Gevi GECMD008-U User manual

COFFEE MAKER
INSTRUCTION MANUAL
GECMD008-U
[email protected]

IMPORTANT SAFEGUARDS
Dear Gevi customer
Gevi have focused on creating perfect home appliance for
our customer. In the past years, it took us time, lots of
research and many prototypes to achieve our goal. We
would like to give you a different using experience.
Thanks for purchasing our Gevi products, you could
search from our official website, to learn more products
information.
Please carefully read the following instructions before using
your coffee machine. This will guarantee safe usage of your
appliance and will help avoid the risk of personal injury or
damage to your coffee machine.
Read all instructions.
Do not operate the coffee maker without water.
Make sure that your outlet voltage corresponds to the
voltage stated on the rating label of the coffee maker.
To protect against fire, electric shock and injury to persons
do not immerse cord or plug in water or other liquid.
Close supervision is necessary when your appliance is
operating. Do not let the appliance on the standby state for
a long time. And never allow the children to operate the
appliance.
Unplug from outlet when not in use and before cleaning.
Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner. Please ship the appliance to an authorized
service facility for examination, repair or adjustment.
The use of spare parts which are not recommended by the
1.
2.
3.
4.
5.
6.
7.
8.

SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
appliance manufacturer may result in fire, electric shock or
injury to persons.
Place appliance on flat surface or table, do not let cord hang
over edge of table or counter, or touch hot surface.
Do not place on or near a hot gas or electric burner, or in a
heated oven.
Do not use appliance for other than intended use and place
it in a dry environment.
To disconnect, turn the machine off and remove plug from
wall outlet. Always hold the plug. But never pull the cord.
Some parts of appliance are hot when operated, please do
not touch with hand directly. Use handles or knobs only.
Do not clean container with cleansers, steel wool pads, or
other abrasive material.
Never leave the empty carafe on the keeping warm plate
otherwise the carafe is liable to crack.
Never use the appliance if the carafe shows any signs of
cracks or carafe having a loose or weakened handle. Only
use the carafe with this appliance. Use carefully as the
carafe is very fragile.
9.
10.
11.
12.
13.
14.
15.
16.
NOTES ON THE PLUG:
This appliance has a polarized plug, To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet
only one way, If the plug does not fit fully into the outlet,
reverse the plug, If it still does not fit, contact a qualified
electrician, Do not attempt to modify the plug in any way.
NOTES ON THE CORD:
a) A short power-supply cord (or detached power-supply cord)
is recommed to reduce risks resulting from becoming
entangled in or tripping over a long cord.
b) The marked electrical rating of the detachable
power-supply cord or extension cord should be at least as
great as the electrical rating of the appliance.
c) The longer cord should be arranged so that it will not drape
over the counter top or table top where it can be pulled on by
children or tripped over.

USING YOUR COFFEE MAKER
KNOW YOUR COFFEE MAKER BEFORE FIRST USE
Check that all accessories are complete and the unit is not
damaged. Fill water into water tank to the maximum level on
the water gauge and brew water for several times without
coffee powder, then discard the water. Clean and dry all
detachable parts thoroughly according to the section
“CLEANING AND MAINTENANCE”.
Open the top cover and fill the water tank with cold
drinking water
NOTE: Do not fill water tank with water to exceed max level
as indicated on water gauge.
Place the funnel into funnel holder and make sure the
funnel is assembled in place.
Add proper coffee powder into filter. Usually a cup of coffee
need a level spoon of coffee powder, but you may adjust
according to personal taste.
Insert glass carafe with lid in place onto warming plate
horizontally, ensure center line of carafe aligns with that of
funnel.
1.
2.
3.
4.
Carafe lid
Carafe Handle
Glass Carafe
Keeping warm plate
Power switch
Water tank
Top Cover
Funnel
Filter

CLEANING AND MAINTENANCE
Plug the unit into an outlet.
Press power switch , the indicator in it will be illuminated
and the appliance will begin working.
NOTE: the appliance is designed with a pause-and-serve
feature, if you wish, at any time during brewing cycle, you
can temporarily remove carafe to pour and serve a cup of
hot coffee. The brewing cycle will not be interrupted and no
coffee will drip from the appliance, simply replace glass
carafe onto warming plate to restart the brewing cycle, But
do not remove glass carafe for longer than 30s.
Remove carafe to serve when finish brewing
NOTE: the coffee you get will be less than the water you
have added as some water is absorbed by coffee powder.
CAUTION: When pour coffee, the momentary inclined angle
of carafe shall not be more than 45 degree from the vertical
position, you shall pour the coffee slowly until the carafe is
empty, otherwise the coffee in the carafe will rush to the
bottom of carafe lid, and the coffee will flow out from two
edges of lid !
After brewing, the appliance will automatically switch to
the warming mode, which will continue to keep your coffee
warm until you turn off the appliance. It is suggested that
warming time shall be not more than 1 hour. For an
optimum coffee taste, serve it just after brewing.
5.
6.
7.
8.
Always turn the coffee maker off and unplug the appliance
when not in use.
9.
Clean all detachable parts after each use in hot water.
Wipe external surface of product with a soft, damp cloth to
remove stains.
NOTE: Do not attempt to clean the inside of water tank, as
this will leave a residue of lint and may clog your coffee
maker, simply rinse with cold water periodically.
Water droplets may buildup in the area above the funnel
and drip onto the product base during brewing. To control
the dripping, wipe off the area with a clean, dry cloth after
each use of the product.
Replace all parts and keep for next use.
1.
2.
3.
4.
CAUTION: Be sure to unplug this appliance before cleaning
and let the appliance cool down completely. To protect against
electrical shock, do not immerse cord, plug or unit in water or
liquid.

