Gira Control 9 Client User manual

Control 9 Client
Order No. : 2078 00
Control 9 KNX
Order No. : 2079 00
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect device before working on it. At the same
time, take into account all circuit breakers that supply dangerous voltage to the device.
Do not operate the device with sharp or pointed objects. The touch-sensitive surface
could be damaged.
Do not use any sharp objects, acids or organic solvents for cleaning. Device can be
damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Front view with frame
1/11
82576732 03.06.2016
Control 9 Client, Control 9 KNX
KNX

Figure 2: Front view without Design frame
(1) Design frame
(2) Touchscreen surface
(3) Bracket for Design frame
(4) Holes for wall fastening
(5) Slot for SD memory card
(6) On/off push-button
(7) Service interface
(8) LED Prog. – for Control 9 KNX
(9) Button Prog. – for Control 9 KNX
(10) Internal microphone
(11) USB connection
(12) Internal loudspeaker
(13) Camera operating display
(14) Internal camera
(15) Panel for internal camera
3 Function
System information
Only for KNX device:
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
- Visualisation of system statuses and information on building automation
- Flush mounting in indoor areas - flush to the wall in a Control 9 installation housing (see
Accessories chapter), or with adapter frame in installation housing for information terminal
Product characteristics
- Illuminated graphic colour screen TFT, 800x480 pixels, 16.7 million colours
82576732 03.06.2016 2/11
KNX
Control 9 Client, Control 9 KNX

- Touchscreen, operation via touch directly on the screen, operation via touch directly on the
screen
- Operating system: Windows Embedded Standard 2009
- Fitting position horizontal or vertical – depending on application
- Integrated camera, hideable, e.g. for door communication
- Integrated loudspeaker
- Integrated microphone
- Interfaces - from, behind Design frame: USB, SD memory card
- Interfaces – accessible from rear: 2x USB, Ethernet, Stereo Audio-In, Stereo Audio-Out,
Video-In
Control 9 KNX:
- KNX Interface
- Graphical user interface for visualisation and operation of KNX devices
- Scenes, forced position, timer, presence simulation and additional functions
iWhen connected to an IP-/Ethernet network, additional services are available, e.g. Internet
browser.
iThe KNX user functions remain active even when the device is switched off.
Operating system: Windows Embedded
The operating system is based on Microsoft® Windows® XP Professional in a memory-optimised
version. All the components required for the device function are preinstalled. Additional drivers
or programs, e.g. Gira software package QuadClient, can be installed at any later time.
4 Operation
Cleaning the touchscreen
The touchscreen requires regular cleaning in order to guarantee the optimum touch sensitivity.
Keep the screen free of foreign bodies and dust. Use a soft, lint-free cloth to clean the screen. If
needed, moisten the cleaning cloth slightly.
iDo not use sharp cleaning agents, acids or organic solvents.
iKeep moisture from penetrating into the device. Do not spray the cleaning agent directly
onto the screen surface.
iDo not use sharp objects for cleaning.
Removing the Design frame
Certain operating elements are only accessible when the Design frame has been removed.
oHold the bottom of the Design frame with both hands.
oCarefully push the Design frame upwards and to the first - upwards and left in the case of
vertical mounting.
oWhen the Design frame is loose in the bracket, pull it carefully away from the wall.
Mounting the Design frame
oInsert the Design frame into the brackets (3) in the right position.
oCarefully push the Design frame downwards until it engages.
Switching a device on or off
The On/off push-button (6) can be reached when the Design frame (1) has been removed.
oSwitching on: Press the push-button (6).
The panel switches on after about 2 seconds.
The device is started.
oSwitching off: Press the push-button (6) briefly.
- or -
oPress the "Start" button and select the "Shut Down" command in the Start menu. In the
subsequent list box, select "Shut Down" again and press the "OK" button.
The operating system shuts down and switches off.
82576732 03.06.2016 3/11
KNX
Control 9 Client, Control 9 KNX

iOn the KNX device, the KNX application is first terminated. Press the push-button (6) once
again to switch off.
iAlternatively, the device can be shut down into Standby mode. Operating the touchscreen
immediately reactivates the function.
iWhen delivered, the device logs in automatically with the username Control and the
password gira .
Carrying out a reset
If the panel can no longer be operated, e.g. after a program has crashed, then the device can
be reset and switched off. Any unsaved data will be lost.
The On/off push-button (6) can be reached when the Design frame (1) has been removed.
oPress the push-button (6) for approx. 5 seconds.
The device switches off after about 5 seconds.
Touch-sensitive surface
The display screen features a touch-sensitive surface, the so-called touchscreen. The device is
operated by touching the screen surface with a finger or a special touchscreen stylus (not
included in the scope of delivery).
iDo not operate the touchscreen with sharp or pointed objects.
Graphical user interface
Operation is carried out using a mouse pointer (23), which follows the operations of the
touchscreen. Brief touches of the screen are interpreted as actuation of the mouse buttons.
Pressing the icon (26) in the information area of the taskbar (25) allows switching of the mouse
button. Text can be input using the Windows on-screen keyboard (24).
iAdditional operating devices, such as a keyboard or a mouse, can be connected to the
USB interface.
Figure 3: Monitor elements
(21) Windows desktop
(22) Start menu
(23) Mouse pointer
(24) On-screen keyboard
(25) Windows taskbar
(26) Mouse button switching
(27) Microsoft Windows terms and conditions
(28) Preinstalled system programs
82576732 03.06.2016 4/11
KNX
Control 9 Client, Control 9 KNX

