Gevi GECME400BA-U User manual

COFFEE MAKER
INSTRUCTION MANUAL
GECME400BA-U

CONTENTS
1. WELCOME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. DESCRIPTION OF THE APPLIANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. CORD & PLUG INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 SPECIAL NOTES ON PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 SHORT CORD INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. MAIN OPERATION FUNCTION INSTRUCTION . . . . . . . . . . . . . . . . . . . . .
5.1 BEFORE FIRST USE OR A LONG TIME NOT USE . . . . . . . . . . . . . . . .
5.2 HOW TO MAKE ESPRESSO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.1 THE STEP OF MAKING ESPRESSO . . . . . . . . . . . . . . . . . . . . . .
5.2.2 HOW TO CUSTOMIZE THE AMOUNT OF ESPRESSO. . . . . . .
5.2.2.1 THE STEP OF OPERATION . . . . . . . . . . . . . . . . . . . . . .
5.2.2.2 THE STEP OF RESTORE THE DEFAULT SETTING . . .
5.2.3 TROUBLESHOOTING DURING THE BREWING . . . . . . . . . . . .
5.2.4 HOW TO CLEAN THE SEAL RING. . . . . . . . . . . . . . . . . . . . . . . .
5.2.5 FROTH MILK AFTER BREWING ESPRESSO. . . . . . . . . . . . . . .
5.3 HOW TO MAKE MILK FOAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1 THE STEPS OF MAKING MILK FOAM . . . . . . . . . . . . . . . . . . . . .
5.3.2 HOW TO CLEAN THE STEAM NOZZLE. . . . . . . . . . . . . . . . . . .
5.3.3 BREW ESPRESSO AFTER MILK FROTHING. . . . . . . . . . . . . . .
5.3.4 AUTOMATICALLY POWER-OFF FUNCTION . . . . . . . . . . . . . . .
6. CLEANING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE. . . . . . . . . . . . . . .
6.2 REMOVING MINERAL DEPOSITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. TIPS FOR PERFECT BARISTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6
6
10
10
14
13
13
2
2
3
5
5
15
16
18
18
18
20
21
21
21
21
22
24
24
Thanks for purchasing our Gevi products. Gevi has focused on creati-
ng perfect home appliances for our customers. In the past few years,
it took us time to do lots of research and many prototypes to achieve
our goal. We would like to give you a different user experience. If you
want FAQs and more information, please feel free to contact us.
2
2. DESCRIPTION OF THE APPLIANCE
1. WELCOME
MODEL: GECME400BA-U
Electrical parameters: 120V~ 60Hz 1350W
18
2
5
8
11
12
13
14 17
9
7
6
15
4
16
10
3
1
Description
LED display screen
Single cup button
Double cup button
Coffee/steam knob
selector
Filter holder
Steam valve
Portafilter
ON/OFF Switch
Pressure relief hole
Removable cup shelf
Drip tray
Steam wand
Double-cup filter
Tank cover
Water tank
Spoon & Tamper
Cup warming plate
Single-cup filter
Description DescriptionRe. Re. Re.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

Read these instructions carefully and keep it for future use. If this ap-
pliance is passed to a third party, then these instructions must be
included.
Before using the electrical appliance, some basic precautions should
always be followed including the following:
—1. Read all instructions.
—2. Before using, check the output voltage of the wall outlet should
be correspond to the rated voltage marked on the appliance’s rating
plate.
—3. To protect against fire, electric shock and injury, please do not
immerse cord and plug into water or other liquid.
—4. Unplug from wall outlet before cleaning and when it is not in use.
Allow the appliance to cool down completely before taking off, attac-
hing components or cleaning.
—5. Do not operate the appliance with damaged power cord or plug
after the equipment malfunctions, falls or operates the equipment in
any way causing damage. Return it to the nearest authorized service
for inspection, repair and electrical or mechanical adjustment.
—6. Using accessories not recommended by the manufacturer may
result in fire, electric shock or injury.
—7. Place the appliance on flat surface or table, do not hang power
cord over the edge of table or counter.
—8. Ensure the power cord not touch any hot surface of the appliance.
—9. Do not place the coffee maker on hot surface or beside fire in
order to avoid damage.
—10. To disconnect, turn off all control buttons, then unplug from
wall outlet. When unplug the appliance, always hold the plug and do
not pull the cord directly.
—11. Do not use the device for other purposes than its intended uses
and place it in a dry area.
—12. Close supervision is necessary when your appliance is being
used by or near children.
—13. Be careful not to get burned by the steam.
—14. Do not touch the hot surface of the steam wand ❼ and filter
holder ❺ when boiling directly. Use handle or knobs.
—15. Connect plug to wall outlet before using and turn all buttons off
before the plug being removed from wall outlet.
—16. Relieve pressure through steam wand ❼ before removing port-
afilter ❽.
—17. This appliance is not intended for being used by persons (inclu-
ding children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
—18. Children should be supervised to ensure that they do not play
with the appliance.
—19. This appliance is intended to be used in household and similar
applications such as:
‒ staff kitchen areas in shops, offices and other working environments;
‒ farm houses;
‒ bed and breakfast type environments.
—20. Do not use outdoors.
43