HINTS FOR GREAT-TASTING COFFEEREMOVING MINERAL DEPOSITS
Fill the tank with water and descaler to the max level as
indicated on water gauge (the scale of water and descaler
is 4:1, the detail refers to the instruction of descaler. Please
use “household descaler”), you may also use the citric acid
instead of the descaler (the one hundred parts of water and
three parts of citric acid).
Insert glass carafe onto the warming plate.
Make sure without coffee powder and funnel are
assembled in place.
Switch on the appliance and allow it to “brew” de-scaling
solution.
After “brew” one-cup solution, switch off the appliance.
Leave the solution stay for 15 minutes and repeat step 3-5.
Switch on the appliance and run off the solution until the
water tank is completely empty.
Rinse by operating the appliance with water at least 3
times.
1.
2.
3.
4.
5.
6.
7.
8.
A clean coffee maker is essential for making great-tasting
coffee. Regularly clean the coffee maker as specified in the
“CLEANING AND MAINTENANCE” section. Always use fresh,
cold water in the coffee maker.
Store unused coffee powder in a cool, dry place. After
opening a package of coffee powder, reseal it tightly and
store it in a refrigerator to maintain its freshness.
For an optimum coffee taste, buy whole coffee beans and
finely grind them just before brewing.
Do not reuse coffee powder since this will greatly reduce the
coffee’ flavor. Reheating coffee is not recommended as
coffee is at its peak flavor immediately after brewing.
Clean the coffee maker when over-extraction causes
oiliness. Small oil droplets on the surface of brewed, black
coffee are due to the extraction of oil from the coffee
powder.
Oiliness may occur more frequently if heavily roasted
coffees are used.
1.
2.
3.
4.
5.
6.
To keep your coffee maker operating efficiently, periodically
you should clean away the mineral deposits left by the water
according to the water quality in your area and the use
frequency, we recommend removing mineral deposits as
follows:

REMOVING MINERAL DEPOSITS
1.
2.
3.
4.
5.
Unplug from the mains.
After each brew is complete and the coffee grounds have
cooled, discard the paper filter. Take out the removable
filter holder, rinse, and wash with soap and warm water. If
using a permanent filter, dump the grounds into the trash
and wash the filter by hand with warm, soapy water or
place on the top rack of the dishwasher.
NOTE: If coffee grounds spill over into the filter holder,
remove the filter holder and rinse it.
We recommend cleaning your carafe with warm, soapy
water, or placing it on the top rack of your dishwasher. If
you want to clean the carafe more thoroughly, we
recommend using a soft foam brush such as the one shown
to the right.
To keep your coffee maker operating efficiently, you should
clean away the mineral deposits left by the water regularly
according to the water quality in your area and the frequency
use the appliance, the detail is as follows:
Fill the water tank with water and descaler to the maximum
level in the gauge of coffee maker (the scale of water and
descaler is 4:1, the detail refers to the instruction of
descaler. Please use “household descaler”, you can use
the citric acid instead of the descaler (the one hundred
parts of water and three parts of citric acid).
Place the carafe on the keeping warm plate, pay attention
to let center line of carage aligns with that of brew basket.
Press the on/auto/off button once and the indicator in it
will be illuminated Blue. After a while, water will drop out
automatically.
After percolate the equivalent of one cup and then switch
off the appliance by pressing the on/auto/off button twice.
The indicator in it will be illuminated blue and will be
extinguished after 15s.
Leave the solution work for 15 minutes, repeat the steps of
CLEANING AND MAINTENANCE
CAUTION: Before performing any cleaning operations, the
machine must be turned off and disconnected from the mains
power supply. Never immerse the coffee machine in water.
1.
2.
3.

7.
6.
coffee are due to the extraction of oil from the coffee
powder.
Oiliness may occur more frequently if heavily roasted
coffees are used.
3-5 again.
Turn the appliance on by pressing the on/auto/off button
once and run off the water until the water tank is completely
empty.
Rinse by operating the appliance with water at least 3 times.
CLEANING AND MAINTENANCE
6.
7.
A clean coffee maker is essential for making great-tasting
coffee. Regularly clean the coffee maker as specified in the
“CLEANING AND MAINTENANCE” section. Always use
fresh, cold water in the coffee maker.
Store unused coffee powder in a cool, dry place. After
opening a package of coffee powder, reseal it tightly and
store it in a refrigerator to maintain its freshness.
For an optimum coffee taste, buy whole coffee beans and
finely grind them just before brewing.
Do not reuse coffee powder since this will greatly reduce
the coffee’ flavor. Reheating coffee is not recommended
as coffee is at its peak flavor immediately after brewing.
Clean the coffee maker when over-extraction causes
oiliness. Small oil droplets on the surface of brewed, black
1.
2.
3.
4.
5.