Gevi GECME418E-U User manual

COFFEE MAKER
INSTRUCTION MANUAL
GECME418E-U
CONTENTS

CONTENTS
4
5
5
8
8
11
12
1
1
2
4
4
15
20
21
22
22
24
23
24
26
29
33
34
WELCOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE APPLIANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFEGUARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CORD & PLUG INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- SPECIAL NOTES ON PLUG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- SHORT CORD INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAIN OPERATION FUNCTION INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . .
- BEFORE FIRST USE OR A LONG TIME NOT USE. . . . . . . . . . . . . . . . . . . . . .
- HOW TO MAKE ESPRESSO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• HOW TO MAKE ONE CUP/TWO CUPS OF ESPRESSO. . . . . . . . . . . . .
• PRESSURE GAUGE PROBLEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• HOW TO CUSTOMIZE THE AMOUNT OF ESPRESSO. . . . . . . . . . . . . .
- HOW TO MAKE MILK FOAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- MAKE ESPRESSO IMMEDIATELY AFTER FROTHING MILK. . . . . . . . . . . . .
- MAKE HOT WATER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OTHER FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- AUTOMATIC SLEEP MODE FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- WATER SHORTAGE MODE FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CARE & CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-CLEANING ACCESSORIES & REMOVABLE PARTS. . . . . . . . . . . . . . . . . . . . .
-CLEANING THE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCALING CYCLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIPS FOR PERFECT BARISTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Read these instructions carefully and keep it for future use. If this ap-
pliance is passed to a third party, then these instructions must be
included.
Before using the electrical appliance, some basic precautions should
always be followed including the following:
—1. Read all instructions.
—2. Before using, check the output voltage of the wall outlet should
be correspond to the rated voltage marked on the appliance’s rating
plate.
—3. To protect against fire, electric shock and injury, please do not
immerse cord and plug into water or other liquid.
—4. Unplug from wall outlet before cleaning and when it is not in use.
Allow the appliance to cool down completely before taking off, attac-
hing components or cleaning.
—5. Do not operate the appliance with damaged power cord or plug
after the equipment malfunctions, falls or operates the equipment in
any way causing damage. Return it to the nearest authorized service
for inspection, repair and electrical or mechanical adjustment.
—6. Using accessories not recommended by the manufacturer may
result in fire, electric shock or injury.
—7. Place the appliance on flat surface or table, do not hang power
cord over the edge of table or counter.
—8. Ensure the power cord not touch any hot surface of the appliance.
—9. Do not place the coffee maker on hot surface or beside fire in
order to avoid damage.
21
Thanks for purchasing our Gevi products. Gevi has focused on creati-
ng perfect home appliances for our customers. In the past few years,
it took us time to do lots of research and many prototypes to achieve
our goal. We would like to give you a different user experience. If you
want FAQs and more information, please feel free to contact us.
Description
Power button
Steam button
Single-cup filter
Portafilter
Water tank
Steam wand
Spoon & Tamper
Cup warming plate
Double-cup filter
Tank cover
Steam/water knob
Froth nozzle
Pressure Gauge
Filter holder
Tank handle
Steam valve
Removable cup shelf
Single/short cup button Double/long cup button
Description DescriptionRe. Re. Re.
1
4
7
10
13
16
19
2
5
8
11
11
12
13
14
19
5
1 2 3 4
15
16
17
9
8
7
14
17
3
6
9
12
15
18
18
6
Electrical parameters: 120V~ 60Hz 1350W
10
WELCOME
DESCRIPTION OF THE APPLIANCE
IMPORTANT SAFEGUARDS

