GFW MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD User manual

Size:
Colour:
Finish:
50.1 x 19.6 x 64cm (WDH)
White
Melamine, High Gloss & Mirrored Fascia
Version 1 - 201211
PO No：
Page 1of 10
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
1 Hour
Set Up
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Moritz Two Mirror Door Cupboard. Please read the
instructions carefully to ensure safe operation of this product, especially the
installation warnings shown in Page 2 of this Assembly Instruction.

MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS
IMPORTANT -READ CAREFULLY -RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
INFORMATION
This product is designed to hold 8 Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
This is a wall mounted cupboard,for safety it is designed to fix to the wall using the
supports (E) and brackets (F).
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
Version 1 - 201211
Page 2of 10
In order to prevent the cabinet falling down this product must be installed with the wall
hanging devices provided - do not use any other means to support the product.
Carefully assess the suitability of the wall to ensure that the fastening device will
withstand the load and forces generated. Walls can be quite different in construction so
fixings are not supplied - choose the most suitable fixing for your wall type - if in doubt
consult an expert.
When drilling the wall always be sure the area to be drilled is free from hidden electrical
wiring, water or gas pipes.
The assembly of this product must be done carefully following the detailed stages in the
Assembly Instruction.
Installation of this product needs to be carried out in accordance with the following
instructions, see Steps 8 & 9.
INSTALLATION WARNINGS:

Version 1 - 201211
Page 3of 10
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are
missing, please contact your retailer.
The fittings pack contains small items that should be kept away from children.
4
3
2
5
6
7
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS
1
1
6
All parts are packed in one carton
Size:640 x 249 x 19 mm
Carton No: 1/1
Description: LH Door
Description:
Qty: 1
mm51x181x046:eziS
Carton No: 1/1
Qty: 1
Carton No: 1/1
Carton No: 1/1
4 5
Qty: 2 Qty: 1
Size:470 x 166 x 15 mm mm51x181x046:eziS
123
lenaPesaB&poT:noitpircseD Description: RH Side Panel
Description: Back Panel
Qty: 1
Size: 627 x 478 x 3 mm
Carton No: 1/1
Size:470 x 166 x 15 mm
Carton No: 1/1
Description: Adjustable Shelf
Qty: 2
6
RH Door
Carton No: 1/1
7
Qty: 1
mm91x942x046:eziS
Description:
LH Side Panel

Version 1 - 201211
Page 4of 10
General Hints & Tips
A28mm
A
A
B
Tighten
Stop when
level
Fittings (not to scale)
QuantityCode Item
2E
2F
4
C
8A
8B
D 4
Item QuantityCode
Fittings (to scale)
Cam Lock
Cam Bolt
10 20 30 40 50 60 70 80
(38mm overall)
8
Cam Cover Sticker
S
Screw for Fitting Wall
Hanging Support
(4x32mm)
Screw for Fitting
Back Panel (3x12mm)
Wall Hanging Support
(Fixed to Cabinet)
Wall Hanging
Bracket (Fixed to Wall)
4
Door Buffer
N
8
Shelf SupportL
Screw for Fitting Hinge
(4x14mm)
T
Fittings (hinge and screw is packed together)
QuantityCode Item
16
Hinge Set 4K
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS

Fittings required
For this step:
Tools required
Version 1 - 201211
Page 5of 10
STEP 1
STEP 2
For this step:
Tools required
A x8
Fittings required
Tighten
B
B x4
C x4
E x2
2
3
Ax4
Ax4
Cx2
ECx2
E
Bx2
Bx2
2
1
1
TOP
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS

Fittings required
Version 1 - 201211
Page 6of 10
STEP 3
STEP 4
For this step:
Tools required
Fittings required
For this step:
Tools required
B x4
D x4
Sx4
Sx4
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS
Bx2
3
Bx2
Sx4
TOP
4
TOP
D
D
D
D
Sx4

Version 1 - 201211
Page 7of 10
STEP 5
STEP 6
For this step:
Tools required
Fittings required
For this step:
Tools required
L x8
6
6
L x2
L x2
L x2
L x2
Tx2
K
x4
x4
5
K
7
K x4
Fittings required
N x4
N
T x8
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS

1
2
T
T
Version 1 - 201211
Page 8of 10
STEP 7
For this step:
Tools required
Fittings required
After adjusting hinge plates vertically, please re-tighten screws (T).
D
D
Check all screws (T) are tight before use - please do not over-tighten.
T x8
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS

Version 1 - 201211
Page 9of 10
STEP 8
For this step:
Tools required
Warning: Always ensure the area to be drilled is free from hidden
electrical wires, water or gas pipes.
For this step:
Tools required
STEP 9
E
F
V On the hanging
wall supports make
certain that hooks (x)
are fully extended by
turning lower screws
anti-clockwise.
(x)
VI Hang the cabinet onto the brackets by
carefully aligning the end panels so they just miss
the outer sides of the brackets. To make cabinet
level, turn upper screw clockwise on one side only.
VII When unit is
level, tighten lower
screws clockwise so
clamping unit to wall -
do not over-tighten.
I Decide on the height
you want the cupboard to be
then holding one bracket level,
mark dead-centre of the three
holes.
Following the diagram, position
and mark holes in the second
bracket.
II
Drill the
holes in the wall.
F
FOR SAFETY,
PLEASE USE ALL
THREE WALL
FIXINGS IN THE
BRACKET
IV
III
Knock in your wall
plugs or other wall fixings.
Fix brackets to
the wall.
Fittings required
F x2
468mm
same
horizontal
level
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS

Version 1 - 201211
Page 10 of 10
Assembly Completed
Keep instructions for future reference
Your Moritz two mirror door cupboard is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
If the mirror is cracked or broken please do not use the product; remove the affected door and
contact your retailer.
MORITZ TWO MIRROR DOOR WALL MOUNTED CUPBOARD ASSEMBLY INSTRUCTIONS