GFW INCA 2 DOORS WARDROBE User manual

ASSEMBLY INSTRUCTIONS
INCA 1 DRAWER BEDSIDE CABINET
0:30 h
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small compoments used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of chocking hazards.
V1 01/18
Page 1 of 10
Size: 37x31x43,1cm
Colour: WAXED

Page 2 of 10
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
· This product is intended for a maximum weight of 5,6 kg spread evenly throughout the unit.
Do not exceed this weight.
· Due to the size of this product we recommend that it is assembled in the room intended for use.
· When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
· Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
· Check the pack and make sure you have all the parts listed.
· Ensure that this product is fully assembled as illustrated before use.
· Check all screws or bolts are tightened and inspect regularly
· This product should only be used on firm, level ground.
· Keep small parts out of reach of children.
· Make sure the legs remain in contact with the ground.
· Tools not included.
WARNINGS
· DO NOT use power tools to construct this product.
· DO NOT tighten screws until fully assembled.
· DO NOT over tighten screws or bolts.
· DO NOT use this product if parts are missing, damaged or worn.
· DO NOT sit or stand on the product.
CARE INFORMATION
· Never use scourers, abrasives or chemical cleaners.
· To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
· Do not use washing powders or any other substances containing abrasives, as these may scratch.

Page 3 of 10
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
12
11
14
13
15
04
06
10
05
02
07
09
08
03
01
08
09
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

Page 4 of 10
Parts:
Description: 01 -Top Panel
Qty: 01
Carton No: 1/1
Size: 370x310x16mm
Description: 10- Bottom Front Panel
Qty: 01
Carton No: 1/1
Size: 370x90x16mm
Description: 02 -Left Side Panel
Qty: 01
Carton No: 1/1
Size: 415x280x16mm
Description: 11 – Drawer Bottom
Qty: 01
Carton No: 1/1
Size: 271x218x3mm
Description: 03 - Right Side
Panel
Qty: 01
Carton No: 1/1
Size: 415x280x16mm
Description: 12 – Drawer Front
Qty: 01
Carton No: 1/1
Size: 240x120x16mm
Description: 04 - Right Front
Upright
Qty: 01
Carton No: 1/1
Size: 415x45x16mm
Description: 13 – Left Drawer Side
Qty: 01
Carton No:1/1
Size: 270x92x13mm
Description: 05 - Left Front
Upright
Qty: 01
Carton No: 1/1
Size: 415x45x16mm
Description: 14 – Drawer Back
Qty: 01
Carton No: 1/1
Size: 205x92x13mm
Description: 06 – Base Panel
Qty: 01
Carton No: 1/1
Size: 300x293x16mm
Description: 15 – Right Drawer Side
Qty: 01
Carton No: 1/1
Size: 270x92x13mm
Description: 07 – Back Panel
Qty: 01
Carton No: 1/1
Size: 350x316x3mm
Description: 08 – Runners
Qty: 02
Carton No: 1/1
Size: 260x40x16mm
Description: 09 – Bottom Side
Panel
Qty: 02
Carton No: 1/1
Size: 297x88x16mm
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

5
3
01x
E
Truss Head Screw
D4,7x16mm
04x
B
D26x20mm
16x
C
Wood Dowel
D8x30mm
30x
A
CSK Screw
D4x30mm
CSK Screw
10x
F
Nail Pin
L-23mm
Fixings (not to scale)
Page 5 of 10
Fixings (to scale)
01x
D
D35x30mm 04x
G
L100mm
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

01
02
Page 6 of 10
C x 16
G x 04
8,0 x 30mm
C
C
C
C
C
C
C
C
C
C
C
C
C
G
G
G
G
08
2x
02
03
C
06
13
15
A
A
A
A
03
02
04
05
A
A x 04
4,0 x 30mm
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18
G (4x)

03
04
Page 7 of 10
A
A
A
A
02
03
06
A x 04
4,0 x 30mm
A
A
A
09
A
A
09
A x 04
4,0 x 30mm
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

A x 04
A x 04
05
06
Page 8 of 10
07
A
A
10
A x 02
4,0 x 30mm
A
A
A
A
01
A
A
08
4,0 x 30mm
4,0 x 30mm
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

B x 04
D x 01 E x 01A x 08
08
09
Page 9 of 10
10
F
F
F
F
F
F
F
F
07
F
F
F
F
F
07
F x 10
14
A
E
D
A
A
A
11
12
AA
13
15
A
E
D
4,0 x 30mm
B
B
B
B
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

Your INCA 1 DRAWER BEDSIDE CABINET is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
COMPLETE ASSEMBLY
Keep instructions for future reference
Page 10 of 10
INCA 1 DRAWER BEDSIDE CABINET ASSEMBLY INSTRUCTIONS
V1 01/18

ASSEMBLY INSTRUCTIONS
INCA 2 DOORS WARDROBE
1:30 h
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small compoments used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of chocking hazards.
V1 01/18
Page 1 of 10
Size: 80x50x175,1cm
Colour: WAXED