—21. Do not place on or near a hot gas or electric burner, or in a heat-
ed oven.
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet in only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified elec-
trician. Do not attempt to modify the plug in any way.
a) A short power-supply cord (or detachable power-supply cord) is
provided to reduce the risk of entanglement or tripping over a long
cord.
b) Longer detachable power-supply cords or extension cords are av-
ailable and may be used if care is exercised in their use.
c) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord sh-
ould be at least as large as the electrical rating of the appliance;
2) The power cord should be arranged so that it will not dangle on
the countertop or desktop, so as not to be pulled by children or
43
—10. To disconnect, turn off all control buttons, then unplug from
wall outlet. When unplug the appliance, always hold the plug and do
not pull the cord directly.
—11. Do not use the device for other purposes than its intended uses
and place it in a dry area.
—12. Close supervision is necessary when your appliance is being
used by or near children.
—13. Be careful not to get burned by the steam.
—14. Do not touch the hot surface of the steam wand ⓰ and filter
holder ❾ when boiling directly. Use handle or knobs.
—15. Connect plug to wall outlet before using and turn all buttons off
before the plug being removed from wall outlet.
—16. Relieve pressure through steam wand ⓰ before removing port-
afilter ❿.
—17. This appliance is not intended for being used by persons (inclu-
ding children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
—18. Children should be supervised to ensure that they do not play
with the appliance.
—19. This appliance is intended to be used in household and similar
applications such as:
staff kitchen areas in shops, offices and other working environments;
farm houses;
bed and breakfast type environments.
—20. Do not use outdoors.
CORD & PLUG INSTRUCTION
SPECIAL NOTES ON PLUG
SHORT CORD INSTRUCTION

（4）Fix filter into portafilter ❿ (no coffee
powder in portafilter ❿).
（3）Close the tank cover ⓫, and put the
water tank ⓭ on the back of coffee maker.
（5）Place a cup on Removable cup shelf
⓲.
（6）Make sure the steam/water knob ⓮ is
in a horizontal position (off-position).
Note: The appliance is not equipped with any jug, please use
your jug or coffee cup.
Note: Set up the water tank vertically and align the buckles to
the hole on the back of the machine, and press it down to be pa-
rallel to the top of the machine.
65
trip over accidentally;
3) If the electrical appliance is grounded type, the extension cord
should be a grounded type 3-core wire;
（1）Remove the tape on the water tank ⓭
valve.
（2） Fill the water tank ⓭ with clean, room
temperature water. NOT exceed the “MAX”
line.
For a better taste and good for your health, we suggest you to rinse
the machine and release the water out.
Note: The appliance is supplied with a detachable water tank
⓭ for easy filling and cleaning, you can fill the water tank ⓭ firstly,
and then put it in the appliance.
MAID OPERATION FUNCTION INSTRUCTION
BEFORE FIRST USE OR A LONG TIME NOT USE

（1） Fix corresponding single-cup filter ❼/
double-cup filter ❽ into portafilter ❿ ,
make sure the dot on the filter aligns with
groove in the portafilter ❿, and add corre-
sponding coffee powder to single-cup filter
❼/ double-cup filter ❽ with the spoon &
tamper ⓳.
（2）Insert the portafilter ❿ into the applia-
nce in the flat position and turning anti-
clockwise from the “INSERT” position to “
Lock” position.
Note: A spoon of flat coffee powder is approximately equal to
7g. Collect the coffee powder with the spoon and shake it gently
to make the surface flat, the amount of coffee powder is around
7g. One spoon coffee powder (7g) can make one cup of top-grade
coffee, while two spoons (14g) is two cups of top-grade coffee.
Tamp the coffee powder gently below the the MAX line of port-
afilter ❿ . Don’t tamped the coffee powder too firmly.
To make a good Espresso, we recommend you to preheat all the parts,
like portafilter ❿, single-cup filter ❼, double-cup filter ❽ and your
cup, so you can better enjoy the taste flavour of your coffee.
87
HOW TO MAKE ONE CUP/TWO CUPS OF ESPRESSO
Note: There may be noise when pumping the water on the first
time, it is normal, the appliance is releasing the air inside. After
about 20s, the noise will disappear.
I t ’s also recommended to release some water before brewing
coffee at the first time or when you don’t use the appliance for
a long time.
（7）Plug in.
（8）Press the power button ❶. The power
button ❶ start to blink blue light slowly,
other buttons do not light up. The applia-
nce will start heating.
（9）When single cup button ❷, double cup
button ❸ and steam button ❹ switch on
(power button ❶ stop to blink) and the ap-
pliance pass to ready condition.
（10）Press double cup button ❸, wait for a
moment, the water will flow out.
HOW TO MAKE ESPRESSO