In the information area of the taskbar, system programs are preinstalled using the symbol (28),
e.g. for setting the screen brightness.
Control 9 KNX: Recalling Windows user interface
After switching on, the KNX device starts the KNX application immediately. The display and
operating elements of the KNX application are controlled via its own graphic user interface. The
Windows user interface and system programs are accessible with a connected USB keyboard.
The USB keyboard is connected to a USB connection (11) or (37).
oPress Windows button.
The Windows taskbar (25) and start menu (22) open. The Windows functions e.g. for
starting, terminating, minimizing programs currently running, is accessible from here.
File-based write filter
The device contains an SSD drive with no moving parts as a mass storage facility. To prevent
accidental changes to the configuration, the drive is protected by a file-based write filter -
FBWF. Write operations to the protected are a diverted to a virtual drive in the RAM. Changes
to this data are shown in the directory but are only available until the device is restarted. The
previous data is restored is the device is switched-off or there is a power failure.
Changes to the "My Documents" directory are excluded from write-protection and are always
applied.
The write filter must be switched off:
- When directories are created, which are to remain intact after a restart,
- When programs are installed.
The system must be restarted:
- When the write filter is switched on or off,
- When the size of the virtual drive is changed,
- When memory compression is switched on or off.
The user can change the settings for the file-based write filter.
Installing programs
Before installing additional programs, take the system requirements of the programs into
account.
oDeactivating write filters: select the icon (28) with the mouse pointer.
oSelect the menu item "Write protection".
The window for the write filter settings opens.
oDeactivate write protection.
oPress the "Apply" button.
oPress the "Close" button.
oShut down the panel and restart it.
oInstall the program, e.g. from a USB stick.
oActivating write filters: select the icon (28) with the mouse pointer.
oSelect the menu item "Write protection".
oActivate write protection.
oPress the "Apply" button.
oPress the "Close" button.
oShut down the panel and restart it.
82576732 03.06.2016 5/11
KNX
Control 9 Client, Control 9 KNX

5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, disconnect all the corresponding miniature
circuit breakers. Cover up live parts in the working environment.
Mounting and connecting the device
Figure 4: Rear side - Connections
(31) KNX connection – only for Control 9 KNX
(32) Ethernet connection
(33) Mains connection
(34) Ventilation openings
(35) Connection for Audio input and output
(36) Connection for analogue video input
(37) USB-2.0 connections
iRecommendation: Install at eye-level, for optimal reading.
For wall-flush mounting: use a Control-9 installation housing.
For mounting in an installation housing for information terminals: use an adapter frame.
82576732 03.06.2016 6/11
KNX
Control 9 Client, Control 9 KNX

Figure 5: Ventilation openings, front side
Ensure sufficient cooling. Do not cover the ventilation openings on the front and rear side of the
appliance box (Figure 5).
oInstall the panel-mounted housing in the correct position - horizontally or vertically aligned
in the wall.
Horizontal mounting: observe the labelling OBEN TOP and UNTEN BOTTOM.
Vertical mounting: top side points to the left.
iObserve the mounting instructions of the installation housing.
oPull the connecting cables through the designated bushings.
DANGER!
Electrical shock when live parts are touched. The mains voltage and low
voltage are located in a shared appliance box. If there is an error, other
connected components may carry mains voltage.
Electrical shocks can be fatal.
Always secure the mains voltage with the enclosed tube.
Run the cables so that low voltage wires are securely protected against mains
voltage.
oStrip the mains voltage cable to the length of the enclosed tube.
oPull the supplied tube over the stripped mains voltage wires L and N.
oConnect the mains voltage L and N to terminal (33).
oControl 9 KNX: Connect the KNX bus line to terminal (31).
oConnect audio devices to terminal (35) (Figure 6).
oConnect the video device to terminal (36) (Figure 6).
Figure 6: Connection assignment, audio and video connections
82576732 03.06.2016 7/11
KNX
Control 9 Client, Control 9 KNX

