Connect the cables of peripheral devices to the corresponding
connectors on the office dock.
5. Connect the AC adapter to the office dock. The DC-In LED lights up.
See reverse side for notes and precautions.
Docking
Connector
Release Latch
DC-In LED
Guide pin Guide pin
Guide pin Guide pin
USB 2.0 Port x 3
Power Connector
VGA Port LAN (RJ-45) Port
Microphone Connector
RS232 Serial Port x 2
Audio Output Connector
Key lock
USB 3.0 Port
Kensington lock