（3）Place corresponding espresso cup on
cup shelf ⓲.
（4）Make sure the steam/water knob ⓮ is
in a horizontal position (off-position).
（5）Plug in.
(6) Press the power button ❶. The power
button ❶ start to blink blue light slowly,
other buttons do not light up. The applia-
nce will start heating.
Note: The appliance is not equipped
with any jug, please use your jug or cof-
fee cup.
（7）When 4 button’s light keep blue fixed,
the appliance pass to ready condition.
(8)Make one cup of espresso: Press single
cup button ❷, the single cup button ❷
will blink white light slowly. After a while,
coffee will flow out.
(9) Make two cups of espresso: Press dou-
ble cup button ❸, the double cup button
❸ will blink white light slowly. After a
while, coffee will flow out.
(10) The appliance will automatically stop
working when the coffee-brewing is finished.
Your coffee is ready now. All 4 button’s light
keep blue fixed, you can operate other
functions.
109
Safety advise: If during the coffee
brew, you rotate the steam/water knob
⓮ in the on position, the appliance will
stop to brew but from the steam wand
⓰ will flow hot water. Must remember
not to do this because the hot water can
burn you or people around you.

（1）You can customize the amount of single cup/short dose according
to your own needs from 25mL to 60mL.
（2）You can customize the amount of double cup/long dose according
to your own needs from 60mL to 130mL.
1211
HOW TO CUSTOMIZE THE AMOUNT OF ESPRESSO
Within Espresso Range
• Flow starts after 4-7 secs
• Flow slow like warm honey
• Crema is golden brown with
a fine mousse texture
• Espresso is dark brown
• Extraction takes 25-35 secs
• Flows starts after 3-5 secs
• Flow fast like water
• Crema is thin and pale
• Espresso is pale brown
• Tastes bitter/sharp, weak
and watery
• Extraction takes up to 20
secs
• The coffee powder is too less.
• The coffee powder is not
pressed tightly enough.
• Flow starts after 8 secs
• Flow drips or not at all
• Crema is dark and spotty
• Espresso is very dark brown
• Tastes bitter and burnt
• Extraction takes more than
40 secs
• The water outlet of the ma-
chine is blocked with coffee
powder.
Under Espresso Range Over Espresso Range
CORRECT EXTRACTION UNDER EXTRACTION OVER EXTRACTION
AFTER EXTRACTION SOLUTIONS
Remove used grinds:
• Used grinds will form a co-
ffee 'puck'.
Adjust & re-test:
• Grind size finer.
Please do not use coffee
powder that is too coarse.
Please remove and clean
the filter.
Adjust & re-test:
• Grind size coarser.
Please do not use coffee
powder that is too fine.
Please remove and clean
the filter.
SOLUTIONS
AFTER EXTRACTION SOLUTIONS
• Rinse filter basket, keep
the filter basket clean to
prevent blockages. When
there is no ground coffee
in the filter basket, lock
the Portafilter ㊵ into the
machine and run hot water
through.
• Increase grind amount.
• Tamp using 30‒40lbs of
pressure. The top edge of
metal cap on the tamper
should be level with the
top of the filter basket
AFTER tamping.
• Decrease grind amount.
• Tamp using 15 kilos of
pressure. The top edge of
metal cap on the tamper
should be level with the
top of the filter basket
AFTER tamping.
ALWAYS TAMP TO LINE
SOLUTIONS
ALWAYS TAMP TO LINE
PRESSURE GAUGE PROBLEM

(1) When the appliance’s heating is finish-
ed (power button ❶ stop to blink, other 3
buttons keep blue light fixed).
(2) Hold and press together the single cup
button ❷ and double cup button ❸ for 3
seconds to enter into the mode of setting
the dispensing amount.
(3)The single cup button ❷ and double cup
button ❸ start to blink blue light quickly,
the power button ❶ keeps blue light fixed,
the steam button ❹ do not light up.
(4.1)Customize the amount of single cup/
short dose.
Press the single cup button ❷; After get the
desired amount of coffee, press single cup
button ❷ again to stop.
(4.2)Customize the amount of double cup/
long dose.
Press the double cup button❸, and follow
the same procedures of (4.1)Customize the
amount of single cup brew.
1413
(5.1) Save the new setting.
Press the steam button ❹ within 15 seconds,
the power button ❶ will blink blue light
slowly for 3 times and the machine will have
3 beeps. Then the machine will automatically
back to ready mode, all the buttons will keep blue light fixed, the new
settings will be saved.
(5.2) Back to the ready without save.
Press the power button ❶ within 15 seconds.
The machine will beep for one time and be
back to ready mode without saving the new
settings.
OPERATION STEPS
5 beeps
5 beeps
5 beeps
Beep
1.Hold and press tog-
ether the power button
❶ and single cup butt-
on ❷ for 3 seconds
1.Hold and press tog-
ether the power button
❶ and double cup butt-
on ❸ for 3 seconds
1.Hold and press toge-
ther the power button
❶ , single cup button
❷ and double cup butt-
on ❸ for 3 seconds
restore the single cup
default settings
restore the double cup
default settings
restore the single cup
and double cup defa-
ult settings simultan-
eously
After 5 seconds, all the button will keep blue light fixed, the machine will back to ready mode.
The machine is restored to the default value.
Function Operation Light
RESTORE THE DEFAULT SETTING STEPS

