GiveBest PTC-903 User manual

MODEL: PTC-903
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION AND
KEEP IT FOR FUTURE REFERENCE
Ceramic Space Heater
GiveBest

IMPORTANT SAFETY INSTRUCTIONS
WARNING: READ AND SAVE THESE OPERATING AND SAFTY
INSTRUCTIONS BEFORE USING THIS HEATER. PROTECT YOURSELF AND
OTHERS BY OBSERVING ALL SAFTY INFORMATION.
WARNING: FAILURE TO FOLLOW ANY OF THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE, INJURY OR DEATH.
YOUR RESPONSIBILITIES
Electrical appliances may expose people to hazards that can cause severe injury as well
as death. The use of electrical products may create hazards that include, but are not
limited to, injury, fire, electrical shock and electrical system damage. These instructions
are intended to provide you with the information you need to use the product and to avoid
such hazards.
When using electrical appliances, basic precautions should always be followed to reduce
risk of fire, electric shock, and injury to persons including the following:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces,
use handles when moving this heater. 2
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within
an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG
CORD This unit has a long cord that can be easily tripped on or pulled on,
causing injury. Please make sure it is arranged so that it will not drape over a
tabletop, etc. Where it can be pulled on by children or tripped over accidentally.
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact
a qualified electrician to replace loose or worn outlet.
To disconnect the heater, first turn off the product, then grip the plug body and pull it
from the wall outlet. Never pull by the cord.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock or fire or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline, paint or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock or injury to persons.
Always plug heater directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip).
Never tamper with this product or attempt to fix it. Any tampering with, or modification
of this can result in serious injury, death, or fire. Risk of electric shock. Do not
open. No user serviceable parts inside.
This is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
3
This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations. Never locate heater where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from
traffic area and where it will not be tripped over.
Children should be supervised to ensure that they do not play with the appliance Do
not use in outdoors.
It is normal for the plug to feel warm to the touch; however, a loose fit between the AC
For residential use only.
Do not use outdoors.
Extreme caution is necessary when any heater is used by or near children or invalids,
and whenever the heater is left operating and unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the heater
malfunctions or has been dropped or damaged in any manner Return heater to
manufacturer has been dropped or damaged in any manner. Discard heater or return
heater to authorized service facility for examination and/or repair.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from
the sides and rear.
.
heater
heater

1
3
5
1. Power Indicator
3. Heating Output Area
6. AC Power Cord
7. Manual Temperature Control Knob
8. Power/Mode Setting Knob
2
4
4
6
4. Tip-over Switch
5. Fan and Ventilation Area
2. Recoverable Temperature
Senser
PRODUCT OVERVIEW
Place the heater on a firm, level, open surface free from obstructions and at least 3
feet (0.9m) away from any combustible materials. DO NOT use on an unstable
surface such as bedding or deep carpeting. Be sure the heater is not in a position
where it may be tripped over by small children or pets. The heater’s rubber feet will
hold it firmly in position.
If your home has aluminum wiring have a licensed electrician check your receptacle’s
connections. When using a 1500-watt heater, aluminum wire connections can cause a
safety issue.
Before cleaning, or storage, or when not in use, turn the product’s controls to the OFF
position and unplug the heater from the electrical outlet and allow to cool.
78
FAN
OFF

OPERATIONS
1. Read the user manual carefully and keep it for future reference.
2. Place the heater on a firm, level, open surface free from obstructions and at least 3
feet (0.9m) away from any wall or any combustible material.
3. Make sure the Power/Mode Setting Knob pointing to the “OFF” position before
plugging the heater into the outlet.
4. Plug into a polarized 120V~ outlet.
OFF
BE SURE THAT THE PLUG FITS TIGHTLY INTO OUTLET.
When the plug fits loosely into receptacles, it may slip partially or completely out of the
receptacle with only the slight movement of the attached cord. Receptacles in this
condition may overheat and poses a serious fire hazard; if covered by a curtain or drape,
the fire hazard is even greater.
5. Turn the Manual Temperature Control Knob fully clockwise to the “+” position(highest
setting) for assuring the three modes settings activated.
5
AC
FAN
OFF