—21. Do not place on or near a hot gas or electric burner, or in a heated
oven.
65
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet in only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified ele-
ctrician. Do not attempt to modify the plug in any way.
a) A short power-supply cord (or detachable power-supply cord) is
provided to reduce the risk of entanglement or tripping over a long
cord.
b) Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord
should be at least as large as the electrical rating of the appliance;
2) The power cord should be arranged so that it will not dangle on
the countertop or desktop, so as not to be pulled by children or trip
over accidentally;
4. CORD & PLUG INSTRUCTION
4.1 SPECIAL NOTES ON PLUG
4.2 SHORT CORD INSTRUCTION
For a better taste and good for your health, we suggest you to rinse the
machine and release the water out.
5. MAIN OPERATION FUNCTION INSTRUCTION
5.1 BEFORE FIRST USE OR A LONG TIME NOT USE
Note: The appliance is supplied with a detachable water
tank ⓰ for easy filling and cleaning, you can fill the water
tank ⓰ firstly, and then put it in the appliance.
（1）Remove the tape on the water tank ⓰
valve.
（2）Fill the water tank ⓰ with clean, room
temperature water. NOT exceed the “MAX”
line.
（3）Close the tank cover ⓯ , and put the
water tank ⓰ on the back of coffee maker.

87
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
Note: Set up the water tank ⓰ vertically and align the buckles
to the hole on the back of the machine, and press it down to be
parallel to the top of the machine.
（4）Fix double-cup filter ⓮ into portafilter
❽ (no coffee powder in portafilter ❽).
（6）Place a cup on removable cup shelf ⓫.
（5）Insert the portafilter ❽ into the app-
liance in the flat position and turn clock-
wise from the “ ”position to the“
”lock position.
(8) Plug in.
(9) Press ON/OFF Switch ❾ to the“ ”
position, the LED display screen ❶ will
flash blue icons, the appliance will start
heating.
(10) When the icons on the LED display
screen ❶ become fixed, the heating is
completed and the appliance pass to
ready condition.
(11) Turn the coffee/steam knob selector
❹ to the espresso function icon .
(12) Press the Double cup button ❸.
(7) Make sure the coffee/steam knob
selector ❹ is in “ 〇 ”position.
x1
x2
x2

109
(13) After a while, water will flow out, and it will stop automatically
when achieve the setting dose.
To make a good Espresso, we recommend that you to preheat all the
parts, like portafilter ❽, single-cup filter ⓭, double-cup filter ⓮ and
your cup, so you can better enjoy the taste flavour of your coffee.
(1) Fill the water tank ⓰ with clean ,
room temperature water. NOT exceed
the “MAX” line. Close the tank cover ⓯ ,
and put the water tank ⓰ on the back
of coffee maker.(If you had operated the
machine just now, skip this step).
(2) Fix corresponding single-cup filter ⓭
/ double-cup filter ⓮ into portafilter ❽ ,
make sure the dot on the filter aligns with
groove in the portafilter ❽ , and add co-
rresponding coffee powder to single-cup
filter ⓭ / double-cup filter ⓮ with the
spoon & tamper ⓱.
(14) Repeat one more time the above
steps of 11~12. Then turn the coffee/
steam knob selector ❹ back t o “ 〇 ”
position.
(16) Move the cup under the steam wand
❼.
(17)Rotate the coffee/steam knob select-
or ❹ to the steam function icon for 10
seconds, there will be water and steam
coming out from the steam wand ❼.
Be careful to the hot steam. Then rotate
the coffee/steam knob selector ❹ back to “ 〇 ”position. Pour away
the water of the cup.
(15) Pour away the water of the cup.
Slowly uninstall the portafilter ❽ in
parallel from the coffee outlet from “
”the position to the “ ”lock
position , then pour the water inside the
portafilter ❽ into drip tray ⓬.
Note: There may be noise when pumping the water on the
first time, it is normal, the appliance is releasing the air inside.
After about 20s, the noise will disappear. We recommend to
release some water before brewing coffee and making milk
foam at the first time or when you don’t use the appliance
for a long time.
5.2 HOW TO MAKE ESPRESSO
5.2.1 THE STEPS OF MAKING ESPRESSO

