GFW BLOC User manual

Size: 104 x 43 x 55 cm (WDH)
Colour: Concrete
Finish: Melamine
BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Bloc Corner TV Unit.
Please read the instructions carefully to ensure safe operation of this product.
Page 1of 14
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
x1
1.5 Hour
Set Up
PO No :
Version 1 - 210407
6644

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 2of 14
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
To clean, wipe with a damp cloth.
Never use scourers, abrasives or chemical cleaners.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 20Kg in total, spread evenly over the whole of the unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and
a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on
a clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.
Version 1 - 210407

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 3of 14
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer.
The fittings pack contains small items that should be kept away from children.
1
13
12
14
14
15
16
17
18 3
2
5
4
7
6
9
9
10
10
11
8
Version 1 - 210407

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 4of 14
All parts are packed in one carton
Description: Drawer Back
Description: Front Base Support
Qty: 1
Size: 130 x 62 x 15 mm
Carton No: 1/1
123
Description: Top Panel Description: LH Side Panel Description: RH Side Panel
Qty: 1 Qty: 1 Qty: 1
Size: 1035 x 430 x 50 mm Size: 500 x 230 x 38 mm Size: 500 x 230 x 38 mm
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
456
Description:
LH Divider Panel
Description:
RH Divider Panel
Description: Base Panel
Qty: 1
Qty: 1
Qty: 1
Size: 400 x 389 x 15 mm Size: 400 x 389 x 15 mm Size: 957 x 390 x 38 mm
Carton No: 1/1 Carton No: 1/1 Carton No: 1/1
789
Description: Upper Fixed Shelf
Qty: 1
Size: 597 x 368 x 15 mm
Carton No: 1/1
Description: Lower Fixed Shelf
Qty: 1
Size: 597 x 388 x 15 mm
Carton No: 1/1
Description: Rear Divider Panel
Qty: 2
Size: 400 x 165 x 15 mm
Carton No: 1/1
10
11
12
Description: Side Fixed Shelf Description: Back Panel
Qty: 2
Qty: 1
Size: 198 x 165 x 15 mm Size: 625 x 436 x 3 mm
Carton No: 1/1 Carton No: 1/1
13 14 15
Description: Drawer Front Description:
Drawer Side Description: Drawer Base Support
Qty: 1
Qty: 2
Qty: 1
Size: 591 x 160 x 15 mm Size: 335 x 116 x 15 mm Size: 335 x 45 x 15 mm
Carton No: 1/1 Carton No: 1/1 Carton No: 1/1
16 17 18
Size: 572 x 116 x 15 mm
Carton No: 1/1
Description: Drawer Base
Qty: 1Qty: 1
Size: 550 x 343 x 3 mm
Carton No: 1/1
Description: Rear Base Support
Qty: 1
Size: 130 x 62 x 15 mm
Carton No: 1/1
Version 1 - 210407
A
A
General Hints & Tips
B
Tighten
25mm
A
Stop when
level

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 5of 14
42A
42B
25C
E20
Item QuantityCode
Fittings (to scale)
Cam Lock
Dowel (8 x 30mm)
Cam Bolt
(35mm overall)
10 20 30 40 50 60 70 80
4
H
Carcass Screw for
Base
Fitting Divider Panel to
(M7x60mm)
D10
Nail for Fitting Back
Panel (2 x12mm)
Screw for Fitting Runner
Back Panel and Handle
(3 x12mm)
Version 1 - 210407
Fittings (not to scale)
QuantityCode Item
2
L
12K Cam Lock
Cover
1M Allen Key (4mm)
Handle

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 6of 14
Fittings (not to scale)
L
R
QuantityCode
1P
Q 1
1R
Item
Outer Drawer
Runner - Left
Inner Drawer
Runner - Right
InnerDrawer
Runner - Left
L
Version 1 - 210407
1
N
Outer Drawer
Runner - Right
STEP 1
Fittings required
For this step:
Tools required
Ax4
Ax2
Ex2
E
P
P
A x6
E x2
P x1
4
R

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
STEP 2
STEP 3
For this step:
Tools required
Bx4
Cx4
Tighten
B
C
Fittings required
B x4
C x4
4
7
8
Version 1 - 210407
Page 7of 14
For this step:
Tools required
Ax4
Ax2
Ex2
E
N
N
Fittings required
A x6
E x2
N x1
5

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 8of 14
STEP 4
STEP 5
For this step:
Tools required
Tighten
B
C
Fittings required
B x4
C x4
Bx4
Cx4
5
Version 1 - 210407
Fittings required
For this step:
Tools required
C x4
H x4
M
C
H
M
Cx4
Hx4
6

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 9of 14
STEP 6
STEP 7
For this step:
Tools required
Bx4
B
B
Fittings required
B x4
9
9
A x3
Ax3
Version 1 - 210407
For this step:
Tools required
Ax8
Ax4
Ax4
A
Fittings required
A x17
Tighten
B
1
2
3
18
12
B
B x1

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 10 of 14
STEP 8
STEP 9
For this step:
Tools required
Cx4
Bx4
Fittings required
B x4
C x4
Tighten
B
C
3
10
Version 1 - 210407
For this step:
Tools required
Bx4
Bx3 Cx4
Fittings required
B x7
C x5
C
10
2
C
C
18
12

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 11 of 14
STEP 10
STEP 11
For this step:
Tools required
Fittings required
B x8
C x4
Tighten
B
C
Bx8
Kx8 Cx4
1
K x8
Version 1 - 210407
For this step:
Tools required
Fittings required
B x4
A x10
Ax5
Ax5
Bx4
13
14
14
16
16
17

B
BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 12 of 14
STEP 12
For this step:
Tools required
Fittings required
B x6
K x4
L x2
Q x1
R x1
E
R
R
Q
Q
E
E x8
Ex4
Lx2
Ex2
Ex2
Version 1 - 210407
15
13
Bx5
Kx4

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 13 of 14
STEP 13
STEP 14
For this step:
Tools required
For this step:
Tools required
Fittings required
D
Dx10
Fittings required
11
Ex8
D x10
E x8
E
Version 1 - 210407

BLOC CORNER TV UNIT ASSEMBLY INSTRUCTIONS
Page 14 of 14
Assembly Completed
Your Bloc Corner TV Unit is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference
Version 1 - 210407