Glacier bay HD58101-X5101 User manual

Modern Wall Bar Shower Kit 1-Spray 8 in.
Square Rain Shower Head with Hand Shower
USE AND CARE GUIDE
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this wall bar shower kit.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Glacier Bay!
THANK YOU
REV.02THD
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
01/2020
Model #
HD58101-X5101
SKU#
1002-774-598
304778429HD58101-X5110H

2
Table of Contents
Safety Information....................................2
Warranty ...................................................2
Planning Installation ..............................3
Tools Required .......................................3
Pre-Installation.........................................3
Package Contents..................................5
Installation ...............................................5
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
Care and Maintenance ............................9
Product Dimension .....................................4

3
Pre-Installation
PLANNING INSTALLATION
Contents. If any part is missing or damaged, do not attempt to install the product.
TOOLS REQUIRED
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA 2
2
BB
Wood screw
Plastic anchor
AA BB
Wrench Phillips
screwdriver
Tape measure Safety
goggles
Electric drill
CC DD
1
CC
Hex key
2
DD
Set screw
Hex key

PRODUCT DIMENSION
Pre-Installation
4
[200mm]
7.9"
[531.2mm]
20.9"
[965.6mm]
38"
Before installation, please be sure the height from floor to ceiling should be no less than 96 inches.
If less than 96 inches, the pipe and showerhead may not be installed properly and will not function properly.

PACKAGE CONTENTS
Part Description Quantity
B 1
C1
AThread sealant tape 1
D1
E
Pipe nipple
1
Pre-Installation (continued)
F 1
5
Connector
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Flange
G 1
H 1
I 1
J 1
K 1
E
D
K
G
M
L1
1
B
C
J
A
Slide bar
Tape
Showerhead
Pipe
Handshower
Hose
Clamping plate
Suctione
F
Pipe nipple
L
M
H
I

12Installing the connector
□
Installing the 1/2" pipe nipple
Installation
3-Option 1
6
3-Option 2
□Turn the seat (F1) counterclockwise to remove it
from the slide bar (F-shown on #4).
Put the tape (G) and seat (F1) on the wall by order
as shown below.
□Apply generous amount of thread sealant tape(A) to
both threaded ends of the 1/2” pipe nipple, B or C;
whichever is needed for the application.
Suction Installation
Screw connector (D) in a clockwise motion onto
the outlet pipe nipple.
Tape Installation
NOTE:
This product includes two pipe nipples, but only one
will be used during installation. When installed, the nipple
should extend no more than 1/2" (12mm) past the finished
wall, and no less than 1/4" (7mm) past the finished wall. One
of the two included nipples should work for your application,
but if neither size works for your application, you can find a
variety of pipe nipple sizes at your local Home Depot store.
D
□
3/8±1/8"
B or C
NOTE: Make sure the wall is clean and there are no rough
surfaces and gaps on the wall.
G F1
F1
23.34"
25.74"
□Turn the seat (F1) counterclockwise to remove it
from the slide bar (F-shown on #4).
Push the suction assembly (I) and clamping
plate (H), by order as shown below, tight to the wall.
□
NOTE: Clean the wall before installation and make sure the
wall’s surface is smooth (like glass wall or glaze tile).
H
I
F1
23.34"
25.74"
A
Hex key

Installation
3-Option 3 4 Installing the slide bar
5 Installing the flange
□
□
Screw Installation
7
Insert the pipe (J) into the slide bar (F) as shown
below.
Tighten the set screw (DD) to secure the slide bar.
Insert the flange (E) into the slide bar.
NOTE: You may need to slightly loosen the set screws before
inserting the connector to avoid damaging the O-rings.
E
6-Option 1
Suction Installation
DD
J
CC
F
□
□Turn the seat (F1) counterclockwise to remove it from
the slide bar (F-shown on #4).
Drill two 1/4" (7mm) holes in the wall which line up
with the seat (F1) screw holes. Push and secure
anchors (BB) into these holes.
Put the seat (F1) and the screws (AA), by order as
shown below, and fasten the screws (AA) to secure
the seat tight to the wall.
□
□
AA
BB
F1
F1
24.54"
□Push the top side of the slide bar onto the
connector (D), place the bottom part of the slide bar
onto the suction assembly (I) and rotate clockwise to
secure the bottom part tight to the suction assembly (I).
Tighten the set screws (DD) to lock the slide bar to
the connector as below.
NOTE: You may need to slightly loosen the set screws before
inserting the connector to avoid damaging the O-rings.
DD
CC
D
I
□
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.

Installation
6-Option 2 6-Option 3
Screw Installation
□
7 Installing the showerhead
□
Push the top side of the slide bar onto the
connector (D), place the bottom part of the slide bar
to the seat (F1) and rotate clockwise to secure the
bottom side tight to the seat (F1).
Tighten the set screws(DD) to lock the slide bar to
the connector as below.
Tape Installation
8
Insert the rubber sealing washer (K1) into the end
of the showerhead connector and install the
showerhead (K) by twisting clockwise onto the
pipe (J).
8Installing the hose
□Insert one of the rubber sealing washers into the
end of the hose connector (M) and hand tighten to
the hand shower (L). Hand tighten only.
Insert sealing washer into the other end of hose
connector (M) and hand tighten to the outlet
connecter on the slide bar (F) as shown below.
K
J
□
L
MM
F
DD
CC
D
F1
NOTE: You may need to slightly loosen the set screws before
inserting the connector to avoid damaging the O-rings.
□
K1
□
□
Push the top side of the slide bar onto the connector
(D), place the bottom part of the slide bar to the seat
(F1) and rotate clockwise the bottom part of the slide
part to secure the bottom part tight to the seat (F1).
Tighten the set screws (DD) to lock the slide bar to
the connector as below.
DD
CC
D
F1
NOTE: You may need to slightly loosen the set screws before
inserting the connector to avoid damaging the O-rings.

9HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation
9Finishing the installation
Care and Maintenance
□
□
□Do not use abrasive cleaners when cleaning this wall bar shower kit.
Preserve the finish of the wall bar shower kit using a non-abrasive wax.
When using non-abrasive cleaners, rinse off immediately when finished cleaning the wall bar shower kit.
□Turn the hand shower holder with the large
opening side facing up and set hand shower
into the hand shower holder.
□If low flow rate occurs, please take the restrictor out and clean it.
The restrictor is in the inlet supply line connector.

Moderno kit de ducha con barra de pared,
cabezal de ducha con una sola función,
regadera cuadrada de 8 plg (20.32 cm) y
ducha de mano
GUÍA DE USO Y CUIDADO
GRACIAS
Agradecemos la confianza que has depositado en Glacier Bay al comprar este kit combinado de ducha manual y cabezal de ducha.
Nos esforzamos por crear continuamente productos de calidad diseñados para mejorar su hogar.Vísitenos en internet para ver
nuestra línea completa de productos disponibles para sus necesidades de mejorar su hogar. ¡Gracias por elegir a Glacier Bay!
Problemas, preguntas opiezas faltantes?
Antes de regresar a la tienda, llama al servicio al cliente de
Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los
sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
Modelo núm.
HD58101-X5101
SKU núm.
1002-774-598
304778429HD58101-X5110H