GFW LOIRE DRESSING TABLE SET User manual

Batch no: WMI14932
Page 01 of 08
1000 x 440 x 1330 (H)/WHITE
480 x 360 x 430 (H)/WHITE
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of
construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts for
the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items
should be kept away from young children whilst assembling your unit to avoid the danger of
choking hazards.
Thank you for purchasing the LOIRE DRESSING TABLE SET. Please read
the instructions carefully to ensure safe operation of the product.
Tools Required
revirdwercSpillihP
Allen Key

Page 02 of 08
Batch no: WMI14932
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
•
•
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
•Due to the size of this product we recommend that it is assembled in the room intended for
use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
WARNINGS
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Do not use power tools to construct this product.
•Do not tighten screws until fully assembled.
•Do not over tighten screws or bolts.
•Do not use this product if parts are missing, damaged or worn.
•Do not sit or stand on the Dresser.
•If a glass component is chipped or broken, stop using the product and consult the
manufacturer or supplier.
•Do not place very hot or very cold items on the glass surface(s) unless adequately thick
If in doubt please
consult a qualified tradesperson. Warning: Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
•It is essential that this unit is fixed to a wall with the fixings provided.
•When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soft soap if
necessary; do not use washing powders or any other substances containing abrasives since
these substances scratch glass.
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•Tools not included.
tablemats are used to prevent such items from coming into contact with the glass
•Do not sit or stand upon horizontal glass surface(s).
•Do not strike the glass with hard or pointed items, or use the glass as a chopping surface.
•We recommend the use of the wall strap provided for safety reasons. N.B.

Parts and Fittings Checklist
Please check the pack contents before assembling this product. If any components are
missing, please contact your retailer.
The fittings pack contains small items that should be kept away from small children.
Page 03 of 08
Batch no: WMI14932
1. Dresser top (1pc)
5. Mirror (1pc)
3. Mirror base support
(1pc)
4. Mirror support (2pcs)2. Dresser leg (4pcs)
6. Stool top (1pc) 7. Stool leg (4pcs) 8. Glass (1pc)
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS

Fittings
Item
Page 04 of 08
Batch no: WMI14932
Code
Quantity
ABolt ( M6 x 45mm )
Bolt ( M6 x 35mm )
16
Bolt ( M6 x 30mm )
Spring washer ( 1.5mm x 10mm )
4
20
20
2
1
2
2
4
B
C
D
E
F
G
H
I
J
Screw ( M6 x 20mm )
2
JBolt ( M4 x 25mm )
2
KKnob
1
L
1
M
1
N
1
O
Glass Shelf Support 6
P
4mm Allen Key
Mirror support screw (20mm x 60mm)
Flat Washer ( 2mm x 19mm )
Small flat washer ( 2mm x 12mm )
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
Screw ( M3 x 15mm )
Rawl Plug ( M8 x 30mm )
Wall Screw ( M3 x 30mm )

Page 05 of 08
STEP 1
STEP 2
PARTS REQUIRED
PARTS REQUIRED
* Pre-assembled
3. Mirror base
support x 1
1. Dresser top x 1
A. Bolt x 8
C. Spring washer x 8
D. Flat washer x 8
G. Allen key x 1
B. Bolt x 4
C. Spring washer x 4
D. Flat washer x 4
G. Allen key x 1
2. Dresser leg x 4
Batch no: WMI14932
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
X4
A
C
D
G
1
2
3
2
2
2
2
1
G
B
DC
X4

STEP 3
STEP 4
PARTS REQUIRED
PARTS REQUIRED
5. Mirror x 1
4. Mirror support x 2
* Pre-assembled
8
5
4
3
Page 06 of 08
Batch no: WMI14932
E. Small flat washer x 2
H. Mirror support screw x 2
I. Screw x 4
G. Allen key x 1
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
X2
F
EH
X2
I
4
4
5 4
P
K
J
8. Glass x 1
Phillip Screwdriver x 1
J. Bolt x 2
K. Knob x 2
P. Glass shelf support x 6

STEP 5
STEP 6
PARTS REQUIRED
PARTS REQUIRED
A. Bolt x 8
C. Spring washer x 8
D. Flat washer x 8
6. Stool top x 1
7. Stool leg x 4
7
7
7
7
6
7
G. Allen key x 1
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
G
A
D
C
X4
M. Rawl plug x 1
N. Screw x 1
L. Wall screw x 1
Phillip Screwdriver x 1
6
Batch no: WMI14932
Page 07 of 08
M
L
N
O
Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
wall

COMPLETED
LOIRE DRESSING TABLE SET ASSEMBLY INSTRUCTIONS
Batch no: WMI14932
Page 08 of 08