1211
(3) Insert the portafilter ❽ into the
appliance in the flat position and turn
clockwise from the “ ”position to
the “ ” lock position.
(4) Place corresponding espresso cup on
removable cup shelf ⓫.
(5) Make sure the coffee/steam knob se-
lector ❹ is on “ 〇 ”position.
Note: A spoon of flat coffee powder is approximately equal
to 7g. Collect the coffee powder with the spoon and shake it
gently to make the surface flat, the amount of coffee powder
is around 7g. With one spoon coffee powder (7g) can brew one
cup of Espresso coffee, while two spoons (14g) is two cups of
Espresso coffee. Tamp the coffee powder gently below the the
MAX line of portafilter ❽. Don’t tamped the coffee powder too
firmly.
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
(6) Plug in.
(7) Press ON/OFF Switch ❾ to the “ ”
position, the LED display screen ❶ will
flash blue icons, the appliance will start
heating.
(8) When the icons on the LED display
screen ❶ become fixed, the heating is
completed and the appliance pass to
ready condition.
(9) Turn the coffee/steam knob selector
❹ to the espresso function icon.
(10) Make one cup of espresso: Press
single cup button ❷. After a while, coffee
will flow out, and it will stop automatically
when achieve the setting dose. Then turn
the coffee/steam knob selector ❹ back
to “ 〇 ”position.
x1
x2
x1

1413
(2.1) Customize the amount of single
cup/short dose.
Press single cup button ❷. After get the
desired amount of coffee, press single
cup button ❷ again to stop.
(2.2) Customize the amount of double
cup/long dose.
Press double cup button ❸. After get the
desired amount of coffee, press double
cup button ❸ again to stop.
(3) Save the new setting.
Press single cup button ❷ to save within 15 seconds, the corresp-
onding cup button light will flash two times. Then the machine will
automatically back to ready mode, the icons on the LED display
screen ❶ become fixed, the new settings will be saved.
(4) Don’t save/ exit the settings.
Press the double cup button ❸, the icons on the LED display screen
❶ become fixed. Then the new settings won’t be saved and will be
back to ready mode.
5.2.2 HOW TO CUSTOMIZE THE AMOUNT OF ESPRESSO
5.2.2.1 THE STEP OF OPERATION
5.2.2.2. THE STEP OF RESTORE THE DEFAULT SETTING
(11) Make two cups of espresso: Press
double cup button ❸ . After a while,
coffee will flow out, and it will stop
automatically when achieve the setting
dose. Then turn the coffee/steam knob
selector ❹ back to “ 〇 ”position.
(1) Turn the coffee/steam knob selector
❹ to the espresso function icon, when
the icons on the LED display screen ❶
become fixed, the heating is completed
and the appliance pass to ready condition.
(2) Long press the Single cup button ❷
and Double cup button ❸for 2 seconds
to enter into to the mode of setting the
dispensing amount. The Single cup icon
and Double cup icon will flash.
(12) Your coffee is ready now. Press the
ON/OFF Switch ❾ to the “〇” to switch
off.
Function Operation Picture Light
Restore the single
cup default setti-
ngs
Single cup icon flash
3 times after 2 seco-
nds
1.Turn the coffee/steam
knob selector ❹ to the
espresso function icon
2.Long press single cup
button from the ready
mode
x1
x2
x1
x2
x2
x2
x1
x1

