
6-10KVA UPS battery pack user manual www.giga-net.co.uk
Fig. 5 (16pcs batteries connection)
2.2.2. After the battery installation and connection done, check if BAT+ to N & N to BAT- voltages
are correct with multimeter or other equipments. Install the cover if the voltages are correct.
NOTE: Battery “+” “-” poles cannot be reversed, also cannot short the battery “+” “-” poles,
otherwise batteries would be damaged or other accidents would happen. Don’t touch the
battery “+” “-” poles at the same time. It’s better only single man make the operation.
3. Battery pack accessories
A complete of 6-10KVA UPS battery pack includes below accessories.
No.
Name
Specification
PCS
1 Cable 1# Black wire 1015 10AWG 250mm 250TC*2 12
2 Cable 2# Red wire 1015 10AWG 730mm 250TC+PA75B2-H PC2320+SB50 4
3 Cable 3# Black wire 1015 10AWG 170mm 250TC+PA75B0-H PC2320+SB50 4
4 Cable 4# 2wires white 1015 10AWG 200mm*2 PA75B9-H PC2320*3+SB50*3 1
5
Cable 5# Black wire 1015 10AWG 300mm PA75B2-H PC2320+PA75B0-H
PC2320+SB50*2
4
6
Cable 6# 2wires white 1015 10/12AWG 920*2/80*4mm BN5.5*2+SB50+PA75B9-H
PC2320+P30*4
1
7 Cable 7# Red wire 1015 10AWG 800mm E6012+PA75B2-H PC2320+SB50 1
8 Cable 8# Black wire 1015 10AWG 800mm E6012+PA75B0-H PC2320+SB50 1
9 Cable 9# 4wires Black 1015 12AWG 110/110/250/250mm P30*4+YI16 1
10 Cable 10# 4wires Red 1015 12AWG 110/110/250/250mm P30*4+YI16 1
11 Cable 11# Green & Yellow 1015 12AWG 80mm OI5.5-6*2 1
12 Breaker NDB2Z-63 C63/1 1P 63A/250VDC UL certified 2
13 Battery Pack W483*H133*D735 1