Giant NeosTrac Installation guide

NeosTrack FAQ
Basic Settings
I do not receive a GPS signal on my NeosTrack.
In most cases, a GPS signal should be acquired within 1 minute of turning on
your NeosTrack in an open environment. In some cases, it may take up to 5
minutes to find your current position. For instance:
- The first time using NeosTrack
- Starting your NeosTrack after a long period of not using.
- If the NeosTrack has been relocated without using it (such as after traveling
by plane or train).
- The NeosTrack memory is mostly full. This can delay the start up procedure.
Please delete unneeded ride history from the NeosTrack and retry.
If it takes longer than 5 minutes to acquire a GPS signal, turn the device off,
make sure that you are in an open area, without tall buildings or trees around
you, then, retry turning the device on to restart the GPS signal search
procedure.
How can I set the time on my NeosTrack?
Make sure the daylight-saving time is in the correct setting. Go to menu
(Setup>System>Time/Unit> Dlight Save) and adjust the daylight saving setting
per your time zone. When your NeosTrack acquires a GPS signal, the time
should set automatically.
My NeosTrack is frozen.
Press the bottom button ( ) for 3 seconds to turn off the NeosTrack. If the
NeosTrack does not turn off, hold the bottom and right-side buttons ( / / )
for a few seconds to reset your NeosTrack (*note: resetting the device will
delete all activites stored on the NeosTrack device).
My speed and distance data are incorrect.
Make sure you have the correct wheel size dimension entered in your

NeosTrack. An incorrect wheel size can result in false speed and distance data
displayed when using a speed sensor or Speed/Cadence sensor.
The altitude shown on my NeosTrack is incorrect.
Altitude on NeosTrack can be set up manually based on your current location.
Go to menu (Setup>System>Altitude>Altitude) and adjust to the correct
altitude.
The NeosTrack has fog or moisture underneath the screen. Why is this?
The NeosTrack altitude function based on barometric pressure. The pressure
sensor is covered by a Goretech membrane that is water resistant but is not
waterproof. Under certain circumstances (significant humidity or temperature
changes) it is normal for the screen to become temporarily foggy due to
extreme humidity/temperature changes. This condition should self-correct if
power charge cap is left open and NeosTrack is left screen-down overnight. If
the screen does not return to normal within 24 hours, please contact your local
Giant Bicycles retailer for assistance.
My PC or Mac cannot recognize my NeosTrack when I connect with a
USB cable.
Press the bottom button ( ) for 3 seconds to restart your NeosTrack, then
turn your NeosTrack on again to reconnect.
Sync Settings
I sync my NeosTrack via Wi-Fi, but I cannot find my riding data in either
NeosTrack App or website.
The NeosTrack UUID needs to be paired with the NeosTrack App before
performing data sync via Wi-Fi.
My NeosTrack does not connect via Bluetooth with my cell phone.
Please make sure your cell phone operating system software version update
to Android 5.0 or newer or iOS version 8.0 or newer. Turn on GPS location
service on phone and make sure Bluetooth on both the NeosTrack and cell
phone are turned on. Please also note you must do Bluetooth pairing in the
NeosTrack App not the Bluetooth settings in your phone.
In urban areas (such as high-density apartment buildings) there can be a large