NOTES:
When reaching a certain comfortable temperature, slowly turn the Manual Temperature
Control Knob counter-clockwise until a “click” sound heard(about half-round of the knob
circle), at this time the unit will not be cut off when meeting overheat, and the unit will not
be turned on automatically after cooling down. So keep the knob on the position of the
latter half-round of the knob circle, if set it to front half-round knob circle, modes setting
also can not be used. If setting to “-” position, the unit will be turned off.
6. Select the proper setting to accommodate your comfort level with the Power Knob.
The Power/Mode Setting Knob is equipped with three(3) mode settings, “I” (750W), “II”
(1500W) and FAN( Natural Wind) . You can select the proper setting to accommodate
your comfort level with this Knob.
7. After heating, turn Power/Mode Setting Knob to “FAN” position to cool down the heater,
then turn to “OFF” position and unplug the heater.
1. A thermal overload protector is built in at the top of the heating panel, if the heater is
obstructed or blocked at front panel and rear ventilation panel by the curtain, drape or
cotton sheet etc., the thermal overload protector activates to prevent overheat.
2. When the internal temperature of the heater reaches up to 70 Celsius which may cause
fire hazard, the heater will be shut off automatically. It can ONLY resume operation when
the user resets the unit.
To Reset Heater:
1. Unplug the heater and wait about 15 minutes until the heater cooling down.
2. After the heater has cooled down, plug the unit into a 110-120V electrical outlet again
and follow the operation instructions described in this manual.
A tip-over switch is placed at the bottom of the heater, when the heater is taken away or
knocked over by pets or human, the heater will be shut off automatically to prevent burning
combustible materials.
OVERHEAT PROTECTION
TRIP-OVER PROTECTION
6
+

Do not immerse the heater in water.
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
After cleaning, be sure to completely dry the unit with a cloth or towel.
Storage Maintenance:
Store heater in a cool and dry location with power cord properly secured.
Please store the in its original carton or suitable container.
Q: What should I do if I have questions about this heater?
A: Please feel free to contact us by the contact info at the end of this manual.
Q: Are there any overheating protection measures?
A: Yes. Thermal overload protector is built in this heater. If the heater is overheated, it will
automatically shut off, it's a safety protection. When this situation happened, pull out the plug
for 15-30 minutes and plug in again to restart the heater thermal overload protector.
Q: If the heater is tripped over, will it automatically be shut down?
A: Yes. There is a tip-over switch at the bottom of the heater, when the heater has been lifted
and leaves from its position or is tripped over, it will be automatically shut off.
Q: Why sometimes the heater suddenly shut off and even the power indicator went out?
A: In this situation, please refer to the "TRIP-OVER PROTECTION " and OVERHEAT
PROTECTION” parts.
Model PTC-903
Voltage AC 120V~
Heating coverage 200 sq.Ft
Weight pounds
Dimension L(7.2") * W(6.1") * H( 9.2")
Material ABS+PA+Metal
Daily Maintenance:
Before cleaning, turn OFF the heater and unplug from the electrical outlet and wait it
to cool down.
Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the
motor and heating panel.
MAINTENANCE
FAQ
SPECIFICATIONS
7
heater
3.49

You should first read all instructions before attempting to use this product.
A. This 1 year limited warranty applies to repair or replacement of product found to be
defective in material or workmanship. This warranty does not apply to damage resulting
from commercial, abusive, unreasonable use or supplemental damage. Defects that are
the result of normal wear and tear will not be considered manufacturing defects under this
warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other rights which
vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of
this product from the original date of purchase.
B. This warranty does not cover damage resulting from any unauthorized attempts to repair
or from any use not in accordance with the instruction manual.
C. Please be sure to specify a model number and order ID.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER SERVICE
FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE HEATER TO THE
ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR
HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE
DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
ONE YEAR LIMITED WARRANTY
Brand family: Brightown, Givebest
[email protected]
US [phone]
Mon-Fri 8AM-10PM(EST)
For customer service and warranty, contact us here