1615
Milk that has been textured correctly has a thick, rich microfoam with a
silky sheen. Texturing involves both heating and aerating milk using
steam. Vital elements include positioning of the Steam wand ⓰ ,when to
adjust the Milk Jug position and reaching the correct temperature. Use
the below steps to help you create café-style microfoam.
For a better result, we suggest you, every time before starting the frothing,
to release some water out from the Steam wand ⓰ and rinse the Pitcher.
Press the steam button ❹ from the ready
mode, and it starts to blink white light slowly.
The steam button ❹ stops blinking and keeps
white light fixed. It means the heating for
steam is finished.
Note:For a better taste and your good health, we suggest you
rinse the pitcher and release some water out from the Steam wa-
nd ⓰ .
OPERATION STEPS
ⒶTurn on the steam/water knob ⓮ to the
“ ” position for 10 seconds and there
will be water coming out from the froth
nozzle⓱ . Be careful of the hot steam.
Then turn the steam/water knob ⓮ to the
“ ”position fully, steam will come out
from the Froth nozzle ⓱.
Note: The volume of milk will increase or ’stretch’ during tex-
turing, so don’t overfill the pitcher.
HOW TO MAKE MILK FOAM
ⒷTurn the steam/water knob ⓮ to horizo-
ntal position(off-position). Pour away the
water in the pitcher.
Fill milk pitcher：
Add 100-150mL of cold milk around 4°C(40
℉) into a chilled clean stainless steel pitc-
her. Fill to the bottom of the pitcher spout.
Steam Warm Up：

18
17
Barista Tip: Milk Temperature
• Under: If not heated long enough, it will
be warm with little texture.
• Optimum: See below table.
• Over: If heated for too long it will start to
boil around 72°C and will have a burnt
taste with all texture lost.
Correct Temperature：
An indication of reaching correct milk temperature is when the pitcher
base can only be touched comfortably for approximately 3 seconds.
MILK TEMPERATURE
Full & Skim 60-65°C
55-65°C
65-70°C
55-60°CSoy
Almond
Coconut
Position：
Place the Steam wand ⓰ Arm in the
pitcher spout at the 12 o'clock position,
with the Froth nozzle ⓱ in the milk at the
3 o'clock position, a finger width away
from the edge of the pitcher. Keep the
Froth nozzle ⓱ just under the surface of
the milk. Turn steam/water knob ⓮ back
to STEAM position to start texturing. A
whirlpool action should be created in the
pitcher.
Sound：
How air is introduced to the milk determines the consistency of the
foam. If large gulps of air are added to the milk, the foam will have
large bubbles. Introducing air to the milk in a controlled, gentle
fashion indicated by a gentle hissing sound, will ensure the milk has
fine aerated microfoam.
Barista Tip: Milk Texturing Sounds
• Gurgling: Froth nozzle ⓱ not deep enough, raise pitcher.
• Smooth Hissing: Just right for latte.
• Screeching: Froth nozzle ⓱ too deep, lower pitcher.
Amount of Foam：
Create the amount of microfoam you want. Cappuccinos traditionally
have more microfoam than flat whites.
Note:Some adjustments to technique will be required when
using non-dairy milk.
Keeping Froth nozzle ⓱ Position ：
As the steam heats & textures the milk, the
milk will stretch causing the level of the
milk in the pitcher to rise. As this happens
follow the level of the milk by lowering the
pitcher, keeping the Froth nozzle ⓱ just
below the surface.
Immerse Froth nozzle ⓱：
After creating the desired amount of foam,
immerse the Steam wand ⓰ half depth
way into the milk. This heats all the milk
and pulls in milk instead of air. This ensures
the milk & foam are blended together, ma-
king it denser & smoother.