1615
5.2.4 HOW TO CLEAN THE SEAL RING
5.2.3 TROUBLESHOOTING DURING THE BREWING
(1) When the machine starts to work , there will be some noise comes
out from the machine as it is pumping the water with a high pressure.
(2) When you finish making espresso and turn the coffee/steam knob
selector ❹ back to “ 〇 ”position, the pressure relief hole will make a
loud noise. It is because the machine relieving the pressure, which is
normal and not a problem.
(3) To achieve a full flavor, each one cup of espresso should be not
more than 30ml, while two cups of espresso is 60mL.
(4) While during operation , if there is suddenly a loud noise from the
machine, which may due to not enough water in the water tank ⓰ .
In this case, please remove the portafilter ❽ and clean the coffee
powder and don't use the inside coffee powder again. Then continue
to brew coffee from step 1 of 5.2.1 THE STEPS OF MAKING ESPRESSO.
(5) During brewing, when you find the coffee leaks out from outer side
of portafilter ❽ or doesn’t flow smoothly, it have several reasons
as below and you should stop the operation by turn the coffee/steam
knob selector ❹ back to “ 〇 ”position. Remove the portafilter ❽ and
clean the coffee powder and don't use the inside coffee powder again.
Note: (Please mind the hot water and operate carefully)
NOTE: As the seal ring of the water outlet is designed to pre-
vent from leaking, once there is too much coffee powder left,
the seal ring will be blocked. If the seal ring is blocked, it will
lead to the espresso leakage or splash when brewing espresso.
For this reason and for healthier, we suggest you to clean it
every time after use with hot water from the brewing function.
If it is not cleaned in time, it will produce a bad smell.
Function Operation Picture Light
Restore the double
cup default setti-
ngs
After corresponding cup icon flash, the icons on the LED display screen ❶
become fixed, the machine will back to ready mode. The machine is restored
to the default value.
Double cup icon flash
3 times after 2 seco-
nds 1.There is some coffee powder on
the edge of portafilter ❽.
Clean coffee powder on the edge
of the portafilter ❽.
2. The portafilter ❽ is not installed
properly. Re-install the portafilter ❽ correctly.
3. The coffee powder is too fine. Do not use coffee powder that is too
fine.
4. The coffee powder on the porta-
filter ❽ is pressed too tightly.
Press the coffee powder lightly to
the max line.
5. The two outlet holes of the port-
afilter ❽ is blocked.
Remove the filter and clean the two
outlet holes under the portafilter ❽.
6. The holes of the filter is blocked. Soak the filter in clean water for about
half an hour, then clean it with a brush.
1.Turn the coffee/steam
knob selector ❹ to the
espresso function icon
2.Long press double
cup button from the
ready mode
Possible Cause Solution
x2

1817
5.2.5 FROTH MILK AFTER BREWING ESPRESSO
After making the espresso through the steps above (5.2.1 THE STEPS
OF MAKING ESPRESSO), you can continue to froth milk, please refer
to the following steps (5.3 HOW TO MAKE MILK FOAM).
For a better taste and good for your health, we suggest you to rinse
the pitcher and release some water out from the steam wand ❼.
(1) Uninstall the portafilter ⓬ in parallel
from the coffee outlet from the “ ”
position to the “ ”lock position ,
then put it down. Pour away the coffee
powder.
(2) Turn the coffee/steam knob selector
❹ to the espresso function icon.
(3) Press any button. (Single cup button
❷ or Double cup button ❸) The water
will come out and flush out the coffee
powder inside.
(1) Fill the water tank ⓰ with clean, room
temperature water. NOT exceed the “MAX”
line. Close the tank cover ⓯ , and put the
water tank ⓰ on the back of coffee maker.
(If you had operated the machine just now,
skip this step) .
(2) Plug in.
(3) Press ON/OFF Switch ❾ to the “ ”
position, the LED display screen ❶ will
flash blue icons, the appliance will start
heating.
(4) Turn the coffee/steam knob selector
❹ back to “ 〇 ”position.
(5) Rinse the seal ring of the water outlet
with cloth.
5.3 HOW TO MAKE MILK FOAM
5.3.1 THE STEPS OF MAKING MILK FOAM
x1
x2

2019
(5) Prepare a pitcher with about 100mL of milk. We recommend to use
whole milk about 41-45℉. Take the pitcher with the milk and insert
steam wand ❼ into the milk.
(4) When the icons on the LED display
screen ❶ become fixed, the heating is
completed and the appliance pass to
ready condition.
(6) Rotate the coffee/steam knob selector
❹ to steam function icon , steam will
come out from the steam wand ❼.
(7) Froth milk by moving vessel round
from up to down.
(8) After the milk increase in volume by
two times or your required purpose is re-
ached, you can turn the coffee/steam knob
selector back to “ 〇 ”position.
(9) Take away the pitcher. Your milk foam
is ready now.
Note: 1.When you finish milk frothi-
ng and turn the coffee/steam knob
selector ❹ back to “ 〇 ”position, the
pressure relief hole ❿ will make a loud
noise. It is because the machine relie-
ving the pressure, which is normal and not a problem.
2.During the milk frothing, if there is suddenly a noise and coming
out with small steam. Please check if there is enough water in the
water tank ⓰ and add water in time. When the water left the water
tank is going to finish, it will produce a louder noise. After adding
water, it will operate as usual.
1. To avoid blocking the steam wand
❼, we suggest to clean the steam wand
❼ immediately after finish frothing
milk. When the screen stop flashing,
rotate the coffee/steam knob selector
5.3.2 HOW TO CLEAN THE STEAM NOZZLE
Note: (Please mind the hot water and operate carefully)
x1
x2

2221
2. Press and hold the steam wand ❼,
pull out the steam wand ❼. Clean the
steam wand ❼ with wet sponge.
❹ to steam function icon . If the steam is weak, check whether
the hole of the steam wand ❼ is blocked. If it is not cleaned in
time, it will produce a bad smell. You can use a cleaning pin to
clean and unblock the steam pipeline.
1. A clean coffee maker is essential for making great-taste coffee.
Clean all the accessories each time and clean the coffee maker’s
water scale regularly as specified in the “REMOVING MINERAL
DEPOSITS” section.
2. Clean the seal ring of the filter holder ❺ each time immediat-
ely with hot water using the brewing function after making coffee.
3. Clean the steam wand ❼ each time immediately with hot steam
using the steam function after finish frothing milk.
Note: Do not use detergent or stainless steel scrubber/brush to
clean the portafilter ❽, because the surface of the portafilter ❽
is coated, and the detergent/brush will accelerate the oxidation
of the portafilter ❽ surface. Therefore, we recommend cleaning
the portafilter ❽ with just water and rag.
5.3.3 BREW ESPRESSO AFTER MILK FROTHING
5.3.4 AUTOMATICALLY POWER-OFF FUNCTION
CAUTION: Be sure to unplug this appliance before cleaning
and let the appliance cool down completely. To protect against
electrical shock, do not immerse cord, plug or unit in water or
liquid.
After making the milk foam through the steps above (5.3.1 THE STEPS
OF MAKING MILK FOAM), the machine will relieve the pressure auto-
matically, then you can continue to make espresso.
To make sure your coffee maker operate efficiently, internal pipe clean
and the peak flavor of coffee, it is necessary to clean the coffee maker’s
water scale periodically.
After brewing coffee or frothing milk, if there is no any operation within
15 minutes, the appliance will power off automatically.
6. CLEAN AND MAINTENANCE
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE
6.2 REMOVING MINERAL DEPOSITS
(1) We strongly recommend you to use the
citric acid (The rate of citric acid and water
is 1:100). To confirm descaling, fill the water
tank ⓰ with citric acid under the MAX level.

2423
(7) Left the citric acid stay in the appliance at least 15 minutes at the
first time.Repeat the step from 3-6 for three times then the descaling
is finished. After finish that, clean the parts (water tank ⓰, steam wand
❼ , seal ring of the filter holder ❺). Brew with clean water in the MAX
level, repeat steps 3-6 for 1 time around 200mL, then brew until no
water is left in water tank ⓰ before making coffee.
(1) Always use clean, room temperature water in the coffee maker.
(2) For an optimum coffee taste, buy whole coffee beans and finely
grind them just before brewing.
(3) Grind the bean every time before brew espresso in case you ever
used coffee powder. You must keep the unused coffee powder in a
cool, dry place.
(4) Do not reuse coffee powder since this will greatly reduce the cof-
fee’s flavor. Reheating coffee is not recommended as coffee is at its
peak flavor immediately after brewing.
7.TIPS FOR PERFECT BARISTA
8. TROUBLE SHOOTING
(3) When the icons on the LED display
screen ❶ is fixed, turn the espresso/steam
knob selector ❹ to espresso function icon.
(2) Put the cup on the removable cup shelf
⓫ .
(4) Press the double cup button ❸to brew
hot water and repeat 3~4 times. Then turn
the coffee/steam knob selector ❹ back to
“ 〇 ”position.
(5) Move the cup under the steam wand ❼.
(6) Turn the coffee/steam knob selector ❹
to the steam function icon to release citric
acid mix. At that moment, the steam wand
❼ will flow out citric acid until you turn the
coffee/steam knob selector ❹ back to “ 〇 ”
position to stop.
1. There is much water in the
drip tray ⓮.
Water leaks from
the bottom of
coffee maker. Please clean the drip tray ⓮.
Problem Possible Cause Solution
x2

2625
2. When the water tank ⓰ is
pulled up after use, it is nor-
mal that there will be water
left on the desk.
3. The sealing ring of the wa-
ter inlet hole of the machine
base is deformed.
4. Malfunction of the coffee
maker.
1. No proper clean after cle-
aning the mineral deposits.
2. Coffee powder is stored in
a hot and humid place for a
long time. The coffee powder
turns bad.
Please contact with the aut-
horized service facility for
assistance.
Please contact with the aut-
horized service facility for
assistance.
Clean the coffee maker per
the instructions “BEFORE
FIRST USE OR A LONG TIME
NOT USE ” for several times.
Keep the unused coffee
powder in a cool, dry place.
After opening a package of
coffee powder, reseal it tightly
and store it in a refrigerator to
maintain its freshness.
Acid (vinegar)
taste exists in
Espresso cof-
fee.
As the water outlet at the b-
ottom of the water tank ⓰
is a movable part and it is
Not leaking. If there is water
left on the water outlet at
the bottom of the water tank
⓰, please clean all the water
around the water outlet with
a dry rag before put the water
tank ⓰ on the back of coffee
maker again.
The power outlet is not plu-
gged well.
The coffee maker
cannot work.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not work,
please contact with the aut-
horized service facility for
assistance.
The hole of the froth nozzle
is blocked.
1. The heating indicator ❸ is
not illuminated.
No steam comes
out when make
milk froth.
Can't make milk
froth.
The coffee maker
make weak coffee
Use a cleaning pin to insert
the hole of the froth nozzle
to clean and unblock the
steam pipeline.
Only after the heating indi-
cator ❸ is illuminated, the
steam can be used to froth.
2. The temperature of the
milk is inappropriate.
The milk temperature is
about 41-45℉.
6. There is some dirt inside
the steam wand ⓫ .
1.The coffee bean is inappro-
priate. Use blend coffee bean.
2. The grounds particle size
is coarse. Use fine grounds.
Clean the Steam wand ⓫
immediately after use every
time with wet sponge.
4. The quantity of milk is
inappropriate.
Use 100mL milk for each
frothing.
5. The size of pitcher is inap-
propriate. Using correct size pitcher.
3. Use skim milk. Use whole milk or semi-
skimmed milk.
3. The grounds amount is
inappropriate.
A spoon of flat coffee powder
is approximately equal to 7g.
Collect the coffee powder
with the spoon and shake it
gently to make the surface
flat, the amount of coffee
powder is around 7g. With
one spoon coffee powder
( 7g ) can brew one cup of
top-grade coffee, while two
spoons (14g) is two cups of
top-grade coffee.
Problem Possible Cause Solution
Problem Possible Cause Solution

4. The grounds tamping
process is inappropriate.
5. The heating indicator ❸ is
not illuminated.
6. The Espresso amount is
inappropriate.
Tamp light and below the
Max line of double-cup filter
❾.
Only after the heating indic-
ator ❸ is illuminated, the
machine can be used to
making Espresso.
30mL per cup.
Do not take apart the appliance by yourself if the cause of failure is
not found, it’s better to contact certified serving center.
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or hu-
man health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of mat-
erial resources. To return your used device, please use
the return and collection systems or contact the retailer
where the product was purchased. They can take this
product for environmental safe recycling.
Correct Disposal of this product
2827
Problem Possible Cause Solution