Page 2 of 10
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
· This product is intended for a maximum weight of 35 kg spread evenly throughout the unit.
Do not exceed this weight.
· Due to the size of this product we recommend that it is assembled in the room intended for use.
· When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
· Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
· Check the pack and make sure you have all the parts listed.
· Ensure that this product is fully assembled as illustrated before use.
· Check all screws or bolts are tightened and inspect regularly
· This product should only be used on firm, level ground.
· Keep small parts out of reach of children.
· Make sure the legs remain in contact with the ground.
· Tools not included.
WARNINGS
· DO NOT use power tools to construct this product.
· DO NOT tighten screws until fully assembled.
· DO NOT over tighten screws or bolts.
· DO NOT use this product if parts are missing, damaged or worn.
· DO NOT sit or stand on the product.
· We recommend the use of the wall strap provided for safety reasons. N.B. Wall fixings are not
included – please source suitable fixings for your wall type. If in doubt please consult a qualified
tradesperson.
· Warning: Always ensure the area to be drilled is free from hidden electrical wires, water and gas
pipes.
· It is essential that this unit is fixed to a wall with the fixings provided
CARE INFORMATION
· Never use scourers, abrasives or chemical cleaners.
· To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
· Do not use washing powders or any other substances containing abrasives, as these may scratch.
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
V1 01/18

Page 3 of 10
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
07
12
13
09
09
10
01
02
03
08
06
05
04
11
14
14
15
16
V1 01/18

Page 4 of 10
Parts:
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
Description: 01 -Top Panel
Qty: 01
Carton No: 1/1
Size: 800x500x16mm
Description: 10- Bottom Front Panel
Qty: 01
Carton No: 1/1
Size: 800x90x16mm
Description: 02 -Left Side Panel
Qty: 01
Carton No: 1/1
Size: 1735x450x16mm
Description: 11 - Rail
Qty: 01
Carton No: 1/1
Size: 715x21x21mm
Description: 03 - Right Side
Panel
Qty: 01
Carton No: 1/1
Size: 1735x450x16mm
Description: 12 – Left Door
Qty: 01
Carton No: 1/1
Size: 1640x323x16mm
Description: 04 - Right Front
Upright
Qty: 01
Carton No: 1/1
Size: 1735x45x16mm
Description: 13 – Right Door
Qty: 01
Carton No:1/1
Size: 1640x323x16mm
Description: 05 - Left Front
Upright
Qty: 01
Carton No: 1/1
Size: 1735x45x16mm
Description: 14 – Back Panel
Qty: 02
Carton No: 1/1
Size: 1670x365x3mm
Description: 06 – Base Panel
Qty: 01
Carton No: 1/1
Size: 720x445x16mm
Description: 15 – Plastic Suppor for
Back Panel
Qty: 01
Carton No: 1/1
Size: 1642x26mm
Description: 07 – Top Shelf
Qty: 01
Carton No: 1/1
Size: 720x435x16mm
Description: 16 – Door Crossbeam
Qty: 01
Carton No: 1/1
Size: 1635x45x10mm
Description: 08 – Bottom Front
Crossbeam
Qty: 01
Carton No: 1/1
Size: 665x70x16mm
Description: 09 – Bottom Side
Panel
Qty: 02
Carton No: 1/1
Size: 467x88x16mm
V1 01/18

Fixings (not to scale)
Page 5 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
5
3
04x
M
CSK Screw
D3,5x20mm
Fixings (to scale)
CSK Screw
58x
C
CSK Screw
D3,0x14mm
CSK Screw
02x
J
Truss Head Screw
D4,7x16mm
02x
I
D26x20mm
3
02x
P
D15mm
22x
A
Wood Dowel
D8x30mm
06x
B
CSK Screw
D4,0x40mm
31x
D
CSK Screw
D4x30mm
CSK Screw
40x
F
Nail Pin
L-23mm
01x
N
CSK Screw
D3,5x14mm
CSK Screw
Ha
Hb
04x
H
D30x35mm
06x
E
40x69,5mm
01x
O
L-150mm
Safet Strap
02x
G
D35x30mm 08x
K
L100mm
02x
L
L65mm
V1 01/18

B
A
B
B
A
01
B
A
BA
A
A
B
A
B
A
01
02
03
D
D
D
D
D
D
D
D
04
05 02 03
K
K
K
K
K
K
K
K
D
A
A
A
D
D
D
D
D
D
A
A
A
A
A
AA
D
D
D
D
D
D
D
07
04
05
03
02
08
06
D
A
A
D
A
A
D
A
07
L
C
C
C
B x 06
4,0 x 40mm
Ax 22
8,0 x 30mm
C x 06
3,0 x 14mm
D x 23
4,0 x 30mm
K x 08 Lx 02
01
Page 6 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
V1 01/18

2X
13
12
13
02
09
D
D
D
09
10
D
D
D
D
D
09
09
10
08
C
C
E
C
C
C
G
J
13
M
M
M
M
12 16
D
D
D
M x 04 D x 08
4,0 x 30mm
E x 06
G x 02J x 2
C x 36
3,0 x 14mm3,5 x 20mm
02
Page 7 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
V1 01/18

F
14
15
14
14
Ha
Ha
Hb
Ha
Ha
Hb
I
I
13
12
07
11
06
C
Ha
I
03
Page 8 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
F x 40I x 2
Ha
H x 04
Hb
C x 16
3,0 x 14mm
V1 01/18
Hb
C
C
C
Ha
C
C
C
Ha
C
C
C
Ha
Hb
Hb

04
Page 9 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
P 02
O 01
N 01
3,5x14
The product should be fixed to the wall
using the wall strap.
The screw to fix to the wall is not supplied
with this product.
Please use screw and fixing appropriate
for the wall type. (If in doubt you should seek
professional advice)
Always ensure the area to beWarning:
drilled is free from hidden electrical wires,
water and gas pipes.
O
P
N
P
V1 01/18

Your INCA 2 DOORS WARDROBE is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
COMPLETE ASSEMBLY
Keep instructions for future reference
Page 10 of 10
INCA 2 DOORS WARDROBE ASSEMBLY INSTRUCTIONS
V1 01/18