2019
Wipe Steam wand ⓰ ：
Wipe the Steam wand ⓰ Arm & froth nozzle
⓱ with a clean damp cloth to remove any m-
ilk residue.
Tap & Swirl the Pitcher ：
Gently tapping the Pitcher on the benchtop
helps to release larger trapped air bubbles.
Swirling helps the milk & froth to combine for
an even consistency & a silky appearance.
（1）After making the froth milk through the
steps above, if you want to continue to
brew coffee, by press the single cup button
❷ or double cup button ❸.
（2）You will find the high-temperature status.
Then the appliance will show you the single
cup button ❷ and double cup button ❸
are blinking blue light quickly, and the
power button ❶ is blinking red light quickly
It is necessary to cool down the machine
firstly. Then we could continue to brew
espresso.
Note:Above recommendations might vary from one milk
brand to another and depending on your taste preference.
Note:If steam function is being used for more than 5 minutes,
the Power button ❶ blinks red light quickly, and the steam butt-
on ❹ blinks white light quickly. Thus, reset steam/water knob
⓮ to horizontal position (off-position) to stop it.
After the milk increase in volume by two
times or your required purpose is reach-
ed, you can turn the steam/water knob ⓮
to horizontal position(off-position). The
Single/short cup button ❷ and Double/l-
ong cup button ❸ do not light up. Beca-
use the appliance is in steam function, if
you want to go to standby mode, press st-
eam button ❹ , Single/short cup button
❷ or Double/long cup button ❸ to exit.
Press the Power button❶ , the appliance
has no any response.
MAKE ESPRESSO IMMEDIATELY AFTER FROTHING MILK
Purging the Steam wand ：
The Finishing Touches：
Pour from the Milk Pitcher into your cup in one steady motion.
Note:If there is no operation after 5 minutes, the appliance
will pass to sleep mode.

2221
（3）Until you reach the desired amount of
hot water, then turn the steam/water knob
⓮ to horizontal position (off-position).
All buttons will keep blue light fixed. The
appliance will be back to ready condition.
（1）If there is no any operation after 5 m-
inutes, the appliance will beep for a while
and all button’s light will be turned off
and the appliance will pass to sleep mode.
（2）To reactivate the appliance, press power
button ❶, the power button ❶ start to blink
blue light slowly, other buttons do not light
up.
（3）When 4 button’s light keep blue fixed,
then the heating is finished and the appli-
ance come into ready condition. Long press
the power button ❶ for 2 seconds, the
appliance will switch off.
（1）When the appliance is ready, put a cup
under the froth nozzle ⓱, turn the steam/
water knob ⓮ to “ ”.
（2）The single cup button ❷ and double cup
button ❸ will flash blue light slowly, then
the hot water will dispense from froth nozzle
⓱.
（3） Place a cup under the froth nozzle ⓱ .
Turn the steam/water knob ⓮ to the steam
“ ” position to release water out and
make the appliance to cool down. Wait until
4 buttons switch on and blue light fixed. After
that, turn the steam / water knob ⓮ to
horizontal position (off-position). Now, the
appliance is ready to brew coffee.
OTHER FUNCTION
AUTOMATIC SLEEP MODE FUNCTION
MAKE HOT WATER