Labelling Function
Audio R in Input, audio signal, right
Audio L in Input, audio signal, left
Audio GND GND audio inputs
Audio R out Output, audio signal, right
Audio L out Output, audio signal, left
Audio GND GND audio outputs
Video in Input, video signal
Video GND GND video signal
Table: Connection assignment, audio and video connections
Use the Ethernet connection (32) together with the supplied Ethernet adapter plug and Ethernet
adapter cable to connect to the IP network.
Pay attention to the correct colour assignment of the wires, EIA/TIA-568-A or -B. This can be
found in the documentation of the installed network components and routers.
iThe Ethernet connection on the device is carried out according to EIA/TIA-568-B.
oConnect Ethernet cable to the Ethernet adapter plug. To do this, strip the Ethernet wires,
do not skin, and insert into the cover of the adapter plug. Shorten any wires that are jutting
out and push the cover onto the adapter plug in the correct position (Figure 7).
oConnect the supplied Ethernet adapter cable to the terminal (32) and Ethernet adapter
plug.
Figure 7: Connection of adapter connector to Ethernet cable
oInstall device in panel-mounted housing. Use the screws supplied.
oInsert the Design frame in the correct direction into the designated brackets and push down
and to the left - down and to the right for vertical mounting - to fix it.
5.2 Commissioning
Control 9 KNX: Loading physical address
oPress the programming button (9).
The programming LED (8) lights up.
oAssign physical address.
The programming LED (8) goes out.
Control 9 KNX: Loading the application software
iThe project design and commissioning are performed using external project design and
commissioning software.
oEstablish connection to the commissioning PC via IP connection.
82576732 03.06.2016 8/11
KNX
Control 9 Client, Control 9 KNX

oDownload configuration data with the commissioning software.
- or -
Configuration data is saved on a USB stick or SD card.
oInsert USB stock or SD card into the appropriate slot – (5) or (11). In the KNX user
interface, select the entry "Commissioning" under "Settings". Select disk drive and path and
open the file with the configuration data.
6 Appendix
6.1 Technical data
Supply
Rated voltage AC 110 ... 230V~
Mains frequency 50 / 60Hz
Fine-wire fuse Littelfuse/Wickmann 372 1160 T 1.6 L 250
Standby power max. 1W
Power consumption max. 20W
Power consumption max. 8W (Display off)
Ambient conditions
Ambient temperature 0 ... +35°C
Storage/transport temperature -10 ... +70°C
Relative humidity 15 ... 85% (No moisture condensation)
Protection class II
System
Processor type Intel AtomTM Z510
Clock speed 1.1GHz
L2 cache 512kB
System chipset Intel System-Controller Hub US15W
Mass storage 2 GB SSD
RAM 1 GB RAM
Audio controller Realtek ALC888
Display
Type TFT 22,9 cm [9"], WVGA
Resolution 800×480 pixels
Number of colours 16,7 millions
Observation angle ± 85°
Touchscreen resistive
Camera
Resolution 1,3 million pixels
Connections
Audio output Line-out, Stereo
Audio input Line-in, Stereo
Video input FBAS/CVBS, 1 Vss
Memory card SDHC, max. 32 GB
USB
USB-Version 1.1/2.0
Connection 3× type A (2× back, 1× front)
Service interface
Connection Mini-USB, type AB, 5-pole
Network
Type 10/100 MBit/s Ethernet
Connection RJ45-socket 8/4-pin
Dimensions
Dimensions W×H×D 268×220×65 mm (without design frame)
Dimensions screen W×H 195×118 mm
diagonal 22,9 cm
6.2 Conformity
Data according to EN directive 617/2013
82576732 03.06.2016 9/11
KNX
Control 9 Client, Control 9 KNX

Product type Desktop-Thin-Client
Manufacturer Gira Giersiepen GmbH
Dahlienstrasse
Radevormwald
Model no. GIRA Control 9 Client
Year of manufacture Model 2015
Efficiency of the internal power supply unit 83.0% efficiency at 20% of the nominal load of
20 W
85.4% efficiency at 50% of the nominal load of
20 W
85.4% efficiency at 100% of the nominal load
of 20 W
Test parameters Test voltage 230 V/50 Hz
Distortion factor of the test voltage 1.6%
Power measuring unit Zimmer LMG95
Current-correct power measurement
Power supply unit operated separately with
electronic load GOSSEN METRAWATT
150R30
FLUKE 179 measuring device for adjusting the
load current
Maximum power Pmax= 19.6 W
Idle power Pidle= 16.6 W
Power in idle state Psleep= 0.93 W
Power in off state Poff= 0.73 W
Noise level < 6 dB(A)
Measurement method Test voltage 230 V
Distortion factor of the test voltage 1.6%
Power measuring unit Zimmer LMG95
Current-correct power measurement
6.3 Accessories
Design frame for Control 9 Order No. 2080 ..
Flush-mounted housing/flush-mounted box for
Control 9
Order No. 2082 00
Flush-mounted housing Order No. 0639 00
Adapter frame Order No. 2081 00
6.4 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
82576732 03.06.2016 10/11
KNX
Control 9 Client, Control 9 KNX

Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel [phone] - 602-0
Fax [phone] - 602-191
www.gira.de
[email protected]
82576732 03.06.2016 11/11
KNX
Control 9 Client, Control 9 KNX