number of Bluetooth devices present, which can cause interference. Please
turn the Bluetooth function on your cell phone off and then on again (or turn the
cell phone off and on again). Then retry uploading via Bluetooth.
NeosTrack App cannot pair with my NeosTrack UUID, or my cell phone
cannot connect with my NeosTrack
For security, each NeosTrack computer can only be paired and synced with
one NeosTrack App account. You may encounter issues due to your device
being paired with different accounts. Signing up separately using Facebook,
STRAVA™and email will create multiple user accounts. Please ensure
information is stored in only one account to avoid confusion, use only this
account to log-in to the NeosTrack App and website.
I cannot upload my activities from my NeosTrack to the NeosTrack App
or the website via Bluetooth or Wi-Fi.
Please make sure you press the recording button before your ride. If the
problem persists, reset your NeosTrack and re-sync it with your NeosTrack
App.
Please make sure you have stopped recording you activity correctly before
attempting to upload or sync your ride data. Not doing so can result in
incomplete data files, which may not upload correctly. Please see the
NeosTrack Quick-Start Guide or Detailed User Manual for correct recording
start/stop procedures.
The data uploaded on STRAVATM that is different from the date on
NeosTrack App or website.
STRAVATM has its algorithm to calculate the data. The NeosTrack App is
Google Maps-based. Sometimes there are discrepancies between the two
platforms.
The NeosTrack App failed to sync my activities to STRAVATM or
TrainingPeaks TM.
You must upload data to NeosTrack App first then auto sync to STRAVA™or
TrainingPeaks™. If you have already attempted a data sync without having the
account paired and wish to still upload your ride data to
STRAVA™/TrainingPeaks™, you can do so manually by connecting the device

to your PC or Mac and uploading the .fit files directly on the
STRAVA™/TrainingPeaks™ websites.
Sensor Settings
I don’t see speed data on my NeosTrack when using a speed sensor (for
indoor training).
Turn off the GPS function and set up the speed sensor as the main speed
source. Go to Menu (Setup>Bike Data>(if you have more than one bike, select
the bike in question)>Speed source>Priority 1>Speed/CAD)
My NeosTrack does not pair with my Shimano Di2.
AShimano D-Fly Management System is required to pair Shimano Di2 with
NeosTrack. You need to purchase and install a Shimano D-fly module for
Bluetooth data to be transmitted by the Shimano Di2 group-set.
I paired my power meter or my Shimano Di2 system with my NeosTrack,
but the information does not show on my NeosTrack.
Ensure you are using the correct bike profile and that there is no other bikes
within 5 meters when pairing. Go to menu (Setup>Bike Data>(if you have more
than one bike, select the bike in question)>Sensors>Power or Di2)
NeosTrack can be set up with a maximum of seven bike profiles; each bike
profile can pair more than one sensor individually, therefore make sure to set
the correct sensors to the right bike profile. Sensors being used across
multiple bike profiles will need to be paired again with each new bike profile.
I cannot detect or pair any sensors with my NeosTrack.
Ensure the sensor battery has enough power. If not, please replace with a new
battery (noting correct battery orientation). If the sensor is brand new,
remember to remove the protective battery tab before use.
Go to menu (Setup>Bike Data>(if you have more than one bike, select the bike
in question)> Sensors
I’m unable to login to the NeosTrack App?
The NeosTrack App has three ways to create an account via Facebook,
STRAVA™, or e-mail. Please sync to only one and remember which account
you are using.

- Please note, if you already paired your device UUID with Facebook, you have
to use Facebook to login. If you use your STRAVA™ account to login, it will not
recognize the account you created using Facebook.
-If you use an E-mail account to login and you forget your password, select the
link “Forget Password” to reset your password. You will receive an email with
your account information; please remember your Email login details to access
the password reset.
- If you cannot remember which login method your NeosTrack app account
uses to login or that is already paired with your device UUID. Please send an
email to Giant and provide your device UUID. We will investigate and remove
the account link for your device. Then, you need to create a new account and
begin the account/device pairing process again.
Navigation
I downloaded a GPX route from a third-party website and uploaded it into
the NeosTrack, but I cannot find the route or turn by turn instructions on
my NeosTrack when using the “Route” function.
Compatibility with all GPX files from a third-party source cannot be guaranteed.
The NeosTrack only supports the NeosTrack App and NeosTrack website
when planning a route. GPX routes from third-party websites may not display
at all or may display errors, such as turn by turn function, street naming, etc.
Bicycle routes are not specified in the Plan Route function on the
NeosTrack App or website.
The NeosTrack map is based on Google Maps. In some countries, bicycle
routes are not available or designated on Google Maps.