GFW MADISON TRUNDLE BED User manual

MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS
W1900mm×D950mm×H350mm 3ft SINGLE
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts
for the assembly.
CAUTION:There are small components used in the construction of this unit.These loose items should
be kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
COLOUR: WHITE
Thank you for purchasing the MADISON TRUNDLE BED.
Please read the instructions carefully to ensure safe operation of the product.
Tools Required
Batch no:WMI16394 (PO#2508)
Page 1 of 9
4mm Allen key x 1
(INCLUDED) x2
1.5Hour
Set Up
Spanner x 1
(INCLUDED)

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
•This product is intended for a maximum person’s weight of 100kg per side. Do not exceed
this weight.
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled and secured as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Tools are included.
WARNINGS
•DO make sure the legs remain in contact with the ground.
•DO keep small parts out of reach of children.
•DO NOT use power tools to construct this product.
•DO NOT tighten screws until fully assembled.
•DO NOT over tighten screws or bolts.
•DO NOT use this product if parts are missing, damaged or worn.
•DO NOT stand on the product.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners
or detergents as they can bleach or damage the product.
Batch no:WMI16394 (PO#2508)
Page 2 of 9
MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS

Please check the pack contents before assembling the product.If any
components are missing,please contact your retailer.The fittings pack
contains small items that should be kept away from small children.
1
1
3
6
7
3
Batch no:WMI16394 (PO#2508)
Page 3 of 9
MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS
2
2
4
4
4
4
5
5
55

Batch no:WMI16394 (PO#2508)
Page 4 of 9
MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS
1
Description:End Rail
Qty:2PCS
Dimension: 900*80*30MM
Description:HORIZONTAL METAL
RAIL
Qty:2PCS
Dimension: 1900*50*50MM
Parts
2 3
4
Description:METAL SUPPORT
LEG RAIL
Qty:2PCS
Dimension: 955*330*60MM
Description:ROLLER WHEEL
Qty:4PCS
Dimension: 80*70*20MM
5
Description:Stopper
Qty:4PCS
Dimension: 40*30*20MM
6
Description:Wooden Slat
Qty:13PCS
Dimension: 895*55*10MM
7
Description:Single Plastic Cap
Qty:26PCS
Dimension: 57*30*13MM

CAUTION: There are many small components used in the
construction of this product. Please keep these components
away from young children whilst assembling this product .
If you keep the fittings in a bowl during assembly you will
be less likely to lose them!
Batch no:WMI16394 (PO#2508)
Page 5 of 9
MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS
Fixings (to scale)
Ref Dimensions Qty
ABolt-M8x75MM 4
BBolt-M6x15MM 16
C
D
Flat Washer-Ø8x16MM 8
4mm Allen Key 1
E
10 20 30 40 50 60 70 80
1
Nut-M8x13MM 4
Spanner
F
(Not to scale)

Lay out all 4 sides on a soft surface i.e. Rug, Carpet or Packaging
Carton.
Layout Parts on Soft Surface
MADISON DAY BED ASSEMBLY INSTRUCTIONS
Batch no:WMI16394 (PO#2508)
Page 6 of 9
3
1
1
3

2
1
1
3
D
C
AB
B
MADISON TRUNDLE BED ASSEMBLY INSTRUCTIONS

Step3 Parts Required
Batch no:WMI16394 (PO#2508)
Page 8 of 9
1
1
2
7
6
7
5
Stopper x4
5
Wooden Slat x13
6
Single Plastic Cap x26
7
HORIZONTAL
METAL RAIL x2
1
METAL SUPPORT
LEG RAIL x2
2

Your MADISON TRUNDLE BED is now completely assembled.
Periodically check to ensure that the components are in their proper
position, free from damage. Also, make sure the connectors are tight
and secure.
Keep instructions for future reference
Batch no:WMI16394 (PO#2508)
Page 9 of 9
COMPLETE ASSEMBLY