GFW QUEEN ANNE WMI14931 User manual

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 1of 10
Thank you for purchasing the QUEEN ANNE DRESSER & STOOL. Please read the
instructions carefully to ensure safe operation of the product.
Size: W710 x D405 x H1270mm
Colour: BLACK,IVORY
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of
the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept away
from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 2of 10
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum weight of 30 kg. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
WARNINGS
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT sit or stand on the product.
DO NOT place very hot or very cold items on the glass surface(s) unless adequately thick tablemats are used
to prevent such items from coming into contact with the glass.
DO NOT sit or stand upon horizontal glass surface(s).
DO NOT strike the glass with hard or pointed items, or use the glass as a chopping surface.
If a glass component is chipped or broken, stop using the product and consult the manufacturer or supplier.
.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soft soap if necessary; do
not use washing powders or any other substances containing abrasives since these substances scratch glass.

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 3of 10
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 4of 10
Parts
1.
2.
3.
4.
Description: Dresser Top
Qty: 1
Carton No: 1 of 1
Description: Dresser Leg
Qty: 4
Carton No: 1 of 1
Description: Mirror
Qty: 1
Carton No: 1 of 1
Description: Base Mirror
Support
Qty: 1
Carton No: 1 of 1
5.
6.
7.
Description: Mirror
Support
Qty: 2
Carton No: 1 of 1
Description: Stool Top
Qty: 1
Carton No: 1 of 1
Description: Stool Legs
Qty: 4
Carton No: 1 of 1

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 5of 10

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 6of 10
Hints and Tips
Layout Parts on Soft Surface
Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton
The Barrel nut must be inline with the bolt.
After insertion the bolt will thread through
the nut to secure.

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 7of 10
STEP 1
Parts Required
1. Dresser Top x 1
2. Dresser Leg x 4
B. Large Bolt x 8
F. Large Washer x
8
G. 4mm Allen Key x
1
STEP 2
Parts Required
4. Base Mirror
Support x 1
5. Mirror Support x
2
C. Small Bolt x 4
E. Small Washer x
4

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 8of 10
STEP 3
Parts Required
Ensure the barrel nut is lined up with the bolt when fitting.
B. Large Bolt x 2
D. Barrel Nut x 2
E. Small Washer x
2
G. 4mm Allen Key x
1
STEP 4
Parts Required
3. Mirror x 1
A. Mirror Bolt x 2

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 9of 10
STEP 5
Parts Required
6. Stool Top x 1
7. Stool Legs x 4
B. Bolt x 8
F. Large Washer x
8
G.4mm Allen Key x
1

QUEEN ANNE DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
Batch No.:WMI14931
Page 10 of 10
Complete Assembly
Your QUEEN ANNE DRESSER & STOOL is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage. Also,
make sure the connectors are tight and secure.
Keep instructions for future reference