2423
Note: Due to the water shortage in the portafilter ❿, the
appliance will have high temperature and high pressure, so
we recommend you to follow the two steps:
Firstly, remove the portafilter ❿ and clean the coffee powder
and don't use the same coffee powder again.
Secondly, put a cup under the steam wand ⓰ . Turn the steam
/water knob ⓮ and brew some water to refill the inner boiler.
After that, the appliance is ready to use again.
Note:After you make the milk foam, if there is no operation
after 5 minutes, the appliance will pass to sleep mode. All but-
ton’s light will be turned off. Press the power button ❶ , the
appliance will pass to ready condition without warm up and
all the lights switch on. Because the appliance’s temperature
is too high. And it is not suitable to make coffee. In this case,
please refer to the section of “HOW TO MAKE ESPRESSO IM-
MEDIATELY AFTER FROTHING MILK” to lower the inner the
temperature down.
（1） During the brew function, if the water tank
⓭ is out of water, the appliance’s 4 buttons
light (power button ❶, single cup button ❷ ,
double cup button ❸, steam button ❹) will
blink blue light together and the appliance
will automatically stop to brew.
（2）Press any button to stop the water
shortage alarm. Then refill the water tank ⓭
with clean water immediately. All button’s
light will keep blue light fixed.
Note:Do not use alkaline cleaning agents, abrasives or metals
courers, as these will scratch the surfaces of parts.
The espresso making process involves extracting oils out of ground
coffee. Deposits of grinds & oils build up over time, affecting the taste of
the coffee & operation of the appliance.
Purging water through the filter holder & Steam Wand, before & after
making each coffee, is the easiest way to keep your appliance clean.
CARE & CLEANING
- CLEANING ACCESSORIES & REMOVABLE PARTS
WATER SHORTAGE MODE FUNCTION
— Clean parts in warm water with a mild detergent, rinse & dry.
Dishwasher Safe parts:
√ Stainless Steel Removable cup shelf
√Stainless Steel Single—cup filter ❼
√ Stainless Steel Double—cup filter ❽
NON Dishwasher Safe parts:
√ Water tank ⓭
√ Portafilter ❿

2625
Cleaning Filter Baskets
• 2—3 Months
1. Soak the Filter Baskets overnight in the
Milk Pitcher with warm water.
2. In the morning rinse the Pitcher & Filter
Basket (s) under running water ensuring all
traces of the cleaning tablet have been
removed.
Cleaning Cup warming tray & Exterior
• When Required
Wipe over the appliance with a soft damp cloth with a mild detergent and
wipe dry.
CAUTION: To prevent damage to the appliance, do not use alkaline
cleaning agents, abrasives or metal scourers.
CAUTION: Do not immerse the appliance in water.
Filter holder Silicone Seal
√ Drip tray
√Spoon & Tamper ⓳
Cleaning Drip Tray
• When Required
Empty if the red Water Level Indicator appears through the Stainless
Steel Grill, otherwise water will overflow.
Note:Over time it is normal for the inside of the Drip Tray to be
stained by the oils in the coffee grinds.
• Weekly
Clean in warm water with a mild detergent, rinse & dry.
Cleaning Portafilter & Filter Basket
• Every Time
Wash after each use by rinsing them with warm water under the tap.
• Regular Intervals
In warm soapy water using a mild detergent, rinse & dry.
3. Place a Filter Basket into Portafilter [without coffee grinds] and insert i-
nto filter holder.
4. Press Double/long cup button ❸ when the appliance pass to ready co-
ndition.
5. Wait for a moment, Allow water to run through until it stops.
- CLEANING THE MACHINE
— A silicone seal is located in the filter holder ❾ and creates a seal against
the Filter Basket when making an espresso.
Note:Clean the seal ring of the filter holder ❾ each time im-
mediately with hot water using the brewing function after making
coffee.
Important: When the appliance is not being used, we recommend that you
don’t leave the Portafilter inserted into the filter holder, as this will reduce
the life of the silicone seal.

2827
STEAM
INSERT
Steam wand Remains Blocked
1. Unscrew the Froth nozzle and soak overnight in
the Milk Pitcher with warm water & one Espresso
Machine Cleaning Tablet.
2. In the morning rinse the Pitcher & Froth nozzle
under running water ensuring all traces of the
cleaning tablet have been removed.
3. Use the thicker 'Steam' Cleaning needle to clean
the Froth nozzle.
4. Ensure transparent O—ring is present &
undamaged.
5. Screw the Froth nozzle back into the Steam
wand ⓰ Arm.
6. Run Hot Water through the Steam wand ⓰ for
40 seconds.
Cleaning Steam Wand
• Every Time
1. After frothing milk, purge the Steam wand ⓰ by
turning the steam/water knob ⓮ to " " for just
1—2 seconds.
2. Wipe the Steam wand ⓰ with a damp cloth.
• 2—3 Months
1. Soak the Steam wand ⓰ overnight in the Milk
Pitcher with warm water.2. In the morning remove
the Pitcher and rinse ensuring that all traces of the
solution have been removed.
3. Wipe Steam wand ⓰ with a damp cloth ensuring
that all traces of the cleaning tablet have been
removed.
Note:Contact Gevi should you think that the filter holder seal
needs replacing. Do not attempt to change the Silicone Seal with
out first consulting Gevi.
If the Froth nozzle becomes clogged with milk resi-
due:
1. Insert the thicker 'STEAM' Cleaning needle(Not i-
ncluded) up the Froth nozzle hole and remove.
2. Run Hot Water through the Steam wand ⓰ for 4-
0 seconds.
Unblocking Steam Wand
— Over time this Seal loses its elasticity and may require replacement. The
seal may need replacing when watery espresso leaks from around the po-
rtafilter handle during extraction, or if the portafilter handle is loose when
fully turned to the centre position.
UNSCREW
4. Run Hot Water through the Steam wand ⓰ for 40
seconds.

