GFW VERONA OTTOMAN STORAGE BENCH User manual

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 1of 10
Thank you for purchasing the VERONA OTTOMAN STORAGE BENCH. Please read
the instructions carefully to ensure safe operation of the product.
Size: 1100x400x400mm
Colour: BLACK PU/ BROWN PU
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of
the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept away
from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 2of 10
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum weight of 50 kg. Do not exceed this weight
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent
it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included.
WARNINGS
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 3of 10
Parts
Please check the pack contents before assembling the product. If any components are missing, please contact your
retailer. The fittings pack contains small items that should be kept away from small children.

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 4of 10
1
2
3
LEFT SIDE PANEL
1 PC
CARTON 1 OF 1
RIGHT SIDE PANEL
1 PC
CARTON 1 OF 1
FRONT PANEL
1 PC
CARTON 1 OF 1
4
5
6
FEET
4 PCS
CARTON 1 OF 1
BACK PANEL
1 PC
CARTON 1 OF 1
TOP PANEL
1 PC
CARTON 1 OF 1
7

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 5of 10
BOTTOM PANEL
1 PC
CARTON 1 OF 1
Fixings (To scale)
Hardware list(Not to scale)

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 6of 10
STEP 1
Parts
Required
1: Left Side
Panel 1 pc
2: Right Side
Panel 1pc
3: Front
Panel 1pc
5: Back
Panel 1pc
C: Small Bolt
8pcs
D: Washer
8pcs
E: Allen Key
1pc
Lay out all pieces on a soft surface i.e. Rug, Carpet or Packaging Carton

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 7of 10
STEP 2
Parts
Required
7: Bottom
Panel 1pc
A: Screw
14pcs
G:Screwdrive
r (Not
supplied)
STEP 3
Parts
Required
G

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 8of 10
4: Feet 4pcs
B: Large Bolt
4pcs
D: Washer
4pcs
E: Allen Key
1pc
STEP 4
Parts
Required

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 9of 10
6: Top Panel
1pc
A: Screw
6pcs
STEP 5
Parts
Required
6

VERONA OTTOMAN STORAGE BENCH ASSEMBLY
INSTRUCTIONS
1122
Page 10 of 10
A: Screw 8pcs
F: Hinge 2pcs
COMPLETE