GFW COLORADO 3-DRAWER BED User manual

2080mm×1060mm×1005mm 3ft Single
2080mm×1360mm×1005mm 4ft Small Double
2080mm×1510mm×1005mm 4ft 6 Double
2180mm×1660mm×1005mm 5ft King
Finish: Faux Leather
5mm Allen key x 1 4mm Allen key x 2
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fitting check list.Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION:There are small components used in the construction of this unit.These loose items should
be kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
COLOUR: BLACK, BROWN, WHITE
Thank you for purchasing the COLORADO 3-DRAWER BED.
Please read the instructions carefully to ensure safe operation of the product.
Tools Required
x2
1.5Hour
Set Up
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 1 of 16

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
•This product is intended for a maximum person’s weight of 130kg per side. Do not exceed this
weight.
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled and secured as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•This product should only be used on firm, level ground.
•Please dismantle for transportation
•Tools are included.
WARNINGS
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Do not use power tools to construct this product.
•Do not tighten screws until fully assembled.
•Do not over tighten screws or bolts.
•Do not use this product if parts are missing, damaged or worn.
•Do not stand on the product.
•Do not overload the drawers as this can cause damage.
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 2 of 16
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.

Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
2
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
1
4
3
5
5
5
5
6
6
6
6
7
8
89
13
12
10
11
14
15
17
16
16
18
19
20
20
20
20
21
22
24
23
23
25
25
26
Batch no:WMI15380
Page 3 of 16

L
R
1
CENTRE SLAT CAPS
4'6'': 13PCS / 5': 15PCS
Carton No: 3 of 3
PLASTIC SLAT CAPS
4'6'': 26 PCS / 5': 30 PCS
Carton No: 3 of 3
STOPPER PLATE
4PCS
Carton No: 3 of 3
RIGHT SIDE RAIL
1PC
Carton No: 2 of 3
LEFT SIDE RAIL
1PC
Carton No: 2 of 3
FOOTBOARD
1PC
Carton No: 1 of 3
HEADBOARD
1PC
Carton No: 1 of 3
HOOK BRACKET
2PCS
Carton No: 3 of 3
ADJUSTABLE LEG
4PCS
Carton No: 3 of 3
ROLLER WHEEL
12PCS
Carton No: 3 of 3
Horizontal support rail
1PC
Carton No: 1 of 3
CENTRE SUPPORT LEG
2PCS
Carton No: 3 of 3
Parts
2 3 4
5678
9 10 11 12
BENT SLATS
4'6'': 26 PCS / 5': 30 PCS
Carton No: 1 of 3
13
CENTRE SUPPORT
1PC
Carton No: 1 of 3
14
(SMALL DRAWER)
FRONT DRAWER PANEL
2PCS
Carton No: 3 of 3
15 16
17 18
"T" SUPPORT LEG
2PCS
Carton No: 3 of 3
19
"Z" BRACKET
6PCS
Carton No: 3 of 3
20
(SMALL DRAWER)
SIDE DRAWER PANEL
4PCS
Carton No: 3 of 3
(SMALL DRAWER)
BACK DRAWER PANEL
2PCS
Carton No: 3 of 3
(SMALL DRAWER)
BOTTOM DRAWER
2PCS
Carton No: 3 of 3
FOOTBOOARD METAL
FRAME
1PC
Carton No: 3 of 3
21
SIDE RAIL APRON
2PCS
Carton No: 3 of 3
25
CORNER BRACKET
2PCS
Carton No: 3 of 3
26
22
(BIG DRAWER)
BACK DRAWER PANEL
1PC
Carton No: 3 of 3
23
(BIG DRAWER)
SIDE DRAWER PANEL
2PCS
Carton No: 3 of 3
24
(BIG DRAWER)
BOTTOM DRAWER
1PC
Carton No: 3 of 3
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 4 of 16

Fixings (to scale)
Ref Dimensions Qty
ABolt-M8x20 8
BBolt-M6x15 30
CBolt-M6x25 46
FFlat Washer-Ø8x16
8
G
Spring Washer-Ø8x13
8
H
Flat Head Nut-M6x17 2
I 5mm Allen Key 1
J4mm Allen Key 2
(Not to scale)
10 20 30 40 50 60 70
DBolt-M6x55 6
E
Bolt-M6x30 2
Ref Dimensions Qty
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 5 of 16
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!

Lay out all 4 sides on a soft surface i.e. Rug, Carpet or Packaging
Carton to avoid damage.
1
4
3
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 6 of 16
2
Layout Parts on Soft Surface

Step 1
A:
B:
Parts Required
Step 2 Parts Required
3
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 7 of 16
X 4
3. Left side rail x 1
4. Right side rail x 1
7. Hook bracket x 2
25. Side rail apron x 2
I. 5mm Allen key
J. 4mm Allen key
A. 20mm M8 Bolt x 4
C. 25mm M6 Bolt x 6
E. Spring washer x 4
F. Flat washer x 4
1. Headboard x 1
6. Adjustable leg x 4
21. Footboard mental
frame x 1
C
J
FEA
I
7
EA
I
F
&4
25
21 &1
6
7
3&4

Step 3 Parts Required
Step 4 Parts Required
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 8 of 16
Once the side rails are in position, tighten the bolts so they hold
the side rails securely in place. Do not over tighten.
1. Headboard x 1
A. 20mm M8 Bolt x 4
E. Spring washer x 4
F. Flat washer x 4
I. 5mm Allen key
1. Headboard x 1
3. Left side rail x 1
4. Right side rail x 1
AEF
I
1
A
E
F
I
AEF
AEF
1
3&4
1

Step 5
MAKE CERTAIN THE BED IS SQUARE AS SHOWN.
Note:THEN tighten all bolts 100% using allen key
Parts Required
Parts Required
Step 6
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 9 of 16
X 4
D. 55mm M6 Bolt x 6
J. 4mm Allen key
11. Stopper plate x 4
16. ‘‘T’’ support leg x 2
B. 15mm M6 Bolt x 12
J. 4mm Allen key
D
J
B
J
3&4
21 25
4
11

Step 8 Parts Required
COLORADO 3-DRAWER BED ASSEMBLY INSTRUCTIONS
Batch no:WMI15380
Page 10 of 16
X 2
10. Horizontal support
rail x 1
B. 15mm M6 Bolt x 4
J. 4mm Allen key
Parts Required
Step 7
X 2
11. Stopper plate x 4
19. ‘‘T’’ support leg x 2
B. 15mm M6 Bolt x 12
J. 4mm Allen key
J
B
J
B
B
J
4
19
3
10