3029
To make sure your appliance operates efficiently, internal pipe clean and
the peak flavor of coffee, it is necessary to clean the appliance’s water
scale periodically.
Descaling warning will be shown when the appliance has cumulatively
worked for 500 cycles.
Descaling Solution
You have 3 options:
A. One espresso machine descaling tablet.
or
B. Liquid descaler .
or
C. White vinegar & warm water.
You also can use powder descalers or others to clean your machine as you
like. For specific cleaning methods, please refer to the instructions
provided by your descaler provider.
Preparing for Descaling Cycle
Important: If the Descaling Cycle is not
completed or stopped part way through any
of the Descaling Steps, then you will need to
start the Descaling Cycle again from the
beginning.
• Fill Water tank ⓭ with Solution
1. Insert the Water tank ⓭ into position.
• Access the Descaling Cycle
1.Simultaneously press & hold power button
❶ and steam button ❹ for 3s at the same time,
then 4 button’s light keep blue fixed.
• Place Containers
1. Place a 1 Litre container under filter holder.
• Check Power
Ensure that：
1. The Power Plug is inserted into the outlet &
switched on.
2. the steam/water knob ⓮ is in the horizontal
position(off-position).
3. At that moment, the power button ❶ and
steam button ❹ light are blue and blink and
beep simultaneously about 10s.
A. We strongly recommend you use the citric acid (The ratio of citric
acid and water is 1:100).
B. To confirm descaling, fill the Water tank ⓭ with citric acid under
the MAX level.
Note:
DESCALING CYCLE

3231
1. The Steam wand ⓰ & filter holder now need to be purged clean
with fresh water to remove descaling solution.
—Rinse Water tank
1. Remove the Water tank ⓭ and rinse thoroughly under running
water, ensuring that all traces of the descaling solution have been
removed.
— Fill Water tank
1. Fill the Water tank ⓭ under the max line with cold water from the
tap and insert into position.
— Empty Containers
1. Empty water from the containers and replace.
2. Move to Step 3.Start Purge
Important: If Descaling Step 1 is not started
within 5 minutes after entering the Descaling
Cycle, the machine will exit the Descaling Cycle
and go back to the READY state.
Important: The Descaling Cycle can be exited
at any point by pressing the steam button ❹.
Step 1. Start Descaling Cycle
1. Press Double/long cup button ❸ , the
Double/long cup button ❸ will blink white
light slowly (the power button ❶ keep blue
light fixed).
2. After the appliance flows 70mL of water, it
stops and 4 buttons keep blue light fixed.
Step 2. Preparing for Purge
Important: There is a maximum of 5 minutes allowed to complete this
step before the Descaling Cycle exits.
Step 3. Start Purge
1. Move the cup under the Steam wand ⓰
2. Turn the steam/water knob ⓮ to the steam
“ ” position to release citric acid mix.
3. The Steam wand ⓰ will flow out and the
Single/short cup button ❷ and Double/long
cup button ❸ blink blue light slowly. (Please
refer to the section of “MAKING HOT WATER”.)
4. The Steam wand ⓰ will always flow out
citric acid until you turn the water/steam
knob ⓮ to horizontal position (off-position).
Note:Descaling warning will be shown every 10 cycles after
cancelling the descaling warning as the appliance hasn’t finished
the descaling yet.
Note:Left the citric acid stay in the appliance for 4 minutes at the
first time.

