GFW NORDICA 4 DRAWER CHEST User manual

NORDICA 4 DRAWER CHEST ASSEMBLY INSTRUCTIONS
Thank you for purchasing the 4 DRAWER CHEST.
Please read the instructions carefully to ensure safe operation of the product.
Page
Batch No : PO# XXXX
Colour : Oak / Light Grey / White
Size: (W) 207 x (D) 593 x (H)900mm
Page 1 of 14 V1 3/19
2

Page 2 of 14
This product is intended for a maximum weight of 27kgs and drawer load capacity 7kg each.
Do not exceed this weight.
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
DO NOT use power tools to construct this product.
DO NOT over tighten screw or bolts.
DO NOT use this product if parts are missing, damage or worn.
DO NOT stand or sit on this product.
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
V1 3/19
We recommend the use of the wall safety bracket provided for safety reasons. N.B. Wall fixings suitable for a
solid wall are included although the wall plug provided may not be suitable for other type of walls such as hollow
walls. Fixings suitable for your wall type must be obtained separately..
If in doubt please consult a qualified trade person. Warning: Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
It is essential that this unit is fixed to a wall with the fixings provided.

Side Panel (L) (15 x 378 x 740mm)A 1
BSide Panel (R) (15 x 378 x 740mm) 1
CTop Panel (25 x 395 x 720mm) 1
DBottom Panel (15 x 395 x 720mm) 1
EFront Support Panel (15 x 80 x 688mm) 1
FBack Support Panel (15 x 80 x 688mm) 1
Page 3 of 14 V1 3/19
Drawer Support (15 x 325 x 60mm)K 4
YBack Panel (2.5 x 348.5 x 749mm) 2
ZDrawer Bottom (2.5 x 334 x 642mm) 4
Y
Y
C
A
F
E
B
D
Z
H
Z
I
J
G
G
G
H
J
I
G
K
H
H
GFront Drawer (15 x 180 x 716mm) 4
HDrawer Side (L) (15 x 140 x 340mm) 4
Drawer Side (R) (15 x 140 x 340mm)
I4
JDrawer Back ( 15 x 140 x 633mm) 4

5
3
4set
n
Drawer Slide
CL
CR
(350 mm)
4set
o
Drawer Slide
(350 mm)
1x
p
Allen Key
M4
4x
l
U Wooden Handle
(96 Hole) 8x
m
Backply Stopper
a
Unitar Screw
4x
M6.3 x 40mm
b
CSK Screw
16x
M4.7 x 38mm
c
Wooden Dowel
40x
D8 x 30mm
h
Csk Screw
17x
M3.5 x 15mm
i
Minifix Cam
16x
D15 x 12mm
16x
j
Euro Screw
D6 x 9mm
Page 4 of 14 V1 3/19
e
Minifix Bolt
16x
M5 x 29mm
d
CSK Screw
10x
M4 x 30mm
g
Csk Screw
8x
M3.1 x 20mm
f
Handle Screw
8x
M4 x 22mm
1x
k
L-Mounting Bracket

STEP 1
40 x
c
Parts Required Qty
Panel (K ) 4
Panel (H) 4
Panel ( I)
Page 5 of 15 V1 3/19
4
X4
X4
X4
arts Required Qty
Panel (A) 1
Panel (B) 1
Panel (E)
Panel (F) 1
1
c
c
c
c
c
c
c
c
c
c
A
B
F
E
H
K
I
P