—1.Always use clean, room temperature water in the coffee maker.
—2.For an optimum coffee taste, buy whole coffee beans and finely
grind them just before brewing.
—3.Grind the bean every time before brew espresso in case you ever
used coffee powder. You must keep the unused coffee powder in a
cool, dry place.
—4. Do not reuse coffee powder since this will greatly reduce the
coffee’s flavor. Reheating coffee is not recommended as coffee is
at its peak flavor immediately after brewing.
The coffee maker
cannot work.
All four lights are
blink blue light at
the same time.
/The power outlet is
not plugged well.
There is not enough
water in the water
tank ⓭.
Plug the power cord
into a wall outlet co-
rrectly, if the applia-
nce still does not work,
please contact with
the authorized service
facility for repairing.
Please fill up the water
into the water tank ⓭,
but pay attention that
the water to fill must
not to exceed the MAX
line.
Solution
Problem Picture Possible Cause
3433
• Repeat the Steps from 1-3 for three times then the descaling is
finished.
• The Descaling Cycle is complete. The machine will return to the
READY state.
Descaling Cycle Clean Up
1. Empty water from the containers and clean, ensuring that all traces
of the descaling solution have been removed.
/
The power button ❶
keep blue light fixed,
the other button’s
light ( single cup bu-
tton ❷, double cup
button ❸ and steam
button ❹)blink blue
and beep at the same
time.
Coffee leaks out
from outer side of
portafilter ❿.
The machine is on
while the steam/water
knob ⓮ is not fixed
in the off position.
1.There is some coffee
powder on the edge of
portafilter ❿.
2. The portafilter ❿ is
not installed properly.
3. The coffee powder
is too fine.
4. The coffee powder
on the portafilter ❿
is pressed too tightly.
Reset steam / water
knob ⓮ to horizontal
position (off-position).
Clean coffee powder
on the edge of the
portafilter ❿.
Re-install the porta-
filter ❿ correctly.
Do not use coffee po-
wder that is too fine.
Press the coffee pow-
der lightly to the max
line.
SolutionProblem Picture Possible Cause
Note:After finish that , you could pour away the residual citric
acid mix in the tank and clean the parts ( Water tank ⓭,Steam
wand ⓰ , seal ring of the filter holder ❾) before making coffee.
Refill the tank with water and brew water before making coffee
again.
TIPS FOR PERFECT BARISTA
TROUBLESHOOTING

The power button ❶
blink red light, and
single cup button ❷
and double cup button
❸ blink blue light.
The pressure gauge
❻ pointer reaches
the red zone.
The temperature inside
the machine is too high,
because making coffee
immediately after ma-
king steam.
1. The coffee powder
is too fine which makes
the temperature of the
brewed coffee is higher
than normal.
2.Natural cooling：Do
nothing and let the
machine stand still
and wait for about
half an hour.
Do not use coffee
powder that is too
fine.
2.The outlet of the
filter/portafilter ❿ is
blocked.
3. The water outlet of
the filter holder ❾ in
the coffee maker is
blocked with coffee
powder.
Remove and clean the
filter and clean the
two outlet holes under
the portafilter ❿.
Clean the coffee pow-
der attached to the
machine's water outlet
of filter holder ❾ with
rag.
Solution
Problem Picture Possible Cause
1.Manual cooling：
Turn the steam/water
knob ⓮ to the “ ”
to reduce the pressure,
and hot water will flow
out. When the tempe-
rature becomes down,
the water pump will
stop automatically
after 20 seconds. After
the pressure is reduced,
turn the steam/water
knob ⓮to the horizontal
position (off-position)
and then begin to brew
coffee.
3635
/
The power button ❶
keep blue light fixed,
the other button’s
light ( single cup bu-
tton ❷, double cup
button ❸ and steam
button ❹)blink blue
and beep at the same
time.
Coffee leaks out
from outer side of
portafilter ❿.
The machine is on
while the steam/water
knob ⓮ is not fixed
in the off position.
1.There is some coffee
powder on the edge of
portafilter ❿.
2. The portafilter ❿ is
not installed properly.
3. The coffee powder
is too fine.
4. The coffee powder
on the portafilter ❿
is pressed too tightly.
Reset steam / water
knob ⓮ to horizontal
position (off-position).
Clean coffee powder
on the edge of the
portafilter ❿.
Re-install the porta-
filter ❿ correctly.
Do not use coffee po-
wder that is too fine.
Press the coffee pow-
der lightly to the max
line.
5. The two outlet holes
of the portafilter ❿ is
blocked.
6. The holes of the
filter is blocked.
Remove the filter and
clean the two outlet
holes under the
portafilter ❿.
Soak the filter in clean
water for about half an
hour, then